Clamp Meters - Page 21

Manufacturer: Fluke Brand: Fluke Model: FLK-FC_SD Card

Fluke Corporation manufactures electrical testing tools and software for industrial and commercial applications. The company, founded in 1948, is headquartered in Everett, WA.

Manufacturer: Fluke Brand: Fluke Model: Fluke 1AC-A1-II Color: Yellow/Gray

Fluke 1AC-A1-II-5Pack Specifications: Operating principle: Senses the steady state electrostatic eld produced by ac voltage through insulation without requiring contact to the bare conductor. A red glow at the tip and a beeping noise (if not switched OFF) indicates the presence of voltage. Voltage sensing ranges: Nominally, 90 V AC to 1000 V AC or 200 V AC to 1000 V AC depending on model, 45 Hz to 405 Hz; also a 20 V to 90 V control circuit model Detector tip style: Blade or round, depending on model Light source: One high intensity red LED Agency Approvals: c CSA us, CE, TUV, C-Tick Safety Rating: 1000 V, CAT IV IP Rating: IP 40 Operating Temperature: -10°C to 50°C Operating humidity ranges: 0% to 95% (0°C to 30°C); 0% to 75% (30°C to 40°C); 0% to 45% (40°C to 55°C) Operating Altitude: 3000 meters Batteries Required: (2) 'AAA' AlkalineFluke 1AC-A1-II-5Pack Includes: (5) Voltage Testers (2) 'AAA' BatteriesFluke 1AC-A1-II-5Pack Features: Voltbeat technology and continuous self-test - so you always know it's working Upon detection, tip glows and beeper sounds CAT IV 1000 V for added protection Expanded range: 90 V to 1000 V AC or 200 V to 1000 V AC depending on model 20 V to 90 V AC control circuit model also available The next generation VoltAlert AC non-contact voltage testers from Fluke are easy to use - just touch the tip to a terminal strip, outlet, or supply cord. When the tip glows red and the unit beeps, you know there's voltage present. Electricians, maintenance, service, safety personnel, and homeowners can quickly test for energized circuits in the workplace or at home.

Manufacturer: Fluke Corporation Brand: Fluke Model: FLK2AC/90-1000V5PK

FLUKE FLK2AC/90-1000V5PK 5-PK VoltAlert Voltmeter, 90V to 1000V

Manufacturer: BDW Enterprises LLC Brand: Measure Current Model: H1A-ACDC-72-MK

The H1-ACDC-70-MK includes a high quality Honeywell AC / DC current sensor. It requires 11-35 Volts DC at 20mA to operate this sensor. This sensor has a max output range of -8 Volts to + 8 Volts. You will like the adjustable sensitivity and offset capability using the 22 Turn trim potentiometers. For instance if your data logger / data acquisition hardware has an input of 0 to 5 Volts and you want to measure AC current, then you would offset the signal up to 2.5 Volts, and adjust your gain / span so that the waveform peaks out at 5 Volts. If you want to measure both AC or DC current and your datalogger / data acquisition hardware has an input range of -10 to +10 Volts, then you would adjust the offset to zero and adjust your gain such that the max current puts out 8.5 Volts which will give you the highest resolution for your hardware. APPLICATIONS- Wind turbine power monitoring - Current activated switching when connected to a solid state relay. (This sensor can turn something on like a fan or light when current is detected). - Battery charging / battery discharging - Hydro output - DC Motor current consumption (Regular DC Brushed motors, or brushless - AC current for Air conditioners AC This sensor is easily used with the Arduino platform such as the Arduino UNO which only costs you $20 through Amazon (Sold separately). The Arduino UNO has 6 Analog channels to monitor a 0 to 5V range. The Arduino UNO can be setup as an AC or DC datalogger / O-Scope for monitoring both current and Voltage (Voltage monitoring requires the use of a Voltage divider to scale the Voltage down to the input range of data logger) . If you would like the free LabVIEW software to use the Arduino for a datalogger or data acquisition O-Scope let us know and we will give you a link to download it.

Manufacturer: Fluke Corporation Brand: Fluke Model: 62 Max+ Color: Multicolored

IP54 rated for water and dust resistance. Features. Withstands a 9.8 foot drop Test. temperature range 62 Max -22 to 932 Max -22 to 1202. adjustable emissivity. Hi and low alarms. dimension - 6.8 x 3.3 x 2.9 in.

Manufacturer: Mastech Brand: Mastech Model: MS2006B

Features:Large 2000 counts LCD displayJaw size: 31mm/1.2 inchData holdLow battery indicationPackage includes:1 * MS2006B AC Leakage Clamp Meter1 * User manual

Manufacturer: Megger Brand: Megger Model: 1000-304

The Megger DCM320-EN Digital Clampmeter has both clampmeter and multimeter functions, measures AC current up to 400A, AC and DC voltage up to 600V, and resistance up to 20 Megaohms. The multimeter has clamp jaws for use in industrial and domestic electrical system installation. The unit has a 3-1/2 digit LCD with a hold function, which can be used to keep the reading on the screen when it is used in a location with limited visibility. The clamp jaw is capable of measuring the current in cables up to 27mm in diameter. AC and DC voltage and resistance are measured with the included red/black test leads. The unit also has a continuity buzzer that is on at less than 20 Ohms and off at greater than 50 Ohms. The DCM320-EN Digital Clampmeter is designed for use by electricians and contractors. The DCM320-EN is powered by two AAA batteries (with a battery life of 200 hours) and has an automatic cutoff function that turns the unit off after 10 minutes of idle time. The central range knob is suitable for ambidextrous operation. Separate voltage/resistance test leads can be disconnected when not in use. The unit is designed to withstand a 1.2m (4 foot) drop without damage and comes with a carrying case. Specifications AC operating voltage 200V to 600V DC operating voltage 0V to 600V AC operating current 0 to 400A Operating resistance 200 Ohms to 20 Megaohms Operating temperature 32 to 122 degrees F (0 to 50 degrees C) Operating humidity 32 to 86 degrees F (0 to 30 degrees C) > 80% Rh 86 to 104 degrees F (30 to 40 degrees C) > 75% Rh 104 to 122 degrees F (40 to 50 degrees C) > 45% Rh Power supply Two AAA batteries Weight 225g/0.5lb (including batteries) Safety standard met International Electrotechnical Commission (IEC)/European Standards (EN) 61010-1 Cat III 600V Electromagnetic standard met IEC/EN 61326-1 Warranty One-year, limited Dimensions 188 x 56 x 28mm/7.4 x 2.2 x 1.1 inches (H x W x D) H is height, the vertical distance fr...

Manufacturer: General Technologies Corp Brand: General Technologies Corp Model: CM600 Color: Grey with Yellow Clamp

GTC 600 Amps AC/DC current clamp meter with its auto-range and high sensitivity allows the measurement of AC/DC currents with a resolution down to 0.1 A, and up to a maximum of 600A, making it ideal for testing all kinds of loads such as found in electric motors, fuel pumps, charging systems, starter currents, alternators, etc. This features a small and narrow jaw, which can accept cables up to 1 inch (25.4mm) in diameter and be used in confined spaces, wire bundles, and small gauge wires. Other features includes resistance measurement functions, continuity test (with buzzer), and display hold and peak detector functions.

Manufacturer: Fluke Corporation Brand: Fluke Model: FLK-TI-SBP3

The Fluke TI-SBP3 lithium-ion battery pack is designed for use with Fluke Ti32, Ti29, Ti27, Ti125, Ti110, Ti105, Ti100, TiR32, TiR29, TiR27, TiR125, TiR110, TiR105, Ti400, Ti300, and Ti200 thermal imagers (sold separately). This rechargeable battery extends thermal imager usage time in the field. It can be charged with the Fluke charging base (sold separately) or with the thermal imager when plugged in to AC power. Thermal imagers, also known as thermal cameras, infrared imagers, or infrared cameras, capture images of heat patterns for examination and analysis. Objects emit infrared light, and this light radiates heat in varying temperatures. A sensor within a thermal imager detects radiant heat and transforms it into patterns on a thermal imaging system. Thermal imagers have LCD screens to display an image of the object in a range of color that corresponds with variations in temperature. Technicians can transfer images and video to a computer for process monitoring and analysis. Some thermal imagers can show visual images along with thermal images to make an object more identifiable. Thermal imagers are used in an array of industries, including construction and building maintenance, manufacturing, firefighting, medicine, law enforcement, and military among others. A wide range of applications include building diagnostics to identify hidden moisture or heat leaks, industrial and commercial maintenance to prevent or identify electrical or mechanical equipment failure, thermal cameras that restore visibility in fire control, medical and veterinary diagnostic imaging to identify health conditions, and surveillance cameras for law enforcement and facility security.Fluke Corporation manufactures electrical testing tools and software for industrial and commercial applications. The company, founded in 1948, is headquartered in Everett, WA.

Manufacturer: Fluke Corporation Brand: Fluke Model: RS120-III

Replacement accessory set for STL120-III and VPS40-III. Set consists of ground leads (2, black), safety rating 600V CAT III, hook clips (1 red, 1 grey), safety rating 600V CAT III, 2 mm add-on test pins (1 red, 1 grey), 1000V CAT II.