Digital Calipers - Page 38

Manufacturer: Grizzly Brand: Grizzly Model: H7978

Large LCD readout converts to decimal inch, fractional inch and millimeters with the push of a button. Measure internal, external dimensions, depth, steps and differential measurements. Features thumb roll and stainless steel construction. Range: 0-6", 0-150mm. Resolution: 0.0005", 0.01mm, 1/128".

Manufacturer: Brand new Brand: Brand new

Features: Measures disc brakes and rotors For use with 6" and 8" calipers Contact points can be attached from the inside for rotors or outside for drums. Includes: set of 2 clamps 4 set screws 1 Allen wrench 1 set of 3-3/4" contact points 1 set of 3/4" cone contact points 1 set of 3/4" flat contact points Caliper in photo not included

Manufacturer: Accusize Co. Ltd. Brand: Accusize Industrial Tools Model: 1110-0828

Manufacturer: Brand new Brand: Brand new

- 3 UNIVERSAL SYSTEMS OF MEASUREMENT - 3 mode digital display easily switches from inches, millimeters and fractions - LIGHTWEIGHT, NON-MARRING - caliper is made of lightweight, non-marring carbon fiber composite - DELIVERS ACCURATE READINGS - for inside, outside, depth & step measurements - ACCURACY/RESOLUTION - accuracy plus or minus 0.004-Inch which is plus or minus 0.1-Millimeter Resolution 0.0005-inch - AUTO ON/OFF FEATURE; Also INCLUDES - convenient pocket clip, power source: LR44 battery

Manufacturer: Igaging Brand: iGaging

Decimal inches are displayed in .001" increments, fractions down to 1/64th increments and millimeters in .01 mm increments. This unit has a remote display with rare earth magnets on the back and a 50" cord that can be mounted to any surface to provide easy access and visibility. The large, easy to read display reads in inch decimal (.001) with fractions (1/64") or millimeters (.01 mm). Accuracy +/- .002" per 6" or .025 mm per 150 mm (Note: others on Ebay are advertising an accuracy of .001" per 6". This is simply not true. All of these DRO units are made by Igaging and accuracy outlined the provided literature as .002" per 6". ) Repeatability .001" or .05 mm Range: 0-6" or 150 mm Alloy 2 in 1 vertical and horizontal beam that can be cut to any desired length Includes both vertical, horizontal and slider mounting hardware Can set "zero" anywhere within operating range with a push of a button allowing you to determine relative distances . Includes mounting hardware kit )see pic 2) and 4 each 3V CR2032 batteries.

Manufacturer: M&A INSTRUMENTS INC Model: DY2201

*Features *Patented mis-operation prevention: terminal shutter interlock mechanism, patent code: ZL 01 21 5021.5 (DY2201) *Measurement of motor dwell angle 0°~120°(3/4/5/6/8 CYL) *Measurement of motor speed 500RPM - 10000RPM(3/4/5/6/8/ CYL) *Feature rich design DMM with up to 11 functions *Continuity buzzer / Data hold / Auto Power off *Heavy duty rubber holster *Specifications *Automotive Multimeters *MODEL:DY2201 *DC V:2/20/200/1000 V ±(0.5%+3) *AC V: 2/20/200/700 V ±(1.0%+3) *DC A:20m/200m/20 A ±(1.0%+2) *AC A:20m/200m/20 A ±(1.5%+2) *Resistance:200/20K/200K/20M Ω ±(1.0%+3) *Temperature:-40°C~1000°C ±(1%+3) *Party cycle:1%~90% *TACH 500-10000RPM 3/4/5/6/8CYL ±(1.5%+5) *DWELL:0°~120° 3/4/5/6/8CYL ±(1.5%+5) *Power 6F22(9V) *Product Size:200*85*38 mm *Product Net Weight:700g *Standard individual packing:gift box *Standard Quantity per Carton 20 pcs. *Measurement of Standard Carton 480*370*335mm (0.059 CBM) *Gross weight of Standard Carton 18kgs

Manufacturer: Elecall Brand: Elecall

Product Features: Elecall Digital Caliper ,Made of hardened stainless steel Internal, external and height dimensions can be easily and accurately measured Linear capacitive measuring system Zero setting in any position With a small locking thumb screw which locks the jaws in place Base measuring function: Inside, outside, depth and step measuring With easy to read large LCD displayHandy conversion chart at the back An ideal tool for a broad range of industrial and automotive applications Specifications: Resolution: 0.01mm/ 0.0005 in. Repeatability: 0.01mm/ 0.0005 in. Accuracy: ±0.01mm Package Content: 1* vernier caliper

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 54-554-830-0

The Fowler 54-565-233 High-Accuracy Ultima Bore Gauging System has a measurement range of 7.878 to 8.27" and is accurate to + or - 0.00006". Resolution is 0.00001" and the measuring depth is 3.15". The gauge has constant spring pressure for repeatability and Bower's FastFit measuring heads for rapid measurement. It uses a three-point contact system for the detection of lobing or triangular form error, and ceramic contact points provide high durability and stability with regard to thermal expansion. The Ultima system requires connection to a Sylvac or multiplexer display unit.This product has 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims.

Manufacturer: Puntung shop

Description : 0.01mm 0-150mm IP54 Waterproof Digital Vernier Caliper Measuring tool Hardened stainless steel main scale and measuring jaw. It is made of hardened stainless steel material and relative measurement Zero-setting at any position mm/inch measurement system conversion IP54 waterproof. its complete sealed module structure, provide it with certain resistance to water, oil and coolant Measuring types : internal dimension, external dimension,steps and depth and so on High quality LCD display Measuring range:0-150mm/0-6inch Resolution:0.01mm/0.0005inch Accuracy:±0.02mm Maximum measuring speed:3000mm/sec Grade A electrostatic protection Battery type: 3V lithium CR2032 battery USB interface allows data to be outputted to a printer or computer for data processing and printing Glass fixed grib, stable and high accuracy Note : 1.Avoid exposure to put the caliper in the place where with more dust, avoid sunlight ultraviolet radiation and high temperature. 2.When mobile ruler frame should be balanced to avoid the drop impact. 3.Can use the gasoline or alcohol to scrub caliper' measurement face, electronic components and the ruler body to avoid contact any liquid. Package included : 1 x Professional IP54 Waterproof Digital Caliper 1 x English User Manual 1 x Cover Case

Manufacturer: iGaging Brand: iGaging Model: 100-300-8

Make extremely precise measurements with this high quality stainless steel caliper. The EZ Cal digital caliper is fast and accurate - no more eyestrain or guesswork, thanks to its Super large LCD display. It features adjustable jaws that read inside and outside dimensions, and also has an extension rod for depth measurements. The readout shows the entire measurement in inches to 0.0005 inch, millimeters to 0.01mm and Fractions of an inch to 1/128 inch. Auto off/on and auto zero functions are available at the touch of a button. Its humidity and dust resistance. Comes packaged in a sturdy plastic storage case with an extra 3V CR2032 battery.