Thickness Gauges - Page 26

Manufacturer: Mitutoyo Brand: Mitutoyo

Technical Specification Item Dial Thickness Gage Contact Type Flat CERA Flat Contact Dia. 0.394 Range (In.) 0 to 0.500 Resolution (In.) 0.00100 Dial Reading 0-100 Throat Depth 1.18 Features CERA Ceramic Anvils Includes Case, Certificate of Calibration Accuracy +/-0.001 Compliance & Restrictions Compliance and Restrictions None This listing is for each. _DELETE_

Manufacturer: DeFelsko Brand: DeFelsko

The CMP A2 Coating Thickness Gauges Epoxy Coating on Aluminum Plates (4) is ideal for verifying the accuracy and operation of coating thickness gages and are an important component in fulfilling both ISO and in-house quality control requirements. Many organizations require verification of gage accuracy at the test site each time a coating thickness gage is put into service and at frequent intervals during use. Ideal for this purpose, certified coating thickness standards have measured values traceable to a National Metrology Institution.

Manufacturer: Starrett Brand: Starrett Model: 1010RZ Color: White

Handy pocket gauge is approximately the size of a thin pocket watch. Ideal for inspectors, purchasing agents and salespeople to check the size of materials up to 3/8" thick. The gauge fits naturally into the curve between the thumb and index finger. A slight pull on the serrated top plate raises the spindle.

Manufacturer: Checkline Brand: Checkline

The RMU-30 Digital Thickness Gauge, Measuring Range 30 mm is used to determine the thickness of leather, textiles, cardboard, felt, rubber, sheet metal, foil, plywood, plastic, etc.

Manufacturer: Starrett Brand: Starrett Model: 1015A-4

After inserting work between the measuring contacts, releasing the lever will cause the spindle to contact the work, giving an accurate size reading because measuring pressure is independent of the user. Indicators have jewel bearings and continuous dials. Throat depths include 2-1/2", 4", and 6". The contact edges are radiused to prevent the work from being marred or deflected. The flat contact area measures 1/4" in diameter and is 1/8" thick.

Manufacturer: Checkline Brand: Checkline

The P-25DL is a battery powered, portable Dot-Matrix printer for the TI-25DL Ultrasonic Wall Thickness Gauge.   Features   Small, portable and easy to use Prints statistical data from the TI-25DL Ultrasonic Wall Thickness Gauge   [custom1] Print Method Impact Dot Matrix Dimensions 7" x 4" x 3-3/4" Print Speed 40 lines per minute Interface RS232, 25 pin connector Power Internal battery or 7.5 V DC, 750 mA adapter Interface RS232, 25 pin connector Warranty 1 year [/custom1]

Manufacturer: DeFelsko Brand: DeFelsko

The Spare Probe for PosiTector 6000 N Coating Thickness Gauge ( Single Probe ) is a replacement probe for PosiTector 6000. This single probe is supplied with a NIST Traceable calibration certificate.

Manufacturer: Checkline Brand: Checkline

Positector RTR Replica Tape Reader measures and records peak to valley surface profile height using replica tape. Features One-handed menu navigation Automatically subtracts the 50.8 µm (2 mil) incompressible substrate from all readings Solvent, acid, oil, water and dust resistant - weatherproof Shock-absorbing, protective rubber holster with belt clip Certificate of Calibration (Long Form) showing traceability to NIST included Conforms to national and international standards including ISO and ASTM PosiTector body accepts all PosiTector RTR, SPG, 6000, 200, DPM, and UTG probes easily converting from a coating thickness gage to a dew point meter, surface profile gage or wall thickness gage High contrast backlit display for bright or dark environments Uses alkaline or rechargeable batteries (built-in charger) USB port for fast, simple connection to a PC and to supply continuous power. USB cable included Screen Capture - record and save image into USB flash memory for record keeping and review Software updates via web keep your gage current RESET feature instantly restores factory settings Minimizes inspector workload by reducing the number of replicas needed to ensure accuracy Rugged indoor/outdoor instrument - ideal for field or shop use Measures height (H) and linearized height (HL) Check Shim provided to verify accuracy Mils/Microns switchable Display Languages: English, French, German, Spanish, Japanese, Chinese, Korean, Dutch, Portuguese, Italian, Norwegian, Russian, Czech, Polish and Turkish. Flip display enables right-side-up viewing Continually displays/updates average, standard deviation, min/max height and number of readings PosiSoft solutions for viewing, analyzing & reporting data Every stored measurement is date and time stamped Two (2) year warranty on body AND probe [custom1] Measurement Range 20 to 115 µm (0.8 to 4.5 mils) Accuracy (H) ± 5 µm (± 0.2 mils) Resolution ± 1 µm (± 0.2 mils) Anvil Diameter ⌀6.3 mm (⌀0.25 inch) Anvil Pressure 110 grams-...

Manufacturer: DeFelsko Corporation Brand: DeFelsko Model: DFTF-B

The PosiTest DFT is the economical choice that provides the proven quality of DeFelsko inspection instruments. Fast, repeatable measurements and NO calibration required for most applications make the PosiTest DFT ideal for powder coaters, paint applicators, coating inspectors, automotive resellers/refinishers, and more. The PosiTest DFT Ferrous measures non-magnetic coatings on steel up from 0-40 mils (1-1000 microns). The PosiTest DFT Combo measures non-magnetic coatings on steel AND non-conductive coatings on aluminum, brass, etc. from 0-40 mils (1-1000 microns). The PosiTest DFT Combo instantly and automatically recognizes the substrate and takes a measurement. Made in the USA, the PosiTest DFT features DeFelsko's legendary quality in a simple, easy-to-use format. Each PosiTest DFT features a strong, wear-resistant, ruby-tipped probe which won't wear down over time, eliminating the need for periodic calibration adjustments and maximizing the life of the instrument. The PosiTest DFT comes with a full 2-year warranty on the gage and probe. The PosiTest DFT features advanced calibration adjustment features typically seen on more expensive instruments. The zero feature allows users to adjust for rough or curved surfaces. The 1-Point Calibration Adjustment feature allows users to adjust to the known thickness of a shim placed over rough or curved surfaces. A handy reset feature returns the instrument to out-of-the box factory settings, to return the instrument to the factory calibration. The PosiTest DFT conforms to the following standards: ISO 2178/2360/2808, prEN ISO 19840, ASTM B244/B499/B659/D1186/D1400/D7091/E376/G12, BS3900-C5, SSPC-PA2 and others.

Manufacturer: SH Brand: SH

Features: • Through coating measurement for gauging thickness of a painted object without removing the non mental coating.• Thin coating mode and thick coating mode • Available for gauging various materials such as metal, glass, plastic, rubber and etc. • High measurement accuracy and wide range gauge applications • Suitable for pipe gauging. • Whole range transducer models are available for almost all kinds of application, including coarse grain material gauging and high temperature applications (Max. temperature up to 300ºC). • Adaptive probe function built in: Patent technology of automatic probe recognition: Automatically recognizing for probes allowing the gage to match with probes made from various probe manufacturers. • Power on automatic testing function contributing to measurement accuracy increasing. • Auto power off detection and customizing power off configuration. • Probe Zero function, Sound Velocity Calibration function. • 9 velocities built in and programmable. • Several practical measurement modes available: Standard Mode, Scanning Mode, Difference Mode, Average Mode, Maximum limitation Alert Mode, High Temperature Mode(Should be matched with high temperature probe). Standard Configuration • Main Unit One Set • Probe One Set(5MHz, Φ10mm) • Guide Manual • Hermetic Plastic Kit (18cm X 15cm X10cm) • USB Cable • Software Disk.