Test Probes & Leads - Page 89

Manufacturer: Thermo Scientific Brand: Oakton Model: WD-08517-55

The Oakton Probes with handles feature strain relief spring that protects the cable connection against damage due to repeated flexing and tugging. Standard glass-filled nylon handles measure 5.5"L. Feature color-coded ANSI miniconnectors: type J - black, type K - yellow, type T - blue, and type E - purple. For use with liquids, gases and semisolids Choose from a wide variety of general-purpose standard, micro-, and heavy-duty probes. Standard handle and 5-ft coiled cable. Oakton #: WD-08517-55

Manufacturer: Thermo Scientific Brand: Oakton Model: WD-08516-55

The Oakton Thermocouple probes were designed to measure any general-purpose or liquid immersion application. All thermocouple probes include a 5-ft. PVC coiled cord with strain relief that protects from repeated flexing and tugging. Finger stops on handle prevent probe from rolling and fingers from sliding when inserting probe into hard materials. Rugged plastic mini connector is compatible with all Oakton Digi-Sense and Acorn thermocouple thermometers. Oakton #: WD-08516-55

Manufacturer: Factory Services Brand: Farberware Model: CO-PR3F

Probe control with 1 9 16" spacing between terminals. Fits Farberware and many other brands of electric skillets, frypans, griddles, etc. Will not fit new models which use a magnetic connection.

Manufacturer: Extech Brand: Extech Model: TP870

Type K temperature probe with mini connector Temperature range:-40 to 482-Degrees F (-40 to 250-Degrees C) Type K mini connector Compatible with most meters that have Type K temperature function

Manufacturer: Velleman, Inc Brand: Velleman Model: PROBE60S

Position x1:, attenuation: 1:1, bandwidth: DC to 15MHz, rise time: 23.3NS, input resistance: 1Mohm (input resistance scope), input capacitance: 46PF + cap. Scope, working Voltage: 600V DC Incl. Peak AC derating with frequency. Position x10: attenuation: 1:10, bandwidth: DC to 60MHz, rise time: 5.8NS, input resistance: 10Mohm (if scope input = 1Mohm), input capacitance: +/-15PF, working Voltage: 600V DC Incl. Peak AC derating with frequency, compensation range: 10 to 50PF. Cable length: 4ft. Remarks: with insulated bnc connector.

Manufacturer: Amprobe Brand: Amprobe Model: TL1500

The Amprobe TL1500 test lead set contains two silicone-insulated lead wires, two standard probe tips, two alligator clips, and two spade lugs for connecting a compatible electrical test meter to a device in electrical testing applications. The 48" lead wires have silicone insulation to protect hands from shock and heat. The silicone insulation resists melting in hot environments and becoming brittle in cold ones, and it maintains flexibility better than polyvinyl chloride (PVC) insulation. The standard probe tips are held against the conductor during testing. The alligator clips (also called crocodile clips) have teeth that grip the conductor to provide a more secure, hands-free connection than the test probe tips. The clips are 3.15" long and have a 0.30" jaw opening. The spade lugs clamp to conductors with compression nuts or screws. The lead The lead wires can be used with testing devices that have universal 4 mm jacks. The kit meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for category IV installations up to 1,500V, which covers measurements at the source of the low-voltage supply, such as electricity meters and overcurrent protection devices). It also conforms to applicable European Conformity (CE) directives. The kit comes with a soft folding carrying case with a Velcro closure and pockets for organizing probes and wires. Folded, the pouch measures 4.5 x 7.0 x 0.25 inches (H x W x D). Unfolded, it measures 4.5 x 16.0 x 0.25 inches. (H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.)A test probe, test lead, test prod, or scope probe transmits an electrical signal to a testing device for display and analysis. Designs range from simple test leads with probe-style or clamp-on tips to more complex oscilloscope probes and current detectors. Some test probes, such as basic test leads, have wires with tips for connecting to test equipment. O...

Manufacturer: Elenco Electronics Inc Brand: Elenco Model: LP-525K

The LP-525K Logic Probe kit is a convenient and precise instrument for use in the measurement of logic circuits. It displays logic levels (high or low), and voltage transients down to 25 nanoseconds. The LED readouts provide instant response to the logic state. Large PC board and detailed manual for fast and easy construction. For 30 years Elenco has been using their strong engineering and design skills to develop reliable, affordable electronic test equipment, tools, and educational kits. SOLDERING REQUIRED - ASSEMBLY REQUIREDSPECIFICATIONS - Input Impedance: 1MΩ - Input Overload Protection: 35V DC continuous - Thresholds: Logic 1: TTL 2.3 + .25V - Logic 0: 0.80V + .1V - CMOS: 70% Vcc 30% Vcc - Response better than: 25 nanoseconds - Pulse Detector: 1.5 millisecond pulse stretcher - Power Requirements: 5V Vcc @ 30mA - 15V Vcc @ 40mA - Operating Temperature: 0 degrees C to +40 degrees C - SOLDERING AND ASSEMBLY REQUIRED

Manufacturer: GE Brand: GE

Brand New OEM! GE Part 90 Day Warranty! Geniune Replacement Part

Manufacturer: UEi Brand: UEi Test Instruments Model: ATT100 Color: Yellow

The ATT100 is a K-Type Liquid temperature probe. UEi Test Instruments has over 45 years experience designing and manufacturing a broad range of award-winning, industry-leading Test and Measurement Tools. UEi Test Instruments are sold throughout North America and Canada and professionals recognize the UEi brand for quality and innovative features designed to solve real-world problems. UEi's NIST-certification laboratory is compliant with ISO17025. UEi backs its products with dedicated technical support, service and repair teams.

Manufacturer: Generic Brand: Generic Model: Generic

UNI-T Accessories Durable Kelvin Test Leads Probes Clip LCR Meter Test Line for UT612/UT611