Network & Cable Testers - Page 7

Manufacturer: T3 Innovation Brand: T3 Innovation Model: CB400 Color: Blue/Gray

"The Cable Prowler provides full cable testing on any category network, coax, or telephone cable. It will display wire map, numbered ID remotes, and any faults, including shorts, opens, miswires, split pairs, and reverses. The full-featured Cable Prowler measures cable length (using TDR technology) and generates tone levels for signal tracing and cable identification on all pairs, a selected pair, or a selected pin. All of this is displayed in a full color graphical display for easy viewing in any environment. Cable Prowler also has the ability to name each cable and save all test results. Cable results can be exported to a computer via micro USB cable for record keeping and printing (CSV or PDF). The Cable Prowler enables quick identification of a network drops link capability and current link status. Cable Prowler also detects the presence of PoE on the network drop and what class of PoE per IEEE 802.3 af/at with load test for voltage drop. These network tests can also be saved for record keeping and printing (CSV or PDF)."

Manufacturer: XBXI Brand: Generic

Connect an HDMI-equipped Laptop, Ultrabook, or Desktop Computer to your VGA Display, or Projector with Audio The LinkS HDMI-to-VGA Adapter Cable enables you to connect an HDMI output device, such as a laptop video output or digital media extender to a VGA display device (monitor, projector) by converting the HDMI video signal from the output device into a VGA output and separate 2-channel analog audio. Ideal for low powered video cards 1.No need External USB power 2.Works with low powered HDMI video cards that do not output enough power for a stand-alone adapter Designed for travel - Lightweight and portable Small foot print makes this adapter ideal for connecting your tablet or smartphone to VGA displays while on the road or in boardrooms using VGA projectors Plug-and-Play Installation 1.no installation of any Software or drivers 2.Connect to the HDMI output on your device 3.Connect your Display to LinkS HDMI TO VGA using a VGA cable 4.Audio Support:3.5mm stereo audio output

Manufacturer: T3 Innovation Brand: T3 Innovation Model: RK220

T3 Innovation manufactures handheld testing equipment for use in the telecommunications, networking, and electrical design and maintenance industries. Established in 2009, T3 Innovation is headquartered in Camarillo, CA.

Manufacturer: GOCHANGE Brand: GOCHANGE Model: GOCHANGEEtoopery922

Description: √ Easy to check fiber faults with visual fault locator, Portable and rugged,Dust-proof design keep fiber connectors clean. √ Test for both single-mode and multi-mode cables with optional 2.5mm fiber optic(Standard) connectors to 1.25mm adapter(Optional). √ 2.5mm Universal Connector - the connector of the detector is compatibly designed for ST, SC, FC interferes both in circle and square shape of different fiber optic cables. √ Practical Design and Excellent Function - Small size and lightweight, it is portable and easy for field test with multiple functions such as constant output power, lower battery warning, long battery life and long distance detection. √ Easy and Accurate Identification - It can easily and accurately detect and locate fiber breaks, poor connections, bending or cracking. The detector will emit a 650nm bright light for fiber tracing, breaks or faults in the fiber will refract the light, creating a bright glow around the faulty area. Specification: Laser output: 30 mW Laser wavelength: 650 nm Fiber Applications: singlemode / multimode Connectors: 1.25 mm connector FC (or) 2.5 mm universal connector Features: continuous wave and pulsed mode, constant output power Power: 2 AAA Batteries (Not Include) Shell material: Aluminum Dimensions: 175 mm long x 26 mm diameter Package includes: 1 x Visual Fault Locator 1 x Carrying Pouch 1 x Lanyard Note: This pen cannot be shot on the eyes directly.

Manufacturer: Tellid Communication Technology CO., LTD Brand: Tellid Model: TLD6070B-G

The Fiber Optical Power Meter TLD6070B is supplied by the original manufacturer Tellid, the unique shell. All the same shell from our factory at all. We supply CE certification, one year warranty. 1.Optical Power Meter TLD6070B *Specification *Power Measurement range(dBm): -50 to +26dB *Wavelength Range(nm): 850,1300,1310,1490,1550,1625 *Common interface design: FC/SC/ST interface, with standard FC, SC adapter interface *Detector: Fitered InGaAs *Resolution Ratio: 0.01dBm *Power Supply: 2 AA1.5V Batteries or (Chargable battery) *Dimensions: 16.5*8.0*3.5cm *Weight(g):280g Color:Green

Manufacturer: anputaike Brand: Cruiser Model: NF-8108-M

Features Do cable continuity check in a nice and easy way Check wiring error in 5E, 6E, coaxial cable and telephone line Applicable for open circuit, short circuit, jumper wire, reverse connection or cross-talk interference Find the location of wiring or connection error Measure cable length and determine the distance of open circuit and short circuit Dynamically calibrate cable length and make length measurement as accurate as 97% Long battery life (standby mode for over 50 hours) Auto time delay shut off Measure length and pair with or without far-end recognizer Far end recognizer with prompt voice Self checking function and auto compensate any change in battery capacity or ambient temperature Specification: LCD: 4 x 16 characters big screen (valid visual field 61.6 x 25.2mm) Type of Tester Cable: STP / UTP twin twisted cable coaxial cable telephone line Tester Port: Tester RJ45 master port (M), tester LOOPBACK RJ45 port (L), far-end recognizer RJ45 port (R). (BNC and RJ11 converters (not included in the set), can be used to measure and check the continuity of coaxial cable and telephone line.) Length Measurement of Twin Twisted Cable: Scope: 1350m (31,200ft) Calibration accuracy: 3% (±0.5m or ±1.5ft) (calibrating cable > 5 M) Shipment accuracy: 5% (±0.5m or ±1.5ft) (AMP, AT&T Class 5 cable) Display: M or FT Length Calibration: User can set calibration factor by himself by a given length cable. The length of calibrating cable is more than 5M. Wire Sequence and Locating Cable Error: Check errors such as: open circuit short circuit reverse connection cross over or cross-talk interference

Manufacturer: EIVOTOR Brand: EIVOTOR Model: EIVOTORpJWqqj5ol

Introduction: For network communications test equipment, on-line, Hunt, and so on, can be widely used in telecommunications, broadband networks, infrastructure, and other lines. Second, the product transmitter description Top of the product: RJ45 / RJ11 connector Panel functions: function indicator, power switch button, hunt function switch, line switch and line speed selection, and switching frequency. The built-in battery used for the transmitter is 3 AA (No. 5) dry battery voltage: 1.5V The transmitter is about 4.72inch/120mm wide and about 2.48inch/63mm wide The weight of the transmitter is about 136g Detector Description: Components and buttons: Hunt signal sensor head, flashlight, volume control dial, flashlight switch, Hunt switch and the line lights display area, RJ45 line socket. The detector battery is a 9V battery The detector is about 7.28inch/185mm wide and about 1.37inch/35mm wide The weight of the detector is about 102g Signal transmission test distance of about 1KM Package Include: 1x Transmitter 1x Receiver 1x Cable 1x Manual

Manufacturer: BLACKBOX NETWORK SERVICE Brand: Black Box Model: TS300A Color: black

Ideal for IT managers and technicians responsible for cabling and network hardware, the CAT5/5e/6 LAN Performance Verifier enables you to quickly spot slow cables, bad connectors, incorrect wiring, improper lengths, and low signal levels from hubs, switches, PCs, and other LAN hardware. You can also decode your network devices' capabilities and signal levels, and even place the tester in-line between any two devices to determine the negotiated speed. Or perform single-side tests without powering down devices or unplugging cables.

Manufacturer: Noyafa Brand: NOYAFA

Item Specifics: Is_customized : Yes Brand Name : Noyafa Model Number : NF-901 Place of Origin : Shenzhen.China Interface: FC ( ST/SC interchangeable) Wavelength: 1310/1550nm Power : 1.5V x 3pcs (not include) Warranty : 1 Year

Manufacturer: Fluke Networks Brand: Fluke Networks Model: FI1000-2.5APC-UTIP

Fluke Networks FI1000-2.5APC-UTIP is a 2.5 mm APC universal video patch cord probe tip for the FI-1000 Fiber Inspection Video Probe