Power Meters - Page 24

Manufacturer: Megger Brand: Megger Model: PVK330

When installing, commissioning and testing a photovoltaic installation additional instrumentation is required to accompany the usual electrician’s test equipment such as the Megger MFT1730 and MFT1835 multifunction testers. The Megger PVK330 photovoltaic kit offers this additional instrumentation in the form of a PVM210 irradiance meter, DCM340 600 A ac / dc clampmeter and a kit of specialist solar testleads.

Manufacturer: NCC Brand: NCC Model: TNC-TM200-120

Thermometer; Digital; -40 to 99 DegreesF Range; 105-135VAC; Red LED Display

Manufacturer: DENT Instruments Brand: DENT Instruments Model: CTR47A4U

RoCoil CTs are designed for use with DENT's Power Scout networked power meters. This Rogowski-type sensor produces an output signal (di/dt) of 131mVAC per 1000A at 60Hz (110mVAC/1000A @ 50Hz). These CTs require a customer-supplied integrator/amplifier (such as the one built in to DENT's ELITEpro SP and Power Scout instruments).

Manufacturer: Megger Brand: Megger Model: PVK320

When installing, commissioning and testing a photovoltaic installation additional instrumentation is required to accompany the usual electrician’s test equipment such as the Megger MFT1730 and MFT1835 multifunction testers.The Megger PVK320 photovoltaic kit offers this additional instrumentation in the form of a PVM210 irradiance meter, a CATIV 10 A dc AVO410 multimeter and a kit of specialist solar test leads.

Manufacturer: UEI Test Instruments Brand: UEi Test Instruments Model: OS11

The Quintox industrial combustion analyzer does the following: Measures: O2, CO, Inlet temperature, Flue temperature - Calculates: Efficiency, CO2, Net stack temperature, Losses, Excess Air, CO/CO2, Poison Index, Net Temperature Differential - Integral printer - 15' handset cable & 15' probe hose w/1000ËšF, 12" shaft - Nearly 2000 test memory slots.

Manufacturer: Compliance West Brand: Compliance West

HTT-1R ExmA, Function Checker, Ground Pass (0.025 Fail 0.1mA) Leakage (Pass 220k Fail 120kohm) Arcover 750V ± 400V. The HTT-1R was designed to provide a fast, safe and reliable way to verify proper operation of Dielectric Withstand (hipot) and Ground Bond Testers between calibration cycles, using actual component values which mimic the product being tested. It provides a stringent periodic check of your production line hipot and ground bond testers as required by TUV and others. The HTT-1R functions like our successful HTT-1 tester, but goes a step further by providing component values as the test loads, instead of opens and shorts provided by the HTT-1. By choosing one of our standard configurations conforming to your testing parameters (or custom parameters based on your requirements), the hipot and ground bond tester in use are checked by realistic component values which mimic the characteristics of your production items. The HTT-1R verifies the result of the three failure modes encountered in production hipot and ground circuit testing (open ground, high leakage current, and dielectric breakdown) separately or in any combination to verify proper test equipment operation. A passing test can also be simulated. The HTT-1R is designed to test up to 30A ground bond testers using these values to simulate actual operation. Connections to the Ground Bond Tester will add approximately 0.03Ω to these values.

Manufacturer: Fluke Corporation Brand: Fluke Model: 2540553

Fluke TPS shunt 20MA. Measuring range selectable per software: 0 to 55 mA. Peak current for sinusoidal currents. 77.8 mA, Imax = 1.5A. Intrinsic error 0.2 percent. Frequency range: DC to 3.0 kHz. Operating voltage: 300 V CAT IV. Phase error: 0.1 degrees.

Manufacturer: AEMC Brand: AEMC Model: 2125.79

The MTX Mobile Multimeter Model MTX 3283B-BT COMCM offers a resolution of 100,000 counts, 0.02% basic accuracy, 200kHz bandwidth and Bluetooth communication technology.

Manufacturer: DENT Instruments Brand: DENT Instruments Model: CT-R72-1310

The DENT RoCoil Current Transformers have been designed for accurate non-intrusive measurement of AC current, pulsed DC or distorted waveforms. This type of sensor may be used to measure AC current over a wide dynamic range and from40Hz to 5 kHz. Note: The RoCoil may require use of integrator/ amplifier. Window Size: 3cm(5"),19cm(7"), 26cm(10"), 58cm(23") Accuracy: < 1%.

Manufacturer: Precision Rated Optics Brand: Precision Rated Optics Model: PM-204B

PM-204B The Precision Rated Optics Power Meter PM-204B (CATV) w/ data storage The Precision Rated Optics 200 Series Power Meters are the advanced version of the PRO 100 Series Power Meters. It is more functional and intelligent. Designed for use in laboratories LANs WANs and CATV as well as longdistance optical network the Optical Power Meters together with PROs Stabilized Laser Sources can be used to identify optical fiber measure optical attenuation verify continuity and evaluate fiber link transmission quality. Download Specifications for PRO 200 Series Power Meters PDF [374 KB]