Network & Cable Testers - Page 15

Manufacturer: Black Box Brand: Black Box Model: FT815A-R2

Get superior quality and room to add your personal favorites.. What's included: * 4.5" needle-nose pliers * Electrician's scissors * (2) hexdrivers: 3/16", 1/4" * (2) Phillips screwdrivers: #0, #1 * 1/8" x 3-slot screwdriver * 3/16" x 4-slot screwdriver * Adjustable wire stripper * AA-battery penlight * Electrical tape * Carrying pouch

Manufacturer: Byte Brothers Brand: Byte Brothers

Lighted tone probe for use with the Low Voltage Pro Models 1, 2 and 3 . Used for cable tracing.

Manufacturer: Precision Rated Optics Brand: Precision Rated Optics Model: PRO-FLC-9102M

PRO-FLC-9102M 10/100M fiber network card mm 2Km Precision Rated Optics PRO-FLC-9102M fiber LAN card supports fiber networks at speeds of up to 100Mbps. This transmission media (fiber optic) is reliable for long distance transmissions and immune to electrical and magnetic interference. Features: High band width 1000Mbps network speed Supports full duplex mode Supports IEEE 802.3x full duplex flow control Supports 32 / 64 bits PCI bus Compliant with PCI 2.2 interface Supports Jumbo frame up to 9014 bytes Supports high level VLAN filtering function Supports on-board verification of IP headers and TCP / UDP check sums for received data Supports on-board screening of VLAN tagged ethernet frames Distance: Single mode simplex single wave length SC/APC connector Wave long :1310nm15/40/60KM Single mode simplex double wave length SC/PC connector Wave long TX 1310nm /RX 1550nm 15/40/60KM Single mode double cable SC/PC connector Wave long 1310nm15/40/60KM Multi mode double cable SC/PC connector Wave long 1310nm2KM Order information: PRO-FLC-9200M -10/100/1000M fiber network card Multi mode 0.5Km PRO-FLC-9210S - 10/100/1000M fiber network card Single mode 10Km

Manufacturer: Fluke Networks Brand: Fluke Networks Model: NF395

Bulkhead APC/SC Video Probe Adapter Tip

Manufacturer: Fluke Networks Brand: Fluke Networks Model: NFA-FC

2-Piece FC Interchangeable Adapter Set for the Power Meter Port on CertiFiber Pro, SimpliFiber Pro or DTX-xFM2

Manufacturer: Tellid Communication Technology CO., LTD Brand: Tellid Model: TLD6070-R-FC-LC-TLD7002A-FC-LC

The Optical Power Meter TLD6070 and Optical Laser Source TLD7002A are supplied by the original manufacturer Tellid, the unique shell. All the same shell from our factory at all. We supply CE certification, one year warranty. 1.Optical Power Meter TLD6070 *Specification *Power Measurement range(dBm): -70 to +6dB *Wavelength Range(nm): 850,1300,1310,1490,1550,1625 *Common interface design: FC/SC/ST interface, with standard FC, SC adapter interface *Detector: Fitered InGaAs *Resolution Ratio: 0.01dBm *Power Supply: 2 AA1.5V Batteries or (Chargable battery) *Dimensions: 16.5*8.0*3.5cm *Weight(g):280g 2.Optical Laser Source TLD7002A Technical Specifications *Emitter Type:F-P LD *Wavelength(nm):850/1300nm *Output Power: -7~ -9 dBm *Output Stability: ¡À0.10dB/1h *Mode of Light Output: CW & MOD *Modulation: CW,270Hz,1KHz,2KHz *Optical Interface: FC adapter(SC,ST Optional) *Automatic shutdown time:10min *Battery:2 AA1.5V Batteries or (Chargable battery) *Dimensions:16.5*8.0*3.5cm *Weight:280g

Manufacturer: Generic Brand: Generic

Specification: Item Type: Network Tester Brand Name: OEM Model Number: NS-468 Testing Cable Type: RJ11, RJ45 Power Supply: DC9V Battery Power Consumption: 25mA Product Net Weight: 150g Product Size: 10.5 x 10.5 x 2.6mm

Manufacturer: Flexzion Brand: Flexzion

Not sure what's wrong with your network? Before you buy an expensive replacement router or cable modem, test your cables! If the wires are broken (and you know how those cables get snaked around the house) the tester will detect it. If you make your own patch cables and want to test that the wires are correctly assigned, then you need this! Test your twisted pair, Straight, Crossover, Cat 5 / Cat 5e / Cat 6 / UTP cables with RJ-11 or RJ-45 connectors. Insert the battery, turn on the tester, and connect one end of the cable to the Master side and the other end to the Remote side. The lights indicate problems (if any) with wires in the cables. A very useful item for the networking enthusiast!Specification:Main testerSize: 105 x 67 x 28mmWeight: 74gRemote testerSize: 105 x 38 x 28mmWeight: 47gPackage Content:1x RJ45 RJ11 CAT5 Network Lan Cable Tester

Manufacturer: Jonard Industries Brand: Jonard Tools Model: PT-300

Comes complete with LED light indicator, detachable tone detector, female push-on connector and 1.5V AAA battery. Drop cable continuity tester - accurate up to 5,000 feet. Identify cables in an MDU, and detect troublesome short circuits. Loud tone identifies line carrying signal. LED light indicates splitters, DC shorts and other self grounding devices in cable. Right angle male push-on connector for working in confined areas. Common AAA battery for operation. Just 5" long, weighs 2 oz.

Manufacturer: Sinometer Brand: Sinometer Model: MS6810

The MS6810 detects the most common wiring faults on TIA568A/568B, Token Ring, 10BASE-T,10/100 BASE-T twisted-pair cables and coaxial cables (BNC). It tests for faults such as open circuits, shorts, crossed pairs, reversed pairs and split pairs in no time. The MS6810 includes one master unit and one remote unit easily operated by one person testing patch cords or installed cables. Moreover, the small remote unit is designed to slip into the master unit to prevent loss or damage. The compact design is also very user-friendly and can be easily and conveniently carried and fit into your pocket. Split pair fault detection at a minimum 40cm cable length. Pairs tested: 1/2, 3/6, 4/5, 7/8 and shield. Verification of shield integrity. Specially designed remote unit that enables one person to test installed cables.