Digital Calipers - Page 15

Manufacturer: Accusize Co. Ltd. Brand: Accusize Industrial Tools Model: P920-S216-B216

6'' x 0.001'' Precision Dial Caliper Stainless Steel in Fitted Box, Black Dial Face, #P920-B216 •Black dial face, Range: 0-6'', Resolution: 0.001'' •Hardened stainless steel •Graduation 0.001 per revolution and covered rack •0.100" single revolution •Direct reading to .001'' in large clear dial/.-100 •Measuring face hardened, precision ground and micro-lapped for absolute accuracy •Adjusting slide for fine adjustment •Widely spaced and micro-fine graduations. •Inside, outside, and depth measurements •Satin chrome finish, crisp engraved graduations , jaws with lapped measuring face •Clamp for repetitive setting •Accurate to .001'' per 6'' •Adjustable bezel with locking device •4 ways measurements for outside, inside, depth and step •Covered rack •Deluxe case and 1 pieces of 6'' x 0.001'' Precision Dial Caliper Stainless Steel in Fitted Box, #P920-S216 •Range: 0-6'', Resolution: 0.001'' •Hardened stainless steel •0.100" single revolution •Direct reading to .001'' in large clear dial/.-100 •Measuring face hardened, precision ground and micro-lapped for absolute accuracy •Adjusting slide for fine adjustment •Inside, outside, and depth measurements •Satin chrome finish, crisp engraved graduations •Clamp for repetitive setting •Accurate to .001'' per 6'' •Covered rack •Deluxe case

Brand: Oria

Description:Need an accuracy measurement? Oria® IP54 Electronic Digital Caliper can meet your need!This measuring device is of high quality with an extra-large LCD screen for exact internal and outside measurements whose revolution is 0.0005"/0.01mm/1/64. It can be set to zero at any position, displays immediately when pulling it and save up the steps of starting up, 5 minutes automatically shut off.With this caliper, you can easily get the exact measuring of both of the Inside and outside diameter of an object as well as the depth and etc. Specification:●Gross weigh: 400g●Product Dimensions: 10.1 x 4.3 x 0.8 inches●Measuring range: 0-150 mm/ 0-6 inch.●Resolution: 0.0005"/0.01mm/1/128.●Accuracy: ≤±0.02mm ●Power: 1x 3V CR2032 battery (battery & replacement included)●Hardened stainless steel●IP54: Splash water, oil and dust resistant

Manufacturer: UBANTE Brand: UBANTE Color: Green+Silver

UBANTE Premium Precision Professional Grade Tool Super high quality measuring device. Easy read with the largest LCD display available. No other caliper offer you 4 digits decimal in SAE mode or 1/128" fractional display. *Digital Caliper made entirely of stainless steel. Can measure in 3 ways - inch/metric/fraction *Offers extreme accuracy and can be reset at any time. The numbers displayed on the LCD screen are clear, large and easy to read. *Has a number of measuring options .Can be used to measure length, depth, external and internal scope. Easy and comfortable to operate and made from premium quality stainless steel. *Has a strong and long life battery. *Includes helpful and easy to read operating instructions.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 500-197-30 Color: Stainless Steel

The Mitutoyo 500-197-30 digital caliper has a 0 to 8" (0 to 200mm) measuring range with 0.0005" (0.01mm) increments for precision and an advanced onsite sensor (AOS) electromagnetic inductive sensor for resistance to dirt, oil, and water. Its digital readout LCD shows inch or metric units for versatility, and allows either absolute or incremental measurement readings. The electronic caliper measures inside, outside, depth, and step values for versatility and includes a protective case and SR44 silver oxide battery.Digital calipers are measuring instruments commonly used for inspection in manufacturing to provide the precise measurements of an object. A pair of jaws attached to a long beam with a marked scale is used to take inside, outside, and step measurements. An additional depth probe slides along the beam to take depth measurements. One jaw is fixed to the end of the scale, while the other jaw slides along it with gearless precision to take measurements. The reading is electronically generated and displayed on a digital, high-resolution screen as a single value. Digital calipers can take differential measurements, which are used to determine the difference in measurements between two objects, by zeroing the display at any point along the scale. Some digital calipers can switch between standard and metric units, and some can output readings to a computer or printer for recording measurements. Compared to dial calipers, digital calipers provide measurements that are faster, easier, and more error-free, but they are more fragile mechanically and electronically, and do not resist coolant well. Vernier calipers are more durable than digital calipers because they do not have internal moving parts, but they can be more difficult to read. Digital calipers are commonly used in fields such as metalworking, mechanical engineering, machining, carpentry, and medicine.Mitutoyo manufactures precision measuring tools, metrology equipment, and related systems. The company, founded in Tokyo in 1934, formed Mitutoyo America Co...

Manufacturer: Creative Electronic Brand: Creative Electronic

Secification: Three Range for your choice: 0-150mm / 0-6",0-200 mm/0-8",0-300 mm/0-12" Resolution: 0.01mm / 0.0005" Accuracy: ±0.03mm Repeatability: 0.01mm Fine adjustment with thumb roller Depth bar: Blade Battery: SR44 Functions: Origin-set, Zero-set, Inch/mm, Automatic, Low Voltage alarm, Counting Value Composition Error alarm What's in the Box? 1xDigital Caliper 1xSR44 battery 1xProtective case Seller Warranty: *30 days Money Back Guarantee *Lifetime Support Guarantee *For any possible defective products, please contact us first, we will offer you a replacement or refund you.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 500-193

The Mitutoyo ABSOLUTE 500 series caliper is a Digimatic digital caliper that is made of durable hardened stainless steel and uses Mitutoyo’s ABSOLUTE linear encoder technology, which allows you to “set and forget” the origin and measure in awkward or difficult locations. This digital caliper has LCD readout and function control buttons on the caliper face, including Origin to set and retain the original measuring point, and Zero/ABS (Absolute Scale) to zero-set the LCD display. It uses the metric measuring system. Although identical to dial and vernier calipers in its ability to make precise measurements, the digital caliper also has an LCD, which clearly shows values and increases reading reliability over the other types, and reflects all ABSOLUTE system activities. The Absolute Scale (ABS) function tracks the origin point you set, even after shutoff. Once on again, the caliper can immediately start measuring, without zero resetting or concern of overspeed errors. The LCD can be "zeroed out" before making and comparing incremental measurements without having to subtract the first measurement from the second. The calipers use the ABSOLUTE electrostatic capacitance linear encoder which helps prevent overspeed errors. They measure outer diameter (OD), inner diameter (ID), depth, and step, where the butt end of the fixed jaw measures one end of a work piece before its upper/lower or inner/outer "steps" are measured. LCD Resolution is 0.01mm. Also included are origin-setting, zero-setting, and on/off automatic shutoff function buttons. A Digital LCD Data Reading Hold function is available with the optional Data Hold Unit (sold separately). An alarm alerts the user to low voltage and scale contamination and counting value composition errors. A rolling thumb wheel makes fine adjustments and a thumb screw locks the scale’s position. Response speed is unlimited. Each caliper includes, and is powered by, one SR44 silver oxide cell battery that lasts approximately 3.5 years with continuous nor...

Manufacturer: Bestpriceam Brand: Bestpriceam (TM) Model: 2324-8R98-76r246 Color: Black

Suitable for measuring the inner diameter, outer diameter, depth and step four functions for direct measurement and comparison measurement Function: any position zero, metric conversion, manual switch, automatic power-off An ideal tool Digital Vernier Caliper for a broad range of industrial and automotive applications Internal, external and height dimensions can be easily and accurately measured Linear capacitive measuring system Zero setting in any position Measuring range: 0-150 mm/ 0-6 in. Accuracy: + 0.02 mm/ 0.001 in. Resolution: 0.1mm/ 0.01 in. Package Included: 1PC 150mm Electronic Digital LCD Vernier Caliper Gauge Micrometer (With retailing packing) Bestpriceam (TM) Please note: 1. Bestpriceam(TM) is US brand producing a full line of accessories for all kinds of electronic products, beauty items and so on. 2. Bestpriceam are dedicated to creating products that provide our Amazon customers satisfaction beyond expectations. 3. Bestpriceam highly appriciate all customers' opinions to improve the selling ,also if anything you unsatisfied, please feel free to contact us for the best solution. We are always ready to help you!

Manufacturer: Grizzly Brand: Grizzly Model: H5922

This solid Brass Caliper measures inside and outside dimensions up to 4" or 100mm in 1/16" or 1mm graduations. Great for measuring wood thickness!.

Manufacturer: Ingooood_Digital_001 Brand: Ingooood

Features: 100% brand new and high quality Made of strong Plastic carbon fiber composites, lightweight and durable Two way measurement, internal and external Linear capacitive measuring system Zero setting in any position With easy to read large LCD display Minimum scale to read is 0.1mm / 0.01 inch An ideal tool for a broad range of industrial and automotive applications Specifications: Measuring Range: 0-100 mm / 0-4 inch Resolution: 0.1 mm / 0.01 inch Display: LCD screen Power: One Battery (included), LR44/AG13 1.5V Color:Silver+Black Weight:70g Packing content: 1 x Electronic Digital Caliper 1 x 1.5V Button Cell 1 x Hard Storage Case

Manufacturer: AB Tools Brand: A B Tools

Precision made Vernier slide calliper. Steel construction. Can measure internal and external sizes. Also can measure hole/tread depth with the built in depth stop. A simple way to make accurate measurements of internal and external distances of up to 150mm. Fitted with locknut for holding the Vernier position and for repeat measurements. Provided with a sturdy padded plastic case for protection when not in use. Includes depth measuring tool. Can display in Metric or SAE. Measuring Range 0150mm (06") Accuracy plus or minus 0.02mm (0100mm range) and plus or minus 0.03mm (100mm plus range) Accuracy is also effected in areas of very high humidity (over 80%). Features data output connector for compatible devices. Supplied with a 'display' battery in the tool, but this will not last long. The proper battery is supplied in a small packet and should be inserted once the display one goes flat.