Indicator Stands & Bases - Page 37

Manufacturer: Flexbar Brand: Flexbar

Standard indicator Stands. Quality Made Large Size Stands Mounted on Your Choice of: C-Clamp, Disc Magnet, or On/off Mag Base. Available With or Without Fine Adjustor Rod. Stand Specifications: Lug Back Holder. Accepts All AGD Dial indicators, Stems, etc. Accepts Dial-Test indicators 3/8" and 5/32" Dia. Rugged Locking Knobs - Scriber included. Adjusts in both Horizontal and Vertical planes. Main Post: .470 Dia. x 7" Long. Secondary Post: .385 Dia. x 6" Long. Model No. 18022, indicator Stand on Disc Magnet With Fine adjustor. Low Profile, 100 lb. pull Magnet: 3 1/4" Dia. x .435" High.

Manufacturer: Flexbar Brand: Flexbar

The Original Made in U.S.A. Flexbar. Instant Positioning - instant Locking Universal Holder/Positioners for All AGD indicators and Electronic Sensors (Lug Backs Too!) The Heavy Duty Flexbar is completely Flexible; lets you reach over, under, around, instantly and surely. Elimination of the Large assortment of rods, Swivels, Clamps and other Hardware necessary to reach and Measure in obstructed areas. Cuts Set-up time as much as 75% to 90%. Flexbar Sets and locks With a simple twist of the Lever. Top Mounting Clamp ("B"): (Telescopic Action) Grips objects from .125" up to .510" Diameter. Cable and swaged fittings are stainless aircraft and Mil Spec Grade. Locked by Tensioning of Cable, incredible rigidity is achieved by this design. (No Movement once locked). Cam Action Locking. Model No. 18030, Flexbar 13" Height, With 5/16 Thread. Magnet Not included.

Manufacturer: Anytime Tools Brand: Anytime Tools

Attaches To Any Convenient Object Wear and runout gauge set comes in a convenient molded case. Checks tire and wheel runout, gear backlash, valve guide wear, etc. 12" flex arm can be set to almost any measuring position desired. Indicator features 0-1" travel, and .001" graduations. This tool is useful where you can not use magnetic base. Will attach to any object. Features: Lockable Flexible Shaft1"/0.0005" Dial Indicator IncludedClamp Pliers with attachmentMolded storage case

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-520-950-0

The Fowler 52-520-950 dial indicator with hydraulic-arm magnetic base has an American Gage Design (AGD) Group 2, 2-1/4" dial face with a continuous dial, a 0.40" measuring range, 0.001" graduations, a revolution counter, and tolerance markers, and is designed to measure surface variations in fractions of an inch. The indicator is dust-proof, water-proof, oil-proof, coolant-proof, and shock-proof. The 0-100 continuous dial with revolution counter has a total measuring range of 0.40" and 0.001" graduations, with each revolution equal to 0.1". An adjustable bezel and dial sets the zeros the reading at any location. Tolerance markers allow operators to observe limits at a glance. The magnetic base has a 75-lb. pull and a hydraulic arm that eliminates vibration and movement during use, and can be micro-adjusted on two ball sockets. An on/off lever releases the magnet.The set includes a dial indicator and magnetic base. Dial readings with three digits, 0-10-0 for example, signify that the indicator has a balanced dial. Dial readings with two digits, 0-100 for example, indicate the dial has a continuous dial. Balanced dials are used for reading the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. SpecificationsDial face type and diameter AGD Group 2, 2-1/4" diameter face Dial type and reading Continuous 0-100 Range and graduations 0-0.40" Graduations 0.001" Revolutions Up to 4 revolutions, each revolution equal to 0.10" Contact point construction Carbide contact point with 0.080" diameter Magnetic base pull 75lb. Base dimensions 2 x 2-11/32 x 1-13/16 inches (H x W x D) Specifications AGD Group 2H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Dial indicators are also called dial gauges, probe, and electronic indicators. These precision instruments measure small...

Manufacturer: Hexagon Brand: Standard Gage Model: 01664003

The Standard Gage 01664003 Magnetic Stand has a flexible arm with a fixing bore diameter of 8 to 9.6 mm for holding dial gauges and comparators, and a magnetic base that adheres to metal surfaces with approximately 450 N of holding force and has a V-groove for mounting to cylindrical surfaces. The flexible arm allows for precise positioning of gauges and comparators, and has a dovetail clamp. A switch allows the magnetic force to be turned on and off to aid positioning. The maximum extended length of the arm and post is 280 mm. The stand weighs 1.5 kg. Standard Gage manufactures precision measuring equipment and metrology hand tools. The company is headquartered in North Kingstown, RI.

Manufacturer: Starrett Brand: Starrett Model: 657-2

The very sensitive fine-adjustment is located on the magnetic base to eliminate indicator deflection when it is being adjusted. This versatile indicator holder has three pivots available for positioning the indicator where needed. All pivots are controlled by one tightening knob. It will hold with a 3/8" (9.5mm) stem (such as our No. 25 and Nos. 650 and 651 Series) indicator, any indicator with a standard dovetail mount (such as our Nos. 708, 709, and 811 Series), any indicator with a 1/4" (6.3mm) shank (such as our No. 196 Series). Any indicator with a 3/16" (4.7mm) shank (such as our Nos. 708, 709, 811 and 711 Series), any indicator with a body clamp (such as our No. 711 Series).

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

The Brown & Sharpe Miti-Mite Mini Magnetic Base indicator holder is compatible with dial and dial test indicators, grips three ways, and has an always-on magnetic field. It is smaller than equivalent standard size Brown & Sharpe magnetic bases, for use in tight spaces. The v-base grips to flat and rounded surfaces, while the ball and socket joint at the base of the 5” long rod provides reach and orientation not possible with fixed post holders. The fine rod adjustment helps to get the indicator into place for testing with more ease and accuracy than a base without fine adjustment. The 1-1/4" square x 1-3/4" high base grips horizontally, vertically, and upside-down. For use with all Brown & Sharpe dial and dial test indicators, as well as similar indicators from other manufacturers. Magnetic bases are magnetic fixtures commonly used in metalworking to hold dial indicators, and are also used in other fields, such as optics. Magnetic bases can assist the user with setting up a workpiece in a milling machine, surface grinder, or other machine tool. The vertical post and rod in a magnetic base connect using swiveling connectors, or snugs. This allows free motion of the arm so that the dial indicator can be moved into position on the workpiece. Many magnetic bases have a V-step, which is a V-shaped notch in the base for holding the base to arbors, shafts, and other cylindrical items. The magnetic base has a circular hole through the center. A round permanent magnet is inserted into this hole, and a handle or button is attached to allow the user to rotate the magnet. Rotating the magnet turns the base on and off as this causes the position of the magnetic field to rotate as well. In the on position, the iron is acting as an extension of the magnet, while in the off position, the magnet is acting as a keeper, preventing the magnetic field from extending through the base. Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, played a key role in setting...

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

The Brown & Sharpe Miti-Mite Mini Magnetic Base indicator holder, compatible with dial and dial test indicators, grips three ways, has a v-base, and an always-on magnetic field. It is smaller than equivalent standard size Brown & Sharpe magnetic bases, for use in tight spaces. The v-base grips to flat and rounded surfaces. The 1-1/4" square x 1-3/4" high base grips horizontally, vertically, and upside-down, with a 5-1/4” long tool post. For use with all Brown & Sharpe dial and dial test indicators, as well as similar indicators from other manufacturers. Magnetic bases are magnetic fixtures commonly used in metalworking to hold dial indicators, and are also used in other fields, such as optics. Magnetic bases can assist the user with setting up a workpiece in a milling machine, surface grinder, or other machine tool. The vertical post and rod in a magnetic base connect using swiveling connectors, or snugs. This allows free motion of the arm so that the dial indicator can be moved into position on the workpiece. Many magnetic bases have a V-step, which is a V-shaped notch in the base for holding the base to arbors, shafts, and other cylindrical items. The magnetic base has a circular hole through the center. A round permanent magnet is inserted into this hole, and a handle or button is attached to allow the user to rotate the magnet. Rotating the magnet turns the base on and off as this causes the position of the magnetic field to rotate as well. In the on position, the iron is acting as an extension of the magnet, while in the off position, the magnet is acting as a keeper, preventing the magnetic field from extending through the base. Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, played a key role in setting industrial standards in the United States. Brown & Sharpe was acquired by Hexagon Metrology in 2001 and is headquartered in North Kingstown, RI.

Manufacturer: Starrett Brand: Starrett Model: 657A

Powerful permanent magnet base holds firmly to steel or iron surfaces-horizontally, vertically or upside-down. Inside: (1) Magnetic base.(3) Contact points.(1) Adapter point.

Manufacturer: Flexbar Brand: Flexbar

Indicol Universal Indicator Holder for Milling Machines and Jigborers. Made in U.S.A. Reach from 0-12" Dia. - Larger reach is possible by replacing and using a Longer rod. Guaranteed accurate Readings. Versatility in applications include: Alignment of work -Spindle perpendicularity Checking - Concentricity Reading. Indicator is Not included in prices. Fits All popular indicators With 5/32" shank or Dovetail. Model No. 18131, indicol Clamp 1 7/8" Diameter. (for Bridgeport Mill "J", "2J", Moog, index, Rockmill and Lagun Mills.