|
|
-
3.0 of 5.0 with 2 Reviews
SALE PRICE: $10.66
Manufacturer: uxcell
Brand: uxcell
Model: a12082900ux0630
Manufacturer: uxcell
Brand: uxcell
Model: a12082900ux0630
There are Outside and Inside Calipers. Great for you to measure the external and internal size of an object. Inside calipers are available in the same size range as outside calipers. They have straight legs, turned out at the top and are used to take inside measurements.Â
-
3.0 of 5.0 with 2 Reviews
SALE PRICE: $11.40
Brand: Generic
3 New Inside & Outside Precision CalipersThis is a new set of 3 inside and outside precision calipers. These are used for measuring inside and outside diameters.You receive: One outside caliper that measures approximately 9 3/8" (238 mm) long. One inside caliper that measures approximately 9 1/2" (241 mm) long. One inside caliper that measures approximately 9 1/4" (235 mm) long We work hard to update our descriptions and pictures of our merchandise. As part of a process of ongoing innovation by our suppliers, newer versions of the item shown may be shipped before we are able to complete an update. As a result there may be a slight variation in color and design.
-
3.0 of 5.0 with 2 Reviews
SALE PRICE: $14.99
Manufacturer: Shinwa
Brand: Shinwa
Manufacturer: Shinwa
Brand: Shinwa
This is a set of 200 mm / 8 inch firm joint dividers made by Shinwa. Legs are a full .390 inches wide and .270 inches at the base. The tips are hardened and sharpened to a fine point. The tips match up perfectly when closed. This a a good quality, heavy duty tool and a great price.
-
3.0 of 5.0 with 2 Reviews
SALE PRICE: $24.80
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 950-241
Manufacturer: Mitutoyo
Brand: Mitutoyo
Model: 950-241
|
The Mitutoyo 950-241 hermaphrodite caliper with a 4†range is used to scribe lines a set distance from any workpiece edge. The curved leg is run along a surface edge while the scriber marks at a preselected distance, designating a line parallel to the workpiece edge. This caliper is made of high carbon steel with a brushed, natural steel finish. The 950-241 takes measurements in both inch and metric units. The inside depth is 6". The measuring range maximum is 4"/100 mm. Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, machining, manufacturing, carpentry, and medicine. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers all give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw, and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel to the main scale for an additional, fractional reading to improve measurement precision. The dial caliper has a circular dial with a pointer on a toothed gear rack replacing the second vernier scale. As with the vernier, this second measurement is added to the reading from the main scale to obtain the result. The dial caliper is used for measuring size differential between two objects, as well. The digital caliper takes the same sort of differential measurements as the dial caliper by zeroing the display at any point along the slide, with an LCD (replacing the dial) that displays a single, easily read value in both English and metric units. Some digital calipers can hold data readings between measurements and send them to data collection devices. Mitutoyo manufactures precision measuring tools, metro...
-
3.0 of 5.0 with 1 Reviews
SALE PRICE: $29.99
Manufacturer: SE
Brand: SE
Manufacturer: SE
Brand: SE
Features:* Essential instrument set for engineers, machinists, gunsmiths and woodworkers* Provides quick and accurate inside or outside measurements* Calibration screws allow for instrument adjustment without removal from work-piece* Include: 8" divider, 8" inside caliper, and 8" outside caliper
-
2.3 of 5.0 with 8 Reviews
SALE PRICE: $10.99
Manufacturer: ToolUSA
Brand: ToolUSA
Manufacturer: ToolUSA
Brand: ToolUSA
This 7" Set Gives You Both Straight And Rounded Calipers To Measure With Inside, Outside, And Divider. Locking Screw Mechanism Assures Accuracy. Adjustable Screw Is About 2" Long And The Knob Is About 1/16" To Make Overall Screw Length Little Less Than 2". * Durable And Reliable * Made Of Aluminum * Professional Quality BLACK FRIDAY Specials -Cyber Monday & Holiday Deal
-
2.3 of 5.0 with 8 Reviews
SALE PRICE: $21.85
Manufacturer: HAWK
Brand: Hawk
Model: TZ4512
Manufacturer: HAWK
Brand: Hawk
Model: TZ4512
Product Description: 3 Pc Caliper Set - Inside-Outside and Divider by HAWK Features: 12 Inch Caliper Set 1 - Inside Caliper 1 - Outside Caliper 1 - Divider Caliper Calipers may be Black or Silver in color depending on what the Manufacturer sends us. SHIPPING
-
2.0 of 5.0 with 1 Reviews
SALE PRICE: $33.99
Manufacturer: FindingKing
Brand: FindingKing
Manufacturer: FindingKing
Brand: FindingKing
This 6 Piece Kit Includes Inside & Outside Precision Divider Calipers Measuring Tools 3 New Inside & Outside Precision Calipers This is a new set of 3 inside and outside precision calipers. These are used for measuring inside and outside diameters. You receive: One outside caliper that measures approximately 7 1/4" (184 mm) long One inside caliper that measures approximately 7 1/4" (184 mm) long One inside caliper that measures approximately 8" (203 mm) long 3 New Inside & Outside Precision Calipers This is a new set of 3 inside and outside precision calipers. These are used for measuring inside and outside diameters. You receive: One outside caliper that measures approximately 13 1/2" (34 cm) long One inside caliper that measures approximately 14" (35.5 cm) long One inside caliper that measures approximately 13 3/8" (34 cm) long
-
2.0 of 5.0 with 2 Reviews
SALE PRICE: $47.00
Manufacturer: Starrett
Brand: Starrett
Model: 27-6
Manufacturer: Starrett
Brand: Starrett
Model: 27-6
|
The Starrett 27-6 improved firm-joint inside caliper has a leg length of 6†(150 mm) but opens to approximately one-third larger than the leg length. The joint allows for tension adjustment, while the tension will not change if the legs move. The legs are made from a high-grade steel and are ruggedly constructed and well-finished. Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, machining, manufacturing, carpentry, and medicine. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw, and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel to the main scale for an additional, fractional reading to improve measurement precision. The dial caliper has a circular dial with a pointer on a toothed gear rack replacing the second vernier scale. As with the vernier, this second measurement is added to the reading from the main scale to obtain the result. The dial caliper is used also for measuring size differential between two objects. The digital caliper takes the same sort of differential measurements as the dial caliper by zeroing the display at any point along the slide, with an LCD (replacing the dial) that displays a single, easily read value in both English and metric units. Some digital calipers can hold data readings between measurements and send them to data collection devices. The L. S. Starrett Company was founded in 1880, originally manufacturing bench vises, squares, and other tools. They acquired other companies throughout the years, expanding their services into making prec...
-
2.0 of 5.0 with 2 Reviews
SALE PRICE: $67.99 3% OFF
Manufacturer: Starrett
Brand: Starrett
Model: 27-12
Manufacturer: Starrett
Brand: Starrett
Model: 27-12
|
The Starrett 27-12 improved firm-joint inside caliper has a leg length of 12†(300 mm) but opens to approximately one-third larger than the leg length. The joint allows for tension adjustment, while the tension will not change if the legs move. The legs are made from a high-grade steel and are ruggedly constructed and well-finished. Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, machining, manufacturing, carpentry, and medicine. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw, and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel to the main scale for an additional, fractional reading to improve measurement precision. The dial caliper has a circular dial with a pointer on a toothed gear rack replacing the second vernier scale. As with the vernier, this second measurement is added to the reading from the main scale to obtain the result. The dial caliper is used also for measuring size differential between two objects. The digital caliper takes the same sort of differential measurements as the dial caliper by zeroing the display at any point along the slide, with an LCD (replacing the dial) that displays a single, easily read value in both English and metric units. Some digital calipers can hold data readings between measurements and send them to data collection devices. The L. S. Starrett Company was founded in 1880, originally manufacturing bench vises, squares, and other tools. They acquired other companies throughout the years, expanding their services into making pr...
|
|