Dial Calipers - Page 21

Manufacturer: Flexbar Brand: Flexbar

Precision Dual Reading Dial Calipers features inch and Metric Reading With Dial Ranges: 0-6" and 0-150mm,001"/.02mm Grad. 0-12" and 0-300mm,001"/.02mm Grad. Features a thumbroll for rapid Setting and easy adjustment. Smooth, Precise feel and accuracy. Stainless Steel - Hardened and Precision Ground Throughout. Special Features: Dial hand completes one revolution per each .100"; Large Dial means Wider-Spaced, easy- to-read Graduations. inverted covered rack helps prevent excess dirt accumulation in rack gear teeth to ensure Long Caliper life. Exclusive Dual Pinion Drive mechanism reduces wear on rack and Pinion. Adjustable Dial reads directly to .001"/0.02mm. Features Outside, inside and Depth Measurements. Beam is Graduated in .10" increments for easy Reference Points. Self-contained movement eliminates gear misalignment. Hardened stainless steel throughout With Measuring Faces Precision-ground and Micro-lapped for exceptional accuracy. Knurled lock assures Precise Settings. Accuracy = .001"/0.02mm. inch/Metric Reading Dial With independently moving hands reads inch and Metric simultaneously. Complete With fitted Case. Model No. 15789, 12" and 300mm Dual Dial Caliper

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-224-005-0

Fowler 52-224-005 inch digit micrometer has a choice of measuring range and a flat anvil/spindle pair with a 0.256" diameter measuring face for general purpose measuring. The digit display has 0.001" graduation intervals and the secondary vernier scale has 0.0001" graduation intervals and an overall accuracy of 0.00024" for precise readings. Microfine graduations on satin chrome finish provide clear reading, and the positive locking nut on the spindle locks measurements in place for accurate readings. A zero adjustment on the sleeve ensures accurate measurements. The anvil/spindle pair have hardened, precision-ground, and micro-lapped measuring faces with 0.00003" flatness and 0.00016" parallelism on 4 to 5" micrometers to provide accurate measurements. The spindle thread is hardened, ground, and lapped to provide smooth movement, accuracy, and long life. The ratchet-stop thimble provides an audible sound and stops turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators. The grey baked-enamel frame provides durability and is heat-insulated to reduce temperature-related expansion or contraction providing accurate measurements. The micrometer includes a wrench and fitted case. Micrometers 2" and above include a standard. This product has a 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims. Specifications Display type Digit with Vernier scale Anvil/spindle style Flat Measuring range Varies Digit graduation interval 0.001" Vernier graduation interval 0.0001" Accuracy 0.00024" Thimble style Ratchet stop Anvil/spindle diameter 0.256" Flatness 0.00003" Parallelism 0.00016" Micrometers are precision measuring instruments that use a calibrated screw to measure distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a d...

Manufacturer: SRA Measurement Brand: Machine DRO Model: ME-CAL-GEAR-25

External data output interface via data cable - Please note data cable is not supplied. Key Specifications: Height Adjustment - 1 to 30mm. Width Adjustment - 0 to 45mm Resolution - 0.01mm (0.0005"). LCD Display - 7mm character height Battery - 1.55V SR44

Manufacturer: Fred V. Fowler Company, Inc. Brand: Fowler Model: 52-224-004-0

Fowler 52-224-004 inch digit micrometer has a choice of measuring range and a flat anvil/spindle pair with a 0.256" diameter measuring face for general purpose measuring. The digit display has 0.001" graduation intervals and the secondary vernier scale has 0.0001" graduation intervals and an overall accuracy of 0.0002" for precise readings. Microfine graduations on satin chrome finish provide clear reading, and the positive locking nut on the spindle locks measurements in place for accurate readings. A zero adjustment on the sleeve ensures accurate measurements. The anvil/spindle pair have hardened, precision-ground, and micro-lapped measuring faces with 0.00003" flatness and 0.00012" parallelism on 3 to 4" micrometers to provide accurate measurements. The spindle thread is hardened, ground, and lapped to provide smooth movement, accuracy, and long life. The ratchet-stop thimble provides an audible sound and stops turning when the spindle comes into contact with the workpiece, providing constant force for consistent measurements between operators. The grey baked-enamel frame provides durability and is heat-insulated to reduce temperature-related expansion or contraction providing accurate measurements. The micrometer includes a wrench and fitted case. Micrometers 2" and above include a standard. This product has a 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims. Specifications Display type Digit with Vernier scale Anvil/spindle style Flat Measuring range Varies Digit graduation interval 0.001" Vernier graduation interval 0.0001" Accuracy 0.0002" Thimble style Ratchet stop Anvil/spindle diameter 0.256" Flatness 0.00003" Parallelism 0.00012" Micrometers are precision measuring instruments that use a calibrated screw to measure distances. These measurements are translated into large rotations of the screw that are then able to be read from a scale or a dia...

Manufacturer: Moore and Wright Brand: Moore & Wright Model: MW100-30BI

Measuring surface is micro-lapped. Standard DIN 862. Packed in plastic box. Capacity - 300mm/ 12inch Resolution - 0.02mm/0.001inch Jaw length - 40mm. Moore and Wright HistoryFounded in 1906 by innovative young engineer Frank Moore, Moore and Wright has been designing, manufacturing and supplying precision measuring equipment to global industry for over 100 years. With roots fixed firmly in Sheffield, England, the company began by manufacturing a range of calipers, screwdrivers, punches and other engineer's tools.

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 505-675 Color: White

The Mitutoyo 505 series dial caliper uses a combination of a vernier scale and a dial whose pointer travels one rotation for each 0.1” measured to perform precise outside diameter (OD), inside diameter (ID), depth, and step measurements. The dial caliper has a fixed (main) scale and a movable dial, unlike the vernier caliper which has a second, movable vernier scale. The dial is circular and has a pointer; it is mounted on a toothed gear track which drives the pointer. As the dial moves over the main scale rule, the pointer rotates once to give the additional fractional reading. The second measurement is added to the main scale reading to obtain a final result accurate to the smallest graduation marked on the dial. The main scale and dial are marked in inches. The dial can be rotated beneath the pointer to measure size differential between two objects. The dial caliper is easier to read than the vernier caliper, thus safeguarding against user reading errors. Its standard of precise measurement complements the use of the vernier caliper; the dial provides an ease in reading and interpolating measurements which most vernier calipers, due to their need for direct observation of both scales, may not provide. The dial uses a rack-and-pinion mechanism and is mounted on a gear track where each tooth equals one quarter of the dial revolution, and four teeth equal 0.1”. The smooth-moving dial is graduated to 0.001” and offers gear train shock protection. A thumbwheel permits fast operation with one hand. A clamping screw controls scale movement and a dial calibration lock holds the sliding jaw’s position. The caliper is made of hardened stainless steel construction with titanium nitride (TiN) coating on the beam wear surface helps extend caliper life. Two sets of jaws provide four-way measurement capability: outside dimension (OD), inside dimension (ID), depth, and step, where the butt end of the fixed jaw measures one end of a work piece before its upper/lower or inner/outer steps are measure...

Manufacturer: Mitutoyo Brand: Mitutoyo Model: 505-742-53 Color: Green

The Mitutoyo 505 series dial caliper uses a combination of a vernier scale and a dial whose pointer travels one rotation for each 0.1” measured to perform precise outside diameter (OD), inside diameter (ID), depth, and step measurements. The dial caliper has a fixed (main) scale and a movable dial, unlike the vernier caliper which has a second, movable vernier scale. The dial is circular and has a pointer; it is mounted on a toothed gear track which drives the pointer. As the dial moves over the main scale rule, the pointer rotates once to give the additional fractional reading. The second measurement is added to the main scale reading to obtain a final result accurate to the smallest graduation marked on the dial. The main scale and dial are marked in inches. The dial can be rotated beneath the pointer to measure size differential between two objects. The dial caliper is easier to read than the vernier caliper, thus safeguarding against user reading errors. Its standard of precise measurement complements the use of the vernier caliper; the dial provides an ease in reading and interpolating measurements which most vernier calipers, due to their need for direct observation of both scales, may not provide. The dial uses a rack-and-pinion mechanism and is mounted on a gear track where each tooth equals one quarter of the dial revolution, and four teeth equal 0.1”. The smooth-moving dial is graduated to 0.001” and offers gear train shock protection. A thumbwheel permits fast operation with one hand. A clamping screw controls scale movement and a dial calibration lock holds the sliding jaw’s position. The caliper is made of hardened stainless steel construction with titanium nitride (TiN) coating on the beam wear surface helps extend caliper life. Two sets of jaws provide four-way measurement capability: outside dimension (OD), inside dimension (ID), depth, and step, where the butt end of the fixed jaw measures one end of a work piece before its upper/lower or inner/outer steps are measured....

Manufacturer: china Brand: Unknown

Specification : Material : metal Measure range : 0-10mm Accurancy : 0.01mm Reading : 0-90-0 Size : 5.7cm x 2.4cm x 11cm Package Includes : 3 x 0.01mm Dial Gauge

Manufacturer: Taylor Toolworks Brand: Taylor Toolworks Model: MDC-6

Features: 1) Resolution: 0.02 mm 2) Repeatability: 0.02 mm 3) Accuracy: +/- 0.02 mm per 150 mm 4) Hardened stainless steel construction with high quality finish 5) Comes in plastic storage case

Brand: FindingKing

Inches Sliding Dial Caliper for Jewelers, Machinists, Electronics, Auto Mechanics & Measuring This is a new sliding dial caliper It has finely honed jaws for exacting inside, outside and depth measurements Has a large 1 1/2" (38 mm) diameter dial that makes it easy to read graduations Has a thumb screw adjustment for easy calibration and a thumb roller with lock for ease of use This is economical and lightweight Measures in inches only Graduated in 1/10" increments It measures up to 6" The caliper measures approximately 9 5/16" x 3" (236.5 x 76 mm)