Current Probes - Page 33

Manufacturer: Fluke Brand: Fluke Model: 4542286

The Fluke Series Battery Analyzer is ideal test tool for maintenance, troubleshooting and performance testing of individual stationary batteries and battery banks used in critical battery back-up applications.

Manufacturer: Fluke Corporation Brand: Fluke Model: 715

The Fluke 715 Volt/mA Calibrator delivers outstanding performance, durability and reliability. The calibrator is compact, lightweight, and easy to carry. It is EMI tolerant, dust and splash resistant, and features a removable battery door for quick battery changes. Measure loop current (0-20 mA, 4-20 mA) signals with very high accuracy of 0.015-Percent and 1 mA resolution. Measure voltage output process signals from PLC’s transmitters. The 715 is designed to source or simulate a 24 mA loop current and source voltage to 100 mV or 10V. Features 24V loop supply with simultaneous current measurement, improved battery life, 250 ohm HART resistor with loop power, step and linear ramp output function and configurable zero and span settings. The calibrator’s enhanced voltage and current measure and source accuracy creates a highly functional tool. The 715 is compatible with the TPAK ToolPak magnetic hanging system (sold separately). Includes a protective yellow holster with test lead storage, instructions sheet (14 languages), single 9V alkaline battery, test leads and alligator clips, and NIST- traceable calibration report and data. Fluke Corporation is the world leader in the manufacture, distribution and service of electronic test tools and software. From industrial electronic installation, maintenance and service, to calibration and quality control, Fluke tools help keep business and industry around the globe up and running.

Manufacturer: Fluke Corporation Brand: Fluke Model: 2452080

Fluke 726 precision multifunction process calibrator is designed specifically for the Process industry with broad workload coverage, calibration power and unsurpassed accuracy in mind. The 726 measures and sources almost all process parameters and can calibrate almost anything. The 726 will also interpret results without the help of a calculator and store measurement data for later analysis. Measure or source pressure using any of 29 Fluke 700Pxx pressure modules. Source mA with simultaneous pressure measurement to conduct valve and I/P tests. Integrated pressure switch test allows you to capture the set, reset and dead band of a switch. Memory storage for up to 8 calibration results, return stored calibration data from the field for later analysis. Transmitter error percent calculation, interpret calibration results without a calculator. Perform fast linearity tests with auto step and auto ramp features. Power transmitters during test using 24 V loop supply and simultaneous mA measurement. Store frequently-used test setups for later use. Frequency totalizer and frequency pulse train source mode for enhanced flowmeter testing. HART mode inserts 250 ohm resistor in mA measure and source for compatibility with HART instrumentation. Custom RTD curves, add calibration constants for certified RTD probes for enhanced temperature measurement. New voltage input protection design for improved reliability. 3000 m operating altitude. EN 61010-1:1993, ANSI/ISA S82.01-1994; CAN/CSA C22.2 No 1010.1:1992 approved. Runs on 4 AA alkaline batteries. Current DC: 24 mA 0.01 percent + 2 mA. Resistance: 0.0 to 4000 O +/- 0.015 percent. Storage temperature: -20 degrees C to +71 degrees C. 726 including: 1 set of AC72 alligator clips, 1 set of stackable test leads, 1 set of TL 75 test leads, user manuals and NIST- traceable calibration report and data.

Manufacturer: Extech Brand: Extech Model: TL810

EXTECH INSTRUMENTS TL810 TEST LEAD KIT, ELECTRICAL, 1KV

Manufacturer: AEMC Brand: AEMC Model: 2137.75

Battery – of type NiMH 8.4V and are replacements for Models PEL 102 and PEL 103.

Manufacturer: Zhuhai Jida Huapu Instrument Co.,Ltd Brand: HoldPeak Model: HP-90BS Color: blue black 90BS

The HOLDPEAK 90BS Auto / Manual Ranging Multimeter is designed for both commercial and residential applications. It is an auto/manual ranging meter for measuring AC/DC current and voltage, resistance, capacitance, frequency, temperature and duty cycles in commercial, home repair, automotive and electrical testing applications. It comes with non-contact voltage detection, a bright large backlit LCD display and auto power-off feature and also features Data Hold and Max/Min Reading, C/F exchange, Solar Charge, USB Port. Specifications Safety/Compliances: IEC61010 CAT.III 1000V, CAT.IV 600V overvoltage and double insulation standard Display: Maximum reading 6000, analogue bar graph 41 segments Range selection: Auto or Manual Overload display: Display OL DC voltage: 600mV (¡À1.2%), 6/60/600V (¡À0.8%), 1000V (¡À1.5%) AC voltage: 600mV (¡À2.5%), 6/60/600V/750V (¡À1.0%) DC current: 600uA/6000uA/60mA/600mA (¡À1.0%), 6/10A (¡À1.5%) AC current: 600uA/6000uA/60mA/600mA (¡À1.5%), 6/10A (¡À2.0%) Capacitance: 9.999nF (¡À3.0%), 99.99nF/999.9nF/9.999uF (¡À2.5%), 99.99uF/999.9uF (¡À3.0%), 9.999mF/99.99mF (¡À3.5%) Resistance: 600ohm/6k/60k/600kohm (¡À1.2%), 6Mohm (¡À1.5%), 60Mohm (¡À2.5%) Frequency range: 9.999Hz ¨C 9.999MHz (¡À0.5%) hFE: Yes Diode test: Yes Continuity test: Yes Non-contact voltage detection: Yes C/F Temperature Unit Select: Yes True RMS: Yes Relative Value: Yes MAX/MIN Value Test: Yes Solar Charge: Yes USB Port: Yes Dimensions: 6.6¡± x 3.48 x 2.36 Power: 9V 6F22 battery Weight: 0.71 lb Package Includes 1 x HOLDPEAK 90BS Digital Multimeter 1 x Test Leads 1 x special recharge wire 1 x Charger 1 x Carrying Case 1 x Operating Manual 1 x 9V 6F22 battery

Manufacturer: Simpson Electric Company Brand: Simpson

Instrument Protection and Storage CASE FRONT LOAD 260

Manufacturer: Pomona Electronics Brand: Pomona Electronics

Test Clips Mini-Alligator Clip W/2MM Jack Red

Manufacturer: Smiths Connectors / IDI Brand: Smiths Connectors / IDI

Contact Probes CONCAVE TIP PROBE

Manufacturer: Fluke Brand: Fluke Model: FLK-T3000 FC KIT

' Temperature Module, Wireless Temperature Monitoring, K Thermocouple, -328 Degrees to 2501 Degrees Temp. Range (F), Probe Connector Mini, Wire Length 3 ft., -200 Degrees to 1372 Degrees Temp. Range (C), Accuracy 0.50 Percent +/-0.5 Degrees C, For Use With FC 3000 Series Multimeter or PC3000 Series Adapter, Calibration Certificate Available Separately, Includes Bead Probe, Magnet Strap, Information Pack, Manufacturers Warranty Length 3 yr. '