Clamp Meters - Page 25

Manufacturer: Amprobe Brand: Amprobe Model: ACD-22SW

The Amprobe ACD-22SW digital clamp meter with swivel clamp and non-contact voltage detector is a true RMS (root mean square) sensing, auto- or manual-ranging multimeter for measuring current, voltage, and resistance in electrical testing and heating, ventilation, and air conditioning (HVAC) applications. It has a transformer clamp that measures alternating current (AC) to 400 amp. The meter comes with detachable test leads that measure direct current (DC) voltage and AC voltage to 600 volts (V) and resistance to 40 megaohms. The clamp has two jaws that can close around a conductor up to 1.18" (30 mm) in diameter to measure current or frequency without touching or interrupting the circuit. It swivels 180 degrees to allow the liquid crystal display (LCD) to be seen when taking readings in hard-to-reach areas. The meter's non-contact voltage detector senses AC voltage without making contact with the circuit. An audible continuity sensor confirms that the circuit conducts electricity, and a diode test detects whether a circuit’s diodes are working properly. The hold function keeps the reading on the display, even after the meter is disconnected. The meter's backlit liquid crystal display (LCD) is visible in low light. The unit automatically turns off after 10 minutes of non-use to conserve battery life, and a low-battery indicator signals when the meter's batteries need to be replaced. A finger guard on the body of the meter helps protect fingers from shock.This true RMS (root mean square) sensing meter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the current or voltage has a sinusoidal waveform, or non-linear loads, such as electronic devices or motors, where the current or voltage has a sinusoidal non-sinusoidal waveform. Two ranging modes (auto or manual) offer a range of operator control when taking readings. When turned on, the meter will be in auto-ranging mode and will automatically select the correct operating range for the pro...

Manufacturer: Amprobe Brand: Amprobe Model: ACD-21SW Color: Multicolored

The Amprobe ACD-21SW digital clamp meter with swivel clamp, non-contact voltage detector, and included temperature probe is an average-sensing, auto- or manual-ranging multimeter for measuring current, voltage, capacitance, resistance, and temperature in electrical testing and heating, ventilation, and air conditioning (HVAC) applications. It has a transformer clamp that measures alternating current (AC) to 400 amp. The meter comes with detachable test leads that measure direct current (DC) voltage and AC voltage to 600 volts (V), capacitance to 4 millifarads, and resistance to 40 megaohms. The clamp has two jaws that can close around a conductor up to 1.18" (30 mm) in diameter to measure current or frequency without touching or interrupting the circuit. It swivels 180 degrees to allow the liquid crystal display (LCD) to be seen when taking readings in hard-to-reach areas. The meter's non-contact voltage detector senses AC voltage without making contact with the circuit. The meter comes with a K-type thermocouple probe for measuring temperature. The hold function keeps the reading on the display, even after the meter is disconnected. The unit automatically turns off after 10 minutes of non-use to conserve battery life, and a low-battery indicator signals when the meter's batteries need to be replaced. A finger guard on the body of the meter helps protect fingers from shock.This average sensing, or average responding, meter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the current or voltage has a sinusoidal waveform. Two ranging modes (auto or manual) offer a range of operator control when taking readings. When turned on, the meter will be in auto-ranging mode and will automatically select the correct operating range for the property being measured. It can be switched to manual-ranging mode, which requires that the operator choose the appropriate operating range. The meter has a 4,000-count resolution, meaning that it can display up to 3,9...

Manufacturer: Hioki Brand: Hioki Model: 3280-10

Measure the fundamental waveform component using the average rectified method. Wide range of maximum 1000A, drop proof design withstands dropping from a height of 1 meter. Clamp on Hi-Tester is 1000A, clamp aperture: 1-19/64" diameter. Light 100g, and slim 5/8". Independent-opening double-lever design. Slim body design, allows easy clamping even for narrow conductors. No metal (iron core) exposure, ensuring enhanced safety. AC Current range 42.00 to 1000A AC, 3 ranges (+/-1.5 percent rdg. +/-5 dgt. at 50 or 60Hz), Average rectifier effective value. AC Voltage range 4.200 to 600V AC, 4 ranges (+/-2.3 percent rdg. +/-8 dgt. at 50 or 60Hz), Average rectifier effective value. DC Voltage range 420.0mV to 600V DC, 5 ranges (+/-1.3 percent rdg. +/-4 dgt.). Other functions Resistance: 420.0 to 42.00 M-ohm, 6 ranges, Accuracy: +/-2.0 percent rdg. +/-4 dgt. (at 420 to 420 k-ohm range). Continuity: 420.0 ohm (Buzzer sounds at approx. 50 ohm or less). Analog output None. Frequency characteristics (at AC current / voltage) AC current: 50/60 Hz, AC voltage: 50 to 500 Hz. Display section Digital / LCD, maximum 4199 dgt. Sampling rate 2.5 times/sec or 1 times/3 sec. Maximum circuit voltage 600V AC rms (insulated wire). Power supply: Coin type lithium battery (CR2032) x 1, Continuous use 150 hours. Core jaw diameter 33 mm. Accessories test lead 9208 (1). Carrying Case 9398 (1). 3 Years warranty. Measures 2-15/64" width by 6-113/128" height by 5/8" depth.

Manufacturer: Extech Instruments Brand: Extech Model: EX730 Color: Multicolor

Functions include Capacitance and Frequency FEATURES Models with AC/DC Current, AC/DC Voltage, Resistance, Frequency, Capacitance, Temperature, Diode and Continuity 1ms Fast Peak Hold True RMS models Double molded housing for better grip and one-handed operation Large LCD display with bright backlighting Data hold "freezes" data in display 1.2" (30mm) circular jaw opening for large cables (500MCM) Auto power off Complete with test leads, 9V battery and Type K bead wire probe (EH720, EH730) and carrying case Professionals can now have a full-featured digital clamp-on meter at an affordable price, with the Extech EX730 True RMS 800-Amp AC/DC Clamp Meter. The ergonomically designed, double-molded housing gives you a better grip for one-handed operation with total comfort. The EX730 will measure AC current, AC/DC voltage, frequency, resistance, capacitance, diode, and continuity. The True RMS feature means the meter can correct for distortion from electronic devices. And the included Type K bead wire probe allows temperature to be measured. The large, high-contrast, backlit LED display makes readings easy to see.EX730 800A AC Clamp MeterAt a Glance:Accurately performs basic and advanced measurements, including both AC/DC currentTrue RMS capability corrects for distortion from electronic devicesErgonomically designed housing for comfortable one-handed operationLarge backlit high contrast LED display makes reading easyOne-year limited warranty on parts and laborErgonomic design provides one-hand operation and comfort. View larger.Multipurpose Meter in One Affordable PackageThe Extech EX730 offers multiple meter functions in one device, allowing service technicians to carry only one meter into the field instead of several. The EX730 will measure both AC and DC current up to 800 amps with a maximum resolution of 0.01 amps. It also measures AC/DC voltage, frequency, resistance, capacitance, diode, and continuity. The wide-opening, 1-1/2-inch circular jaw fits around cables up to 500 MCM. The Extech also features DC Zero a...

Manufacturer: Fluke Corporation Brand: Fluke Model: VPS40-III

10:1 Voltage probe with safety-designed shrouded 4mm test pin, for use with 120 Series ScopeMeter. Hook clip (Red) and ground lead included. The shrouded 4mm banana test pin makes this probe also compatible with standard safety-designed alligator clips. Set contains 600V CAT III / 1000V CAT II rated items: 10:1 voltage probe (1 black), hook clip (1 red) (HC120-III), ground lead with mini alligator (1 black). Attenuation 10x. Bandwidth DC to 40 MHz (-3 dB). Maximum input voltage 600V CAT III / 1000V CAT II as per IEC61010-031:2008. Input resistance/capacitance, 5 mega ohm / 15.5 pF. Compensation fixed for ScopeMeter 120 series (14 pF). Safety-shrouded 4 mm banana pin with test probe tip. Instrument connector 4mm shielded banana plug. Cable length 1.2m. Safety IEC / EN 61010-031:2008; UL61010 B-2-031; CSA C22.2 No. 1010.2.031. Pollution Degree 2. Protection Class II (double insulation). Black color. UL Listed.

Manufacturer: B&K Precision Corporation Brand: BK Precision Model: 316

The B&K Precison 316 mini digital clamp meter is an average-sensing, auto-ranging multimeter for measuring current, voltage, and resistance in electrical testing applications. It has a clamp that measures AC and DC current to 100 amp. The clamp has two jaws that can close around an electrical conductor up to 12.5mm in diameter to measure current without touching or interrupting the circuit. A set of test leads is included for measuring AC and DC voltage to 600V and resistance to 10 kilohms. The peak hold function records the maximum measurement of a current surge. To aid documentation of readings and capture readings in tight spaces, the data hold function keeps the most recent reading on the display after disconnecting from the circuit. Its zero function allows a measurement to be set as a reference value for subsequent measurements. An audible continuity sensor confirms that the circuit conducts electricity. The meter has a rotary switch to select the property to measure, and a four-digit LCD that shows readings. It can output an analog signal for reading measurements on a secondary device, such as an oscilloscope. The unit operates on two AA batteries, and turns off automatically after 30 minutes of non-use to conserve battery life. It has a low-battery indicator that signals when the battery needs to be replaced. Clamp meters are typically used by electrical engineers to measure properties of electrical current without physically touching or disconnecting the conductor.This average-sensing, or average-responding, meter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the current or voltage has a sinusoidal waveform. It is auto-ranging, so it automatically selects the appropriate operating range for the property being measured. Accuracy and resolution specifications vary according to the range being measured. It meets International Electrotechnical Commission (IEC) safety standard 61010 and is rated for CAT II installations to 600V, which ...

Manufacturer: Fluke Corporation Brand: Fluke Model: 4628917

Extreme Hard Case with do-it-yourself custom foam inserts.

Manufacturer: Amprobe Brand: Amprobe Model: ACD-23SW

The Amprobe ACD-23SW clamp meter measures voltage, current, resistance, capacitance, continuity, and temperature in electrical wires and cables up to 1.18in. (30mm) in diameter. This true root mean square (RMS) meter provides accurate readings when measuring linear or non-linear loads with current or voltage that has a sinusoidal or nonsinusoidal waveform. The clamp head swivels 180 degrees so that the display can be turned for greater readability and the jaw is designed for single-handed operation. The non-contact voltage indicators detects voltage from 70 to 600V alternating current (AC), works on any range, and indicates the presence of AC voltage with a red indicator light and audible beep. The tester measures AC and direct current (DC) voltage up to 600V, AC current up to 400A, resistance up to 40 megaohms, capacitance up to 4mF, and continuity up to 400 ohms. It also measures temperature from -30 to 400 degrees F (-35 to 400 degrees C) for more accurate readings. The unit is both manual and autoranging. The 3-3/4 LCD has a maximum reading of 3,999 and has a hold function. The tester is powered by two AAA batteries and has an auto-off function that turns the unit off after 10 minutes of idle time. The ACD-23SW is designed for use by electricians and electrical contractors. Specifications Power supply AAA batteries (two, included) AC voltage range 0 to 600V DC voltage range 0 to 600V AC current range 0 to 400A Resistance range 0 to 40 megaohms Capacitance range 0 to 4mF Continuity range 0 to 400 ohms Temperature range -30 to 400 F/-35 to 400 C Weight (including batteries) 1.26lb./157g Safety standard met International Electrotechnical Commission (IEC)/European Standards (EN) 61010-01 Cat III 600V Dimensions 12 x 5.3 x 1.2 inches / 306 x 135 x 30mm (H x W x D)H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Electrical test meters report electrical circuit pro...

Manufacturer: Klein - Geneva Supply Brand: Klein Tools Model: CL2500

Designed by electricians for electricians, this professional series true RMS auto-ranging clamp meter measures AC/DC voltage, AC/DC current, resistance, capacitance, frequency, duty cycle and temperature. The built-in magnetic mount allows for hands-free convenience. The unit is CAT IV Safety rated and includes case, test leads, test lead holder and batteries.

Manufacturer: UEi Brand: UEi Test Instruments Model: DL379 Color: Black, Yellow

4000uF Capacitance, 2000 uA AC/DC, Non-Contact Voltage 24~600VAC, 750VAC/1000VDC, 400A AC, min/max, -22 to 752 degrees Fahrenheit, 40M Ohms resistance, frequency duty cycle, diode, data hold,