Snap Gauges - Page 17

Manufacturer: Flexbar Brand: Flexbar

Flexbar Snap Gages - Type "U" Style A U-shaped Go/No-Go gage with hardened, adjustable anvils on opposite ends used to inspect the length of part features. Features special grooved top and bottom anvils for groove and recess applications. Model No. 11-3009, Flexbar Snap Gage, "U" Style. •Frame No.: 5X •Range: 2 - 2 1/2

Manufacturer: Flexbar Brand: Flexbar

Flexbar Snap Gages - Type "U" Style A U-shaped Go/No-Go gage with hardened, adjustable anvils on opposite ends used to inspect the length of part features. Features special grooved top and bottom anvils for groove and recess applications. Model No. 11-3010, Flexbar Snap Gage, "U" Style. •Frame No.: 6 •Range: 2 1/4 - 2 1/2

Manufacturer: INSIZE Brand: INSIZE Model: 2187-101

Adjustable snap gage, 3.74-3.98".

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 201-108

Recommended dial indicator (optional): 2046SB (0.01mm reading), 2109SB-10 (0.001mm reading); Gauge stem diameter: 8mm; Measuring force: 15N +/- 3N; Parallelism: 5 micrometer or less; Anvil flatness: 0.00004" / 1 micrometer.

Manufacturer: Bowers Brand: Bowers

Fowler-Bowers External Snap Gage frame can be used with a Sylvac probe to provide exceptional accuracy. Data is read on a Sylvac Digital Indication Unit in inch or metric, resolution to 0.0001" or 0.001mm, 0.0001mm. Allows absolute or comparative measurements. The frame serve as snap gages with the quick action push button. Its design allows one-hand operation, and spring loading ensures correct measuring force at all times; there's no "operator feel" to interfere with accuracy.

Manufacturer: Starrett Brand: Starrett Model: 1150Z-2

The Starrett 1150Z-2 Inch Reading Dial Indicator 81-111-1150 Snap Gauge is used for measuring the outer diameter (OD) of workpieces 0-2” in diameter, has precise dial graduations of 0.0001”, dial readings of + or - 10, and a total measurement range of 0.040”. The 5/16” hardened steel contacts and backstop are precision ground, lapped flat, and keyed to maintain orientation of faces. The backstop can be adjusted to center the workpiece, and the top contact can be reversed to present a spherical surface to the workpiece. The indicator face rotates 360 degrees and locks in place for reading from any direction, and has a double row of graduations for reading in opposite directions, with minus graduations printed in red and plus graduations printed in black for readability. A fine adjustment screw provides hand zeroing. Dial indicators may also be called dial gauges, dial calipers, and probe indicators. These precision measuring tools are used to accurately measure small linear distances and object sizes. The dial magnifies the measurement so that it can more easily be read by the human eye. Frequently used in manufacturing, laboratories, and other industrial or mechanical fields, dial indicators are used anywhere a small measurement must be found and recorded or transferred, such as checking the variation in tolerance of a workpiece. Dial test indicators are very similar to dial indicators, except that the axis of measurement is perpendicular to the axis of the indicator. Standard dial indicators measure the displacement along the axis of the indicator. Dial indicators can be analog, with a mechanical dial, or electronic, with a digital display. Some electronic models transfer the data electronically to a computer for recording and potential manipulation. The L.S. Starrett Company manufactures precision measuring tools, metrology and testing equipment, and saw blade products. The company was founded in 1880 and is headquartered in Athol, MA.

Manufacturer: YPG Gages Brand: YPG Gages Model: U3

Sound, structurally stable, design and specifications, coupled with a highly experienced, solid manufacturing and quality management system, guarantees YPG Adjustable Limit Snap gages supplied into the USA market are of the highest quality. gages can be 'Set, Sealed and Certified' to pre-determined Go/No Go sizes in YPG's accredited calibration laboratory. A fully stabilized cast iron frame forms the base of the 'U' type adjustable limit snap gage. The one piece, knife edge, rectangular anvil and the two knife edge, adjustable anvils are all manufactured from hardened, lapped, tool steel. The blades of the type 'U' make its primary use that of gauging the lower diameter of external grooves. Having only two adjustable anvils, the Go/No Go setting procedure is quick and straightforward. The blades are supplied with a standard thickness and depth, both of which can be modified by YPG to meet specific customer application requirements. Radius and chamfer changes can also be modified on request. In addition the 'U' type is very readily used as a more robust replacement for the "Reef" type gage. The Quality Management System operated by YPG is ISO 9001-2000 registered. This certification encompasses the entire organization and confirms the company's management system meets the required standard and in particular confirms the desire to exceed customer expectations and to be continually improving the products and services offered. All gages set at YPG are done in the company's state of the art, A2LA certified metrology laboratory. Product certification can be supplied on any gage calibrated or set in the laboratory. Adjustable Limit Snap Gages are precision gauging devices generally used in a production environment for the rapid, accurate and foolproof inspection of component parts during and after a production. There are certain basic rules which need to be followed to ensure adjustable limit snap gages perform to their expected accuracy and have a long operational life. 1/4" - 1/2" inch range and 6 - 13mm metric range.

Manufacturer: Flexbar Brand: Flexbar

Flexbar Snap Gage. Model CS Type: C (2 Round buttons and Anvil) Frame No. 10 Range: 4 15/16 - 5 5/16

Manufacturer: Flexbar Brand: Flexbar

Flexbar Snap Gage A U-shaped Go/No-Go gage with hardened, adjustable anvils on opposite ends used to inspect the length of part features. •Model AR •Type: A (2 round buttons top and bottom) •Frame No. 9 •Range: 4 1/2 - 5 1/4 Model No. 11-2009, Flexbar Snap Gage

Manufacturer: INSIZE Brand: INSIZE Model: 2187-70

Adjustable snap gage, 2.48-2.76".