Vernier Calipers - Page 21

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 530-114

The Mitutoyo 530 series vernier caliper has two sets of jaws and a depth bar for four-way measurement in inch and metric units of outside dimension (OD), inside dimension (ID), step, and depth, for applications where the highest accuracy is required, especially in scientific research and in industries where parts must fit exactly. The caliper has a dual vernier scale, with an upper scale measuring in inches and a lower scale measuring in millimeters. A 14-degree vernier face angle improves visibility and helps prevent parallax error in measurement reading. The caliper’s two sets of jaws provide the capability to make OD and ID measurements, as well as step measurements, where the butt end of the fixed jaw measures one end of a work piece before its upper/lower or inner/outer steps are measured. A depth measuring blade with rounded edges provides the ability to make depth measurements. The scales are raised to slide easily and protect the graduation markings. A thumbwheel permits fast and easy measuring. A clamping screw on the upper scale rotates to control scale movement and locks to hold the sliding jaw’s position. The caliper is made of hardened, corrosion-resistant stainless steel with a satin chrome finish that helps reduce glare. The caliper meets Federal Accuracy Specifications GGG-C-111B. Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, and machining. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw, and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel ...

Manufacturer: BUTW Brand: BUTW Model: 8941D

You Get FOUR 6" dual sided plastic calipers made from a flexible and durable plastic composite material. Measures in SAE and MM

Manufacturer: USS Brand: USS Color: Stainless

HATE PLASTIC CALIPERS? Banish plastic calipers. Replace them with these brushed stainless steel locking calipers. They measure spans up to 5" in 1/16" increments and 125mm in 1mm increments, and these are real beauties. Terry's buying a pair to use as a paperweight and have them on his desk, just in case calipers go the way of the slide rule and micrometer. Figures he owes it to his future grandkids to introduce them to these cool tools.

Manufacturer: ASIBT Brand: ASIBT

Package Include: 4PCS Vernier Caliper. Measure range : 0-150mm Function: Measuring outer diameter, inner diameter and depth This is kind of plastic mini vernier caliper, which is 6 inch and can used for 0-150mm measuring occassion, quiet handy and comfortable to use it.

Manufacturer: Elite Medical Instruments Brand: Elite Medical Instruments

The Elite Medical Instruments Deluxe EKG Calipers is an accurate electrocardiogram wave tracing instrument. Made with hardened steel and includes plastic protective cover for easy reference. Comes with reusable pvc pouch carrying case. Includes EKG ruler with student guide to trace EKG electrocardiogram waves. EKG ruler with seconds scale for PR, QRS, cycle, length, coupling, escape, and parasystolic intervals.

Manufacturer: Wiysond Brand: Wiysond

Features: Stainless Steel 4 Way Measuring Tool for Internal, External, Depth & Step measurements Locking Screw feature for batch measuring go/no go quality process Thumb screw for rolling the carriage to enable more precision measurements / Settings Case Hinges/clips may have surface rust The instrument is perfectly new. Made and originally designed for Tool Makers but useful in any small engineering operation Ideal for use in electronics, Jeweler, Crafts etc Characteristic Size: 23 x 7.5 x 1.5 cm Measuring range: 0-150 mm/ 0-6 inch. Resolution: 0.02mm/ 0.00079 in. Repeatability: 0.1mm/ 0.039 in. 6" (150mm) Capacity Traditional Venire Caliper Gauge Package (airbubble envelop) 1 x caliper 1 x plastic box

Manufacturer: uxcell Brand: uxcell

Description: External and inner diameter can be measure by this slide caliper. With a red green plastic case with soft inner to protect the caliper. Very useful in measuring cemstones, beads, jewelry making, also can be used in many other trades Plus a locking pin to secure readings and knurled thumbwheel on the Vernier Caliper permits fast, easy measuring. Come with plastic case with sponge protect the caliper well.

Manufacturer: ABS Import Tools, Inc. Brand: HHIP Model: 4100-0002

HHIP 6 inch locking screw vernier caliper feature satin chrome finish: non-glare. Measuring faces are ground. Supplied with case.

Manufacturer: CLARKE POWER PRODUCTS Brand: Clarke Power

6 DIAL VERNIER CALIPERPrecision engineered from high grade hardened stainless steel. Quality designed components deliver smooth operation. Shock proof dial for accurate measurements every time. Dial zero point can be manually set for specific applications. Micro thumbwheel is ideal for fine adjustments. Locking knob allows for batch measurements quickly and easily. Accurate to +/- .001 inch.

Manufacturer: JahyShow Brand: JahyShow

Description: This Digital Caliper offers instant and accurate readings of inside, outside, step, and depth measurements with accuracy of 0.001". SAE/Metric conversion switch automatically converts measurements to inches or millimeters with the simple press of a button. Adjustable thumbscrew provides tension for optimal movement of the slide and locks the jaws of the caliper in place. Includes a hard plastic storage case. Features: SAE/Metric conversion switch Zero calibration switch Automatic On/Off Easy-to-read LCD display Durable stainless steel construction Specifications: Range: 0.01mm to 150mm /0.001" to 6" Accuracy: 0.02mm / 0.001" Resolution: 0.01mm / 0.0005" Measurement in both SAE (inch) or Metric (mm) with conversion Zero setting in any position Large LCD Display Measurement types: internal dimension, external dimension, depth and steps Made of high quality hardened stainless steel With a small locking thumb screw which locks the jaws in place Automatic turn-off function Package Includes 1x Digital Calipers 1x Hard Carrying Case 1x Instruction Manual 2x Long life batteries 1x screwdriver