Oscilloscopes - Page 10

Manufacturer: Tektronix Brand: Tektronix Model: TBS1032B

The Tektronix TBS1000B series digital storage oscilloscopes (DSO) with a range for bandwidth from 30 to 200 MHz and sample rates up to 2GS/s have Automatic measurements, convenience functions such as limit testing, data logging, frequency counter, TrendPlot, context-sensitive help menu, lowest loading for passive probe in this product class with small 3.8mm probe head to get to signals in hard to reach places, industrial grade 7" WVGA (800 x 480 pixels) Active TFT color LCD meaning great waveform viewing and high reliability, uncompromised acquisition rate of up to 2GS/s on all channel, and additional specifications include a rise time of 2.5ns.In addition to basic oscilloscope features, the TBS1000B offers three practical tools to facilitate your work of monitoring and signal capturing. If you are doing automatic tests, limit testing is a feature of TBS1000B in detecting and recording signals falling out of pre-defined templates. If you are in research and production requiring duty-free test, data logging will enable automatic saving of triggered waveforms. Duration can be set from 30 minutes to even infinite. If you are capturing intermittent faults, or monitoring power supply stability over time, then TrendPlot feature will help you plot the trends of any measurements over time.

Manufacturer: Hantek Brand: Hantek DSO5202B

Features: •200MHz bandwidth •1GSa/s Real time sample rate •Large (7.0-inch) olor display, WVGA(800x480) •Record length up to 1M •Trigger mode: edge/pulse width/line selectable video/slop/overtime etc. •USB host and device connectivity, standard •Multiple automatic measurements •Four math functions, including FFTs standard Specifications: •Model:DSO5202B •Bandwidth:200MHz •Channel:2 •Real-Time Sample Rate:1GSa/s •Equivalent Sample Rate:25GSa/s •Memory Depth:1M •Rise Time:1.7ns •Time Base Accuracy:±50ppm •Time Base Range:2ns/div-40s/div •Input Impendance:1MΩ •VOLTS/DIV Range:2mV/div～5V/div •A/D Converter:8 bit •Position Range:±50V(5V/div), ±40V(2V/div～500mV/div), ±2V(200mV/div～50mV/div), ±400mV(20mV/div～2mV/div) •DC Gain Accuracy: ±3% for Normal or Average acquisition mode,5V/div to 10mV/div; ±4% for Normal or Average acquisition mode, 5mV/div to 2mV/div •Bandwidth Limit:20MHz •Trigger Types:Edge, Video, Pulse, Slope, Over time, Alternative •Trigger Source:CH1, CH2, EXT, EXT/5, AC Line •Math:+,-,x,÷,FFT •Cursor Measurement: Voltage difference between cursors: △V; Time difference between cursors: △T; Reciprocal of △T in Hertz (1/ΔT) •Auto Measuerment:Frequency, Period, Mean, Pk-Pk, Cycli RMS, Minimum, Maximum, Rise time, Fall Time, +Pulse Width, -Pulse Width, Delay1-2Rise, Delay1-2Fall, +Duty, -Duty, Vbase,Vtop, Vmid,Vamp,Overshoot, Preshoot, Preiod Mean,Preiod RMS,FOVShoot,RPREShoot, BWIDTH, FRF •Display:7"TFT 16K Color LCD,800*480 dots •Standard Probe:PP200X2

Manufacturer: Gossen Brand: Gossen

Factory Calibration Certificate

Manufacturer: Vizatek

20MHz -Dual or single channel -High sensitivity 1Mv/Div -Z axis input -10 times sweep magnification -Reliable, light electronic encoder -ALT triggering, triggering level lock, auto sync. functions

Manufacturer: Gossen Metrawatt Brand: GOSSEN METRAWATT

Update for METRAWin 90-2

Manufacturer: Docooler Brand: Docooler

The oscilloscope can put the invisible power to the naked eye the electrical signals into visible image, convenient for people to study the changing process of various electrical phenomena. The item with ultrathin and compact design for portable use.Specifications Material: ABS Plug Type: US / EU(optional) Power Supply: AC230V(EU) / AC110V(US) Oscilloscope Probe Model: PP-200 Item Size: Approx.31.5 * 12 * 15cm / 12.4 * 4.72 * 5.91in Item Weight: 2.11kg / 4.65lb Package Size: Approx.38 * 19.5 * 23.5cm / 14.96 * 7.68 * 9.25in Package Weight: 2.99kg / 6.59lbWhat is in the box 1 * Digital Storage Oscilloscope 2 * Oscilloscope Probes(with accessories) 1 * USB Cable 1 * Power Line 1 * Data CD

Manufacturer: GW Instek Brand: GW Instek Model: GDS-1104B

The GW INSTEK GDS-1000B series demonstrates the impeccable functionalities with an extremely ordinary pricing, which allows customers to realize the true meaning of bigger bang for the buck. Although, the GDS-1000B series is under the category of general purpose oscilloscope, the full functionalities within this simple-in-look oscilloscope, including parameter measurement, cursor indication, digital voltage meter, and data logging, surpasses the same category 1000 series oscilloscopes in the market. All applications of the GDS-1000B series can be applied to the educational field and the fundamental R&D units of the industrial sector.The GDS-1000B series features three bandwidth selections ─ 100 MHz, 70 MHz, 50MHz and equips with analog signal input terminals by four or two channels ( 50MHz only equipped 4 channels input ). The maximum sampling rate for each single channel is 1GSa/s, and the memory depth is 10Mpts per channel independently. The waveform update rate is 50,000wfms/s, which helps users to precisely observe the detailed waveform variation. Additionally, 7” WVGA color LCD display and the 256 color gradient display function together allow waveforms to be observed with the senses of transparency and gradation. With respect to the horizontal time scale adjustment knob and trigger level adjustment knob, GW Instek provides a very thoughtful design ─the zero key function, which allows engineers to work more effectively.For mathematical analysis mode, 1Mpts FFT signal display makes the dull frequency domain signal analysis more delicate. Diversified trigger functions, X-Y mode analysis, and Go/NoGo function arm the GDS-1000B series oscilloscope with higher level measurement technologies. The GDS-1000B series oscilloscope also provides Open Wave connection software, which allows users to conduct waveform observation and data storage controlled by remote PC.

Manufacturer: Rigol Brand: Rigol Model: M3TB24

Rigol M3TB24 24 channel MUX Terminal Box Terminal block for MC3324. Terminal block accessory for M300 DAQ system modules with model numbers ending in 24. Measurement Connections Using External Terminal Blocks  M300 provides 6 kinds of terminal blocks to easily connect the signal to be measured to the module. The models of the terminal blocks and corresponding modules are listed in the table below. This section introduces how to use the external block.   Terminal Block Module 1 M3TB32 MC3132, MC3232 2 M3TB64 MC3164, MC3264 3 M3TB24 MC3324 4 M3TB48 MC3648 5 M3TB16 MC3416 6 M3TB34 MC3534 Note: for the MC3724, the signal can be connected to the SMB connectors on the module directly. No terminal block is needed.  WARNING: Cut off all the power supplies before opening the terminal block or removing the terminal block from the module.  1. Place the terminal block with the front (with the RIGOL caption) facing downward and pull the two latches in the arrow direction in the figure below and press them down. Place the terminal block with the front facing upward and pull the upper cover of the terminal block upward and remove it. 2. Connect the cables for connecting the signal under test according to the labels on the circuit board of the terminal block (for the connecting method, refer to Table 1-1). Pass the binding wires through the two groups of holes as pointed out by the arrows in the figure below to fix the cable connected. Pay attention to the channel or terminal connected to the cable to ensure that the signal connected is correct. 3. Connect the terminal block to the module via interface 1 (the interface definition is in Figure 1-7) on the module and screw down the two screw rods onto the nuts on the module. 4

Manufacturer: SainSmart Brand: SainSmart

Overview: DS211 is an update style of DSO201, a pocket size digital storage oscilloscope. Specification:    •Model :DS211    •MCU :STM32F103VC    •ADC :MCU internal ADC    •Number of Channels :Analog channel 1 + 1 internal channel    •Analog Bandwidth :200KHz    •Maximum sampling rate :1MSa/s    •Maximum memory depth :8K    •Horizontal scanning speed :1uS/Div~2S/Div(1-2-5sequence step)    •Vertical Sensitivit :20mv/Div~10V/Div(1-2-5sequence step)    •Input resistance :1MΩ    •Coupling :DC/AC    •Trigger Mode :Ascend/Descend Edge Trigger Mode    •Auto Adjustment mode :AUTO_FIT    •Operation waveforms :-A, RecA, A + RecA    •Signal output :Square wave, sine wave, triangle wave, sawtooth    •Trigger Mode :Auto，Normal，Single，None，Scan    •Measurements :Signal frequency / period / duty cycle, peak voltage / RMS / MAX / MIN / AVG    •Storage :8MB built U disk    •APP can be loaded quantity :1    •Operating :button    •USB Interface :Micro USB    •Battery :550mAh    •Screen size :2.8"    •Screen Resolution :320 × 240    •Machine size (L * W * H) :106.5mmX55.7mmX11.5mm    •Weight (with battery) :65g    •Open source case :Open source application layer    •Authenticate :CE/FCC Package List: 1x DS211 Digital Oscilloscope Device 1x Probe (X1) 1x Allen key 1x Self-printed paper manual Download: http://s3.amazonaws.com/s3.image.smart/download/101-10-156/DS211%20Instruction%20Manual.pdf

Manufacturer: Eleduino Brand: Eleduino

DS202 pocket-size oscilloscope is a 2-channel digital oscilloscope. You will find it compact and fashionable because it is merely 10mm in thickness and enjoys an aluminum alloy appearance. It has touch keys with 320*240 full color TFT display. It supports 8MB storage capacity and USB charging. It is widely applicable in academic experiment, electronics maintenance, electronic engineering tasks, etc. Features: 320*240 Colorful TFT display, mini and compact design with aluminum alloy appearance. 2-channel, 1MHz bandwidth, 1MΩ input impedance, 10MSa/s Max. sample rate. With rising/falling edge, high/low level trigger mode. Math waveform: -A, -B, A+B, A-B,Rec A, RecB, etc. Synchronous mode: Auto, Normal, Single, None, Scan. Inbuilt 8MB U-disk storage for waveform data and images. Modes of vertical precise, horizontal precise measurement and triggering threshold. Auto measurement: frequency, cycle time, duty cycle, DC RMS voltage/Vpp /Vmax/Vmin/Vavg. Inbuilt signal generator/10Hz-1MHz square wave (duty adjustable) or 10Hz-20KHz Sine/Square/Triangle/Sawtooth wave. Built-in 3.7V 550mAh lithium battery, adopts USB interface for charging. Specifications: Channel: 2-channel Analog Bandwidth: 1MHz Max. Sample Rate: 10MSa/s Analog Input Impedance: 1MΩ Horizontal Sensitivity: 1uS/Div~2S/Div(1-2-5 sequence step) Vertical Sensitivity: 20mv/Div~10V/Div (1-2-5 sequence step) Power Supply: Built-in 550mAh Lithium Battery Charging Interface: USB Interface Dimension: 100 * 56.5 * 10mm / 3.94 * 2.22 * 0.4in Weight(with Battery): 90g / 3.17oz Package Size: 14.5 * 9 * 4cm / 5.7 * 3.54 * 1.57in Package Weight: 195g / 6.9oz Package List: 1 * DS202 Oscilloscope 1 * Probe Cable 1 * Hex Key 1 * Pack of Accessories