ETCR017AD Clamp Leakage Current Sensor Measuring AC/DC Current Leakage Tester

ETCR017AD AC/DC Clamp Leakage Current sensor is widely applied in those fields as electricity, communications, meteorology, railroad, car industry, oilfield, construction, measurement, scientific & research teaching institutes, industrial and mining establishments.

Technical Specifications
Function: Measurement of AC/DC current, leakage current
Power Supply: Zn-Mn dry battery, 6RL61, 9V. Continually using for 100 hours, connecting external power supply is also available for long time using.
Test Mode: Clip-on CT, non-contact measurement
Clamp Size: 16X18mm
Input Range: 0mA-60.0A AC/DC
Output Voltage: 10mV/A;100mV/A(corresponding)
Output Range: 1V peak max
Resolution: 1mA AC/DC
Accuracy: ±3%FS(23℃±5℃，below 75%rh)
Frequency: AC: 45Hz-400Hz DC: DC-100kHz
Test Position: Tested wire in the jaw center
Calibration:Adjust ZERO to calibrate, eliminate external electric field interference
Line Voltage: Lower than 600V
Working Current: 5mA
Working Temperature and Humidity: -10℃-50℃,below 80%rh
Limit Temperature Error: -10℃-0℃ and 40℃-50℃, within 2%rdg
Storage Temperature and Humidity: -10℃-60℃,below 70%rh
Insulating Strength: AC 3700V/rms(between the alloy of the clamp and the housing)
Output line:Inner core - signal output positive; shield - signal output (optional plug BNC etc)
Applicable safety rules:IEC1010-1, IEC1010-2-032, Pollution level 2, CAT â…¢(600V)