Test Indicators - Page 48

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe Color: White

The Brown & Sharpe TESA Tesatast series dial test indicator has a white face, a 0.0787" stem diameter, and inch measurements. The indicator can make either horizontal or vertical measurements, and the choice of white or yellow dial help make measurements easy to read. The yellow face with contrasting black hand complies with ANSI standards for metric dial faces. The carbide, ball-contact tip reaches into the workpiece for accurate measurements of turned, milled, and ground parts, and for tool setting gauges, fixtures, and inspections. The continuous clockwise pointer rotation helps prevent plus or minus confusion and displays reading in fractional inches. The ball-bearing lever system swivels through to 180 degrees. The dial face is mounted on the top of the indicator at a right angle to the axis, and two universal dovetail mounts can be used for mounting from the front or back. Dovetail mounts provide a rigid setup. This indicator has a Monoblock body design with pinions mounted in jeweled bearings in an isolated assembly separate from the outer body, for high accuracy. It is anti-magnetic for safety when used around magnetic workpieces and debris, and has full-metal construction for durability and corrosion resistance. This dial test indicator meets Deutsches Institut fur Normung (DIN) 2270, and Norme Francaise (French Institute for Standardization) NF E 11-053 standards, and includes an identification number and a declaration of conformity. The set includes a dial test indicator, a 0.080" (2mm) ball-end carbide contact point, a 0.310"(8mm) extension with dovetail, a point key, a Certificate of Accuracy and Traceability, and a storage box. Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanc...

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-563-772-0 Color: Black

The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.

Manufacturer: ASIMETO Brand: ASIMETO Model: 407-02-3

Digital, Electronic Indicators, ASIMETO, Measuring Range 0 ~ 1" (0 ~ 25mm)

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-562-120-0

The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 513-514T Color: Yellow

The Mitutoyo 513 series Pocket type dial test indicator has a yellow face, a 4mm stem diameter, and metric measurements. The indicator has a reversible measuring direction and an adjustable contact point, and is used to measure surface variations in narrow or recessed areas. The pocket-type dial test indicator has a horizontal face and three dovetail mounts, and can be mounted either horizontally or vertically from either the front, top, or back of the indicator. It has jeweled bearings that provide high sensitivity and accuracy, a reversible measuring direction, and a contact point that can be adjusted within 220 degrees of the axis. This dial indicator meets Japanese Industrial Standard (JIS) B7533-1990. The full set includes a dial indicator, three contact points (1mm, 2mm, and 3mm), two stems (4mm and 8mm diameter), a knurled clamp ring, a swivel clamp, a 100mm metric holding bar, and a plastic storage box.Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Dial readings with two digits, such as 0-100, indicate that the dial has a continuous dial. Balanced dials are used to read the difference from a specific surface reference point. Continuous dials are used for direct readings and usually have a larger measurement range than balanced dials. Optional features include jeweled bearings for high sensitivity and accuracy, and a yellow face that meets ANSI standards for metric indicators.Dial indicators are also called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear distances and object sizes. The dial magnifies the measurement so that it can more easily be read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Standard dial indicators measure the displacement along the axis of th...

Manufacturer: Hexagon Metrology Brand: Brown & Sharpe

The Brown & Sharpe 599-7041 BesTest eight-piece dial test indicator accessory set is for use with Brown & Sharpe Bestest series dial test indicators (sold separately). It includes a rectangular bar, a round bar, a short swivel shank, an angle attachment, two extensions with dovetails, a 0.040" carbide contact point, and a 0.120" carbide contact point. Carbide contact points are wear- and magnetic-resistant.Dial indicators are also called dial gauges, probe, and electronic indicators. These precision instruments measure small linear distances and object sizes. The dial magnifies the measurement so that it can be easily read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Standard dial indicators measure the displacement along the axis of the indicator. Dial test indicators are very similar to dial indicators, except that the axis of measurement is perpendicular to the axis of the indicator. Dial and dial test indicators can be analog, with a mechanical dial, or electronic, with a digital display. Some electronic models transfer the data electronically to a computer for recording and potential manipulation.Brown & Sharpe manufactures precision measuring equipment and metrology hand tools. The company, founded in 1833, is headquartered in North Kingstown, RI. What's in the Box?3" Rectangular bar (5/16 x 3/16 inches [H x W]) with a 0.220" diameter stud7/32" diameter round bar (2-7/8"long) with 0.163" stepped end and 0.220" diameter stud3/8" diameter short swivel shank (1" long)3/8" diameter angle attachment (1" long)0.220" diameter extension with dovetail0.250" diameter extension with dovetail0.040" carbide contact point0.120" carbide contact point

Manufacturer: TECLOCK Brand: TECLOCK

Includes: (1) Fitted case. Dial Color: White Travel|Decimal Inch: 0.04" Dial Diameter: 1-3/8" Point Length: 1.72"

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 513-284GT Color: Yellow

Optional accessories: swivel clamp, holding bar, stem, contact points. Full Set includes Indicator, Knurled Clamp Ring, ø8mm Stem (part number 902804) and ø2mm Carbide Contact Point, as well as ø1mm Carbide Contact Point and ø3mm Carbide Contact Point, ø4mm Stem (part number 190318), 100mm Length Metric Holding Bar (part number 900209) and Swivel Clamp for ø4mm, ø8mm, Dovetail (part number 900321)

Manufacturer: 3m Brand: 3M

Test kits and accessories designed to help your organization meet OSHA fit testing requirements for respirators. The products can be used to check face-to-respirator seal on any particulate respirator or gas / vapor respirator with a particulate filter. For use with 3M Qualitative Fit Test Apparatus FT-10 and 3M Training and Fit Testing Case FT-20

Manufacturer: HHIP Brand: HHIP

0-0.4/.0005 Inch Water-Proof Dial Indicator ~ Robust, shockproof design ~ 1" travel. ~ .001" reading. ~ Continuous reading is 0-50. ~ Tolerance markers. ~ AGD Group 2, 2-1/4" diameter. ~ Lug back and carbide point included. ~ Rubber bellows on stem. ~ Sealed back plate. ~ O-ring seal on safety cap. ~ O-ring protection for bezel and rotating dial.