Current Clamps - Page 13

Manufacturer: RITTAL Brand: Rittal Model: SV 3450.500 - PACK OF 15 -

Rittal Sv 3450.500 - Pack Of 15 -Conductor Connection Clamp Awg 18-12

Manufacturer: Martel Brand: Martel

Martel V600 Voltimeter Broken leg, missing some nuts, minor corrosion on pegs.

Manufacturer: STAR Brand: Star Model: 26-2071

Thermostat Bulb Clamp Star Fryers Specifications Ship Weight: 0.13 lbs

Manufacturer: MFJ Brand: MFJ Model: MFJ-918

1:1 Current Balun The 1:1 Current Balun was designed to replace the center insulator of a dipole antenna. It is made up of 50 Ferrite Core Beads placed onto a 13-inch piece of RG-303 Coax. Operates 1.8 to 30 MHz. The coax and SO-239 connectors have Teflon(R) for maximum insulation and extended life of the product. The MFJ 1:1 Current Balun is enclosed in schedule 40 PVC pipe for maximum strength and protection. Unlike other baluns, the MFJ-918 makes a direct electrical connection to the antenna with #14 copper wire. The MFJ Current Balun will reduce or eliminate stray RF often found on coax. This stray RF can cause burns and other problems with electronic equipment in ham-shacks and vehicles. Stray RF also results in a loss of radiated power from the antenna, which will lead to a great reduction in signal strength.

Manufacturer: WMU Brand: WMU Model: 753510

Csm1 Current Sensor. Xantech Cbcsm1 Csm1 Current Sensor Connecting Block. Specs: Allows The Xancsm1 Current-Sensing Module To Be Used As A General Purpose Current Sensor To Sense The Power State Of A Component; Requires Xancsm1 & Xan781Rg Power Supply. WaA full credit for product is guaranteed only or, if available, replacement for all defective items. You may return a defective product up to 14 days after you receive it. NO REFUNDS WILL BE AUTHORIZED AFTER 14 DAYS. Closeout Corner area products purchased are final sale and can not be returned. Due to safety reasons, food shall not / will not be returned for any reason. All food sales are final

Manufacturer: RITTAL Brand: Rittal Model: SV 3456.500 *PACK OF 15*

Rittal Sv 3456.500 *Pack Of 15* Conductor Connection Clamp, E-Cu, 10Mm

Manufacturer: Tweco Brand: Tweco Model: 99222018

Tweco Roto-Work 118 Work Clamp Adapter

Manufacturer: Vetus Brand: ETCR

ETCR017AD AC/DC Clamp Leakage Current sensor is widely applied in those fields as electricity, communications, meteorology, railroad, car industry, oilfield, construction, measurement, scientific & research teaching institutes, industrial and mining establishments. Technical Specifications Function: Measurement of AC/DC current, leakage current Power Supply: Zn-Mn dry battery, 6RL61, 9V. Continually using for 100 hours, connecting external power supply is also available for long time using. Test Mode: Clip-on CT, non-contact measurement Clamp Size: 16X18mm Input Range: 0mA-60.0A AC/DC Output Voltage: 10mV/A;100mV/A(corresponding) Output Range: 1V peak max Resolution: 1mA AC/DC Accuracy: ±3%FS(23℃±5℃，below 75%rh) Frequency: AC: 45Hz-400Hz DC: DC-100kHz Test Position: Tested wire in the jaw center Calibration:Adjust ZERO to calibrate, eliminate external electric field interference Line Voltage: Lower than 600V Working Current: 5mA Working Temperature and Humidity: -10℃-50℃,below 80%rh Limit Temperature Error: -10℃-0℃ and 40℃-50℃, within 2%rdg Storage Temperature and Humidity: -10℃-60℃,below 70%rh Insulating Strength: AC 3700V/rms(between the alloy of the clamp and the housing) Output line:Inner core - signal output positive; shield - signal output (optional plug BNC etc) Applicable safety rules:IEC1010-1, IEC1010-2-032, Pollution level 2, CAT Ⅲ(600V)

Manufacturer: Promax Brand: Promax Model: CT-195

CT098, CT193, CT195 and CT237 clamp meters are essential instruments for low voltage installers. The CT Series models offer the accuracy and reliability of a professional instrument with a safe, robust and ergonomic design.

Manufacturer: Megger Brand: Megger Model: PVK330

Megger PVK330 Photovoltaic Kit with D.C Clamp Multimeter Photovoltaic Kit with D.C Clamp Multimeter When installing, commissioning and testing a photovoltaic installation additional instrumentation is required to accompany the usual electrician's test equipment such as the Megger MFT1730 and MFT1835 multifunction testers. The Megger PVK330 photovoltaic kit offers this additional instrumentation in the form of a PVM210 irradiance meter, DCM340 600 A ac / dc clampmeter and a kit of specialist solar testleads. To provide easy storage of the PV kit a zipped pouch is also included. The PVK330 kit offers the solar / photovoltaic engineer a clampmeter option of verifying, with the PVM210 irradiance meter, the stated short circuit current as provided by the manufacturer of the solar panel as required by published standards. In addition, this clampmeter offers the option of testing the current within each 'string' on a larger solar array without disconnection of cables. PVM210 Irradiance Meter The PVM210 is a pocket size instrument that has both solar detector and meter combined in one unit that permits single handed use, ideal for working at height and on sloping roofs. The unit has a 3¾ digit display and a maximum range of 1999 W/m². A hold function allows easy measurements of solar power. DCM340 Clamp Meter The DCM340 Clamp Meter features 600 V ac / dc and 600 A ac / dc ranges. Additional functions include resistance and frequency. A hold feature to enable easy measurements is also included. The additional functions would also prove to be of use in other sections of the photovoltaic installation. Silicon test leads with probes and a protective storage pouch are provided with each clamp. Specialist PV Test Leads In addition to the silicon multimeter test leads supplied with the DCM340 two pairs of specialist solar test leads are included in the PVK330. The first pair of leads comprise of 1