Current Probes - Page 32

Manufacturer: Fluke Corporation Brand: Fluke Model: EI-162AC

Fluke EI-162AC Clip-on Current Transformer (Inducing) The EI-162AC Clip-On Current Transformer (Inducing) is used along with the Fluke 1623 or 1625 to perform Selective and Stakeless testing. Selective testing means using one clamp along with earth ground stakes to provide earth ground loop resistance values for one earth ground electrode. Stakeless testing uses two clamps to perform earth ground loop resistance measurement without stakes. Both tests have the advantage of providing measurements with no disconnection from the grounding system! Safer and quicker.

Manufacturer: Harwin Brand: Harwin

Contact Probes 1.27mm SPRING PROBE 2 PART CONVEX HEAD

Manufacturer: IDI Brand: D.I.D.

Contact Probes HEADED .035 60 DEG CHISEL STEEL

Manufacturer: AEMC Brand: AEMC Model: SL261

The model SL261 is designed for AC/DC current measurement capabilities using hall effect technology. It measures from a few mA to over 100A. The "screw driver" shape, with its narrow elongated prod, was chosen to permit probing in crowded cable bundles, or measuring in tight areas such as on circuit boards, motor controllers and automotive circuitry. The electronics and batteries are self - contained in the handles. It is an excellent companion to DMMs, recorders and loggers, oscilloscopes and waveform displaying instruments. Low phase shift also insures reliable power and power quality measurements. The model SL261 is designed for current measuring and displaying on oscilloscopes. AC + DC output signals proportional to the total current are provided for true RMS measurements. Low AC and DC measurements. 50mA to 120AAC/150ADC. Unique design for probing in crowded wiring in industrial and automotive environments. Hall effect sensor technology. Use with DMMs, voltmeters and other voltage measuring instruments. Double insulation, CE mark. 10A and 100A Nominal range. 100mA to 100A Measurement range. Voltage output transformation ratio. 10A-100mV/A, 100A-10mV/A Output signal. Overload: red LED indicates input greater than the selected range. DC to 100kHz (-3dB with current derating) Frequency range. 600Vrms Working/Common mode voltage. 6.5' coaxial cable output termination. Operating temperature: 32 degree to 122 degree F. Storage temperature: -22 degree to 176 degree F. 0.46" Jaw opening. Dimensions: 9-11/128" width by 1-53/128" height by 2-81/128" depth. Weight 11.6oz with battery.

Manufacturer: IDI Brand: D.I.D.

Contact Probes .10 CTR 3 AMP PROBE HEADED 4 PT CRWN STL

Manufacturer: AEMC Brand: AEMC Model: 2124.91

AmpFlex 0.5A to 3000A, 200kHz for Oscilloscope OX series.

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-700SW

DPC/track Software. This product has been replaced by DPC/Track2 which is the CMS software now recommended for use with Fluke 74x and Fluke 75x models. DPC/Track is still applicable for purchase because it provides French, German, Spanish and Italian versions. DPC/TRACK software includes an instrumentation data-base that makes it easy to manage your instrumentation, create and schedule tests, load and unload the 743, print a variety of standard reports, and manage calibration data. Print standard reports automatically. The software assembles pre-formatted reports from your database files, saving time and reducing errors. Reports include calibration certificates, instruments due for calibration, inventory characteristics, calibration histories, calibration procedures, and traceability to instruments touched. User-defined lists enable technicians to select reasons for work, problems found, and actions taken from lists you define. These lists work with your application software to automatically generate a complete record of calibration results and actions that can fulfill documentation requirements for ISO-9000 and other quality regulations.

Manufacturer: Johnson / Emerson Connectivity Solutions Brand: Johnson / Emerson Connectivity Solutions

Test Plugs & Test Jacks BINDING POST BLACK

Manufacturer: IDI Brand: IDGroup

Contact Probes HEADED 4 SIDED CHISE L

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-1587 T

The Fluke 1587 digital insulation multimeter (also known as a multitester) is a true RMS, auto- and manual-ranging meter insulation resistance, current, voltage, and resistance for testing line insulation in telecommunications applications. The insulation test voltage settings of 50V, 100V measure resistance from 0.01 to 100 megohms. The meter also measures capacitance, frequency, and resistance. Temperature is measured using a K-type thermocouple (included). A diode test detects correct functioning of a circuit's diodes. A low-pass filter provides accurate AC voltage and AC frequency measurements on inverters and variable-frequency motor drives by blocking unwanted voltages. Live circuit detection increases user safety by preventing insulation tests when voltages exceed 30V, and auto-discharge of capacitive voltage increases user protection. An audible continuity sensor confirms a circuit conducts electricity. The LCD is backlit for readability in low light. A Hold function freezes the reading on the display. An alarm sounds when the test leads are connected to the wrong jack for the measurement being taken. The unit automatically turns off after 20 minutes of nonuse to conserve battery life or can be disabled for extended readings, and a low-battery indicator signals when the meter's batteries need to be replaced. The meter included a set of detachable test leads, a remote probe, alligator clips, a hard case, and instructions. This true RMS (root mean square) meter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the current or voltage has an undistorted waveform, or nonlinear loads, such as electronic devices or motors, where the current or voltage has a distorted waveform. When turned on, the meter is in auto-ranging mode and automatically selects the correct operating range for the property being measured. It can be switched to manual-ranging mode, which allows the operator to choose the appropriate operating range. The display has a 6,...