Indicator Stands & Bases - Page 5

Manufacturer: STAKF Brand: Starrett Model: 657T

For use with all Starrett Test, Back-Plunger, AGD, Dial, and Miniature Dial Indicators. Also accommodates similar indicators of other manufacturers. The flexible post is an assembly of short tubular steel sections and precision ball joints, linked by an internal steel cable. It can be adjusted to any position and locked by turning a lever near the magnetic base. This makes it possible to use indicators in awkward places that are hard to reach with conventional holding devices. Assembled to the magnetic base, the post has a vertical reach of approximately 15" (380mm) and a horizontal reach of approximately 10" (250mm). The indicator snug on the end of the post can be rotated through 360 degree and locked in any position. The base has three precision ground magnetic contact surfaces. Grips horizontally, vertically or upside down. V-step holds base to arbors, shafts, chucks. Gauge Rod: 3/8" x 3" has 5/16, 1/4 and 7/32" steps, holds nos. 708, 709, 711 and 811 dial test indicators by body clamp.

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

The Brown & Sharpe 599-7746-1 Magnicator Magnetic Base indicator holder with magnetic bottom and two magnetic sides, grips three ways, has an on/off switch, swivel upright post, and is compatible with dial and dial test indicators. The simple on/off switch allows one-handed operation. The v-base grips to flat and rounded surfaces. The 1.9375 x 1.625 x 1.875 inch (H x W x D) base grips horizontally, vertically, and upside-down, with a 7” long swivel tool post that is 0.375” in diameter. (H is the vertical distance from lowest to highest point; W is the horizontal distance from left to right; D is the horizontal distance from front to back.) For use with all Brown & Sharpe dial and dial test indicators, as well as similar indicators from other manufacturers. Magnetic bases are magnetic fixtures commonly used in metalworking to hold dial indicators, and are also used in other fields, such as optics. Magnetic bases can assist the user with setting up a workpiece in a milling machine, surface grinder, or other machine tool. The vertical post and rod in a magnetic base connect using swiveling connectors, or snugs. This allows free motion of the arm so that the dial indicator can be moved into position on the workpiece. Many magnetic bases have a V-step, which is a V-shaped notch in the base for holding the base to arbors, shafts, and other cylindrical items. The magnetic base has a circular hole through the center. A round permanent magnet is inserted into this hole, and a handle or button is attached to allow the user to rotate the magnet. Rotating the magnet turns the base on and off as this causes the position of the magnetic field to rotate as well. In the on position, the iron is acting as an extension of the magnet, while in the off position, the magnet is acting as a keeper, preventing the magnetic field from extending through the base. Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, played a key role in setting industrial standards...

Manufacturer: NOGA Brand: Noga

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

Magnetic measuring support with articulated arm, 390mm height. Magnetic base has 2 flat faces plus 1 prismatic one. The arm supports up to four pounds. Articulations made from duralumin. Disengageable permanent magnet. Dovetail clamp with a 8mm diameter clamping bore. Consisting of: articulated arm, clamp and magnetic base with fine adjust. ≈700 measuring force. V-Base for diameter 30 - 150mm. Magnetic base measures 60mm length by 50mm width by 55mm height. Mass: 1.45 kg or 1.85 kg.

Manufacturer: INSIZE Brand: INSIZE Model: 6291-2

Dial Test indicator centering holder.

Manufacturer: na Brand: Unbranded*

New Universal 3D Deluxe Magnetic Base Holder For Dial Test Indicator w/ Warranty

Manufacturer: INSIZE Brand: INSIZE Model: 6201-60

Magnetic stand.

Manufacturer: Fisso Brand: Flexbar

Microfine Adjustment Only. Model No. 14834, Microfine Adjustment Only. Model: D8, M6 Hole Diameter: 8mm Dovetail: Yes Connection Thread: M6

Manufacturer: Flexbar Brand: Flexbar

The Original Made in U.S.A. Flexbar. Instant Positioning - instant Locking Universal Holder/Positioners for All AGD indicators and Electronic Sensors (Lug Backs Too!) The Heavy Duty Flexbar is completely Flexible; lets you reach over, under, around, instantly and surely. Elimination of the Large assortment of rods, Swivels, Clamps and other Hardware necessary to reach and Measure in obstructed areas. Cuts Set-up time as much as 75% to 90%. Flexbar Sets and locks With a simple twist of the Lever. Top Mounting Clamp ("B"): (Telescopic Action) Grips objects from .125" up to .510" Diameter. Cable and swaged fittings are stainless aircraft and Mil Spec Grade. Locked by Tensioning of Cable, incredible rigidity is achieved by this design. (No Movement once locked). Cam Action Locking. Model No. 18031, Flexbar 13" Height, With 8MM X 1.25 Thread. Magnet Not included.

Manufacturer: INSIZE Brand: INSIZE Model: 6208-80E

Universal magnetic stand.