Current Probes - Page 62

Manufacturer: Fluke Corporation Brand: Fluke Model: VPS510-R Color: Red

ScopeMeter Compact Probe for electronic applications, red, 10:1, 500 MHz, 300 V CAT III.

Manufacturer: Johnson / Emerson Connectivity Solutions Brand: Johnson / Emerson Connectivity Solutions

Test Plugs & Test Jacks BANANA PLUG YELLOW

Manufacturer: Fluke Corporation Brand: Fluke Model: STL90

Industrial shielded, 1:1, silicone insulated test lead set. Useful bandwidth 1 MHz. Silicone insulated leads won't crack from cold or melt from accidental contact with hot surfaces. Superior strain relief and flexibility provide extra long life. Compatible with Fluke ScopeMeter test tools shielded test lead set contains of: two shielded test leads: cable length: 1.5 m, safety designed shrouded banana input, safety designed insulated BNC connector, maximum signal voltage: 300 V, maximum voltage to ground: 600 V per IEC 1010-2-031 CAT III, maximum current 3 A Two ground leads: cable length: 250 mm, maximum current 3 A, safety designed shrouded banana jacks Two 4 mm tip adapters, 30 V. Two 2 mm tip adapters, 30 V. Three backprobe pins, 30 V, 1 A. Two insulated alligator clips (AC85A). One year warranty. UL Listed.

Manufacturer: Fluke Corporation Brand: Fluke Model: VPS420-R

Voltage probe set for Fluke ScopeMeter 190 Series II. Ruggedized high working voltage probe. 100:1 attenuation value. 150 MHz bandwidth. 1000V CAT III / 600V CAT IV, working voltage (voltage between probe tip and reference lead): 2000V CAT III / 1200V CAT IV. Red/black color.

Manufacturer: GMW Associates Brand: GMW Associates

The CPCO Series (77mm) DC-AC Current Probes are Clamp On current sensors capable of measuring ac and dc currents available in ranges of +/-500A, +/-1000A, +/-2000, +/-4000A or +/-8000A with an accuracy of +/-1% and non-linearity of

Manufacturer: Fluke Brand: Fluke

Test Probes Fluke-1730 iFlexi 3000A 24 IN

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-71X-TRAP

FLUKE FLUKE-71X-TRAP LIQUID & DIRT TRAP, PRESSURE CALIBRATOR

Manufacturer: Mill-Max Brand: Mill-Max

Contact Probes LOOSE CONTACT Initial Height .197"

Manufacturer: Fluke Corporation Brand: Fluke Model: DP120

Designed to make measurements on signals with floating reference, the DP120 Differential Probe has two probes with shrouded banana probe tips (one red, one black) and shielded cable for improved noise immunity. Input impedance between each input to shielding BNC is 5 megaohms in parallel with 6 pF. Input impedance between the inputs is 10 megaohms with a capacitance of 5 pF. Shrouded banana probe tip Input. 1.5 meter probe length. Maximum input voltage to ground: 600V rms CAT III per IEC 1010-2-031 / 1000Vrms CAT II, per IEC 1010-2-031. Maximum differential voltage: 1000V DC or1000Vrms or 1200V (DC + AC peak). Safety designed 0.5m BNC output cable. 200x and 20x attenuation. DC to 20 MHz (-3 dB) bandwidth. +/-2.5 percent accuracy. 17.5 ns rise time. CMRR: 200x: at 60 Hz = 80dB, at 1 MHz = 50 dB 20x: at 60 Hz = 70dB, at 1 MHz = 40 dB. Battery type: Alkaline 9 volt, NEDA, IEC6LR61. 8-hour operation, 400-hour stand by battery life. PM 8907/80n (optional) power adapter. AC85A large jaw alligator clips and AC83 pin-grabber test clips included accessories.

Manufacturer: Teledyne LeCroy Brand: Teledyne LeCroy

Test Probes 10, 500 MHz, 10 M Passive Probe