Oscilloscopes - Page 6

Manufacturer: Hioki Brand: Hioki

Hioki DT4221 Digital Multi Meter The DT4221 is a pocket-sized digital multimeter designed specifically for electrical work requiring optimal safety, with ±0.5% DC V accuracy and wide 40Hz to 1kHz AC V bandwidth. The Hioki DT4200 Digital Multimeter Series consist of a complete lineup of 9 models ranging from professional to industrial to pocket meters, delivering a super fast response rate and safety features that take electrical testing to a higher level. Field-Proven Strength and Usability DT4200 series Robust design capable of withstanding a drop from a height of 1 m onto concrete To test our products' ability to withstand mechanical shock, we repeatedly drop them from a height of at least 1 m until they break. This drop-testing regime leads to more robust products by fostering a series of design improvements. Preventing instrument failure by keeping out dust If dust gets into the instrument's enclosure, it can cause the device to fail. Since dust can get into the instrument especially easily through the gap around the rotary switch, the DT4200 series incorporates a dustproof part known as an O-ring where the rotary switch is mounted to improve the device's dust resistance. Fast, accurate measurement of the output voltage on the secondary side of an inverter The DT series can accurately measure the voltage on the secondary side of an inverter, just like a power meter. Its low-pass filter rejects harmonic components so that the fundamental wave can be isolated and accurately measured. True RMS measurement for accurate measurement of even distorted current waveforms Current waveforms are often distorted, causing the average-value and true RMS measurement methods to yield different results. To obtain accurate readings, RMS measurement is indispensable

Manufacturer: 5430net Brand: C&S Model: conomic oscilloscope

Characteristic: Cost-effectiveness;Excellent industrial design-the same anodised aluminium casing as iPad,which is not only beautiful and tasteful but also greatly enhanced the hardness of aluminum alloy surface,and has good heat resistance and strong wearability Standard USBXITM interface,easyly inserts into USBXITM housing to make up a combination instrument Dimensions (mm):205(L) x120(W) x35(H),be carried easily Waveform average, persistence,intensity,invert,addition,subtraction,multiplication,division,X-Y plot Save waveform in the following: text file,jpg/bmp graphic file, MS excel/word file FFT One computer can connect many DSO, extend channel easily Labview\VB\VC\Delphi\C++Builder Second Design instance Specification: Model: Hantek6022BE Channel: 2 Channels Bandwidth: 20MHz Input Impedance :1MΩ 25pF Max. Sample rate: 48MSa/s Coupling :DC Vertical resolution: 8Bit Gain range:20mV-5V, 8Steps DC accuracy:±3% Timebase range:1ns-5000s,39 Steps Vertical adjustable:Yes Input protection:Diode clamping X-Y:Yes EXT. input:No Trigger Mode:Auto,Normal and Single Trigger Slope:+/-  Trigger level adjustable:Yes Trigger Type Rising edge,falling edge Trigger Source CH1, CH2, EXT Pre trigger:0-100% Sampling selection:Yes Waveform Display: port/line, intensity Network:Open/Close Cursor measurement: Yes Math: FFT, addition, subtraction, multiplication, division.  Cursor: Frequency, Voltage Accessories: S/W CD, probes, manual, USB cord Operating system: Windows 7,Windows NT, Windows 2000,Windows XP, VISTA Supply DEMO code(VC、CVI、VB、LABVIEW) and technical support

Manufacturer: Intrustar Brand: Intrustar

Intrustar ISDS210B dual-channel digital oscilloscope is a low-cost and high-performance product,it is portable and handhelded. it is the best tool for everybody in Electronic field.Two channels, 40M bandwidth 100M sampling rate can meet your test requirement. alternating support X-T and XY alternating pattern. Oscilloscope,DDS signal source, spectrum analyzer are in the oscilloscope. Feature Description Channels :2 Signal source:Sine, Square(Duty circle variable),Triangle,Up Sawtooth,Down Sawtooth,1Hz ~ 20MHz(Sine), 1Hz ~ 2MHz(Others) Spectrum Analyzers:Channels 2,Bandwidth 20M,FFT measure:Harmonic(1-7)、SNR、SINAD、ENOB、THD、SFDR Impedance: 1MΩ 25pF Coupling: AC/DC Vertical resolution: 8Bit Gain range: -16V ~ 16V（probe X1） -160V ~ 160V（probe X10） Vertical accuracy: ±3% Timebase range:1ns-20s Autoset Yes(10Hz to 40MHz) Trigger Mode: Auto、Normal and Signal Trigger Type No、Rising edge、Falling edge、 Rising edge or Falling edge Trigger Source: CH1, CH2 Buffer Size :1MB/CH Bandwidth: 40MHz Sammple rate:Maxmium 100MS/s Vertical mode CH1, CH2, ADD, SUB, MUL PC SYSTEM REQUIREMENTS Windows XP，Win7，Win8，Win10 Pentium or higer processor USB2.0 High speed port 512MB RAM 1GB hard disk space Shippinglist (1)Oscilloscope 1 pcs (2)Probes(X1/X10) 1 set (3)USB cable 1 PCS (4)Signal line (5)CD(user manual and software) 1 disk

Manufacturer: Rigol Brand: Rigol Model: BAG-G1

Instrument Carry Case for a DSA800 Spectrum Analyzer, DG4000 generator, or DS2000 scope.

Manufacturer: Excelvan Brand: Excelvan

Instruction: DSO203/Quad is a digital oscilloscope with pocket size and 4 channels for common electronic engineering tasks. It's based on ARM cortex M3 (STM32VCT6), providing 72Mhz analog bandwidth with integrated FPGA and high speed ADC. Internal 2MB USB disk could be used to store waveform, user application and upgrade firmware. Widely used in the digital oscilloscope market, including communications, semiconductor, computer, aerospace and defense, instrumentation, industrial electronics, consumer electronics, automotive electronics, site maintenance, research, education and many other areas of universal design, debugging, testing requirement. Features: 1. Pocket size and light weight. 2. Two 72Mhz analog channels and two digital channels. 3. Signal generator. 4. Auto measurement. 5. Various triggering option. 6. Easy waveform storage. 7. Firmware upgrade. 8. User application. 9. Open source. Specification: Color: Gray black Analog Channel * 2: [CH_A] [CH_B] Digital Channel * 2: [CH_C] [CH_D] Vertical Scale: 20mV-10V/div(x1 probe) Vertical Solution: 8 bit Input Coupling: AC/DC Max Input Voltage: 80Vpp(x1 probe) Storage: 4K per channel Software Trigger Type: Edge, pulse, level(To be added) Hardware Trigger Type: Edge Trigger Source: CH1/CH2/EXT Test Signal Generater: 10Hz to 1Mhz Storage: Internal 2MB USB disk Auto Measure: Vmax, Vmin, Vpp, Vavr, Vrms, Freq, Period, Pulse, Duty Cursor Measurement: Level, voltage Display Mode: CH1, CH2, EXT, CH1+CH2, CH1-CH2, CH1*CH2 Sampling Mode: Real time Sampling Rate: 1kSa/s - 72MSa/S Power: Lipo battery Package Included: 1x DSO203/Quad with battery 2x MCX osilloscope probes(x1/x10) 1x High quality mini USB cable 1x Flannel bag 1x CD manual

Manufacturer: Hantek Brand: Hantek DSO2090

Channel:2 Channels Bandwidth:40MHz Impedance:1MΩ 25pF Max. Sample rate:100MS/s Coupling:AC/DC/GND Vertical resolution:8Bit Gain range:10mV-5V, 9Steps DC accuracy:±3% Timebase range:4ns-1h, 38 Steps Vertical adjustable:Yes Input protection:Diode clamping X-Y:Yes Autoset:Yes (30Hz to 40MHz) EXT. input:Yes Trigger Mode:Auto, Normal and Single Trigger Slope:+/- Trigger level adjustable:Yes Trigger Type:Rising edge, falling edge Trigger Source:CH1, CH2, EXT Pre/Post trigger:0-100% Buffer size:10K-32KB/Channel Sampling selection:Yes Waveform Display:port/line, waveform average, persistence, intensity Network:Open/Close Vertical mode:CH1, CH2, Dual, ADD Cursor measurement:Yes Math:FFT, addition, subtraction, multiplication, division. Cursor:Frequency, Voltage Data Samples:10K-32K/Channel Accessories:S/W CD, probes, manual, USB cord

Manufacturer: Jinhan Electronic Brand: Jinhan

JDS2022A Input coupling AC、DC Channel 2 Display mode X-Y;Y-T The input impedance 1MΩ 25pF The maximum input voltage 40V（Probe X1）;400V（Probe X1）;2000V（Probe X100) Probe attenuation 1X,10X Attenuation setting 1X,10X,100X Signal acquisition system Sampling method Real time sampling, random sampling The storage depth 4K(2K per channel) Acquisition mode Sampling, peak detect Vertical system Vertical sensitivity 10mV-5V（Probe 1X）100mV-50V（Probe 10X）（1,2.5,5 Stepping） The vertical accuracy +/-3% The vertical resolution 8bit Bandwidth 20MHz Horizontal system The real-time sampling rate 200 MSa/s per channel Horizontal scanning range 10nS/div-5S/div Triggering system Mode Automatic, normal and single Type The rising edge, falling edge Automatic detection Support（50Hz-40MHz） Mathematical operation CH1+CH2,CH1-CH2,CH2-CH1 Measurement system Cursor measurement Support time and voltage Measuring method Manual Measurement The peak to peak value and frequency Equipment Screen 3.2 inch, 16 bit true color, TFT, 320*240 Battery 2000+mA Lithium battery (support 5 hours of continuous work) size 202*100*35（mm）

Manufacturer: Virtins Technology Brand: Virtins Technology

1. Package Contents: (1)VT DSO-2810R unit with a hardware activated Multi-Instrument Standard software license. (2)2 × 60MHz Oscilloscope Probe P6060 with two switchable positions: × 1, × 10. (3)1.5m USB cable. (4)CD (contains the copy-protected Multi-Instrument software). 2. Applications: (1) Ordinary oscilloscope, spectrum analyzer and signal generator functions, all of which work simultaneously. (2) DUT (Device Under Test) analysis such as frequency response. (3) High resolution and low noises at lower sampling rates, 10 voltage ranges from full scale +/-50mV to +/-50V, and support of sensor calibration make it suitable to work as a data acquisition device. (4) Signal Recording and Replaying.....Note: The signal generator function is through the computer sound card.

Manufacturer: Pico Brand: Pico Model: TA167-PICO TECHNOLOGY

Pico TA167 BNC 2000A/200A Current Clamp. 200 A / 2000 A AC/DC current probe, BNC connector The TA167 is a dual-range current probe capable of measuring AC and DC current signals up to 2000 A. Instructions Switch On When the probe is switched on to the required measuring range, the green LED will illuminate. The LED starts flashing when the battery voltage is too low for normal operation and warns the user that it requires changing. This procedure is described below. Auto Power OFF In order to save battery life, the probe will automatically switch itself off after approximately 10 minutes. To disable the Auto power off function, Switch Off the probe and Switch On whilst pressing the auto zero button. The red LED will illuminate and the probe will stay ON until switched off again. Auto Zero The output zero offset voltage of the probe may change due to thermal shifts and other environmental conditions. Select the required measuring range and to null the output voltage depress the Auto Zero button. Ensure that the probe is away from the current carrying conductor whilst the probe is being nulled. Current Measurement 1. Switch on the probe by selecting the required measuring range and check that the green LED is lit. 2. Connect the output lead to the oscilloscope, 3. Zero the probe using the Auto Zero button. 4. Clamp the jaws of the probe round the conductor ensuring a good contact between the closing faces of the jaws. 5. Observe and take measurements as required. Positive output indicates that the current flow is in the direction shown by the arrow on the probe. Battery Replacement The green or red LED will flash when the minimum operating voltage is approached. Use the following procedure: SAFETY WARNING Before removing the battery cover, ensure that the probe is disconnected from the oscilloscope and remote from any live electrical circuit

Manufacturer: Siglent Technologies Brand: Siglent Model: SDS1072CML

Siglent SDS1072CML Bench Oscilloscope (Bandwidth 70MHz) With dual-channel measurements, large color screen and unobtrusive design, the SDS1072CML is a great way to evaluate the status of waveforms and is suitable for use in multiple applications including training centers, calibration laboratories, product quality control and many more. The device’s dual channel capability means it is easily possible to track two measurements at the same time and actively compare the results gained thanks to clear display of each waveform on the device’s 7-inch color display. Different waveforms are also presented in different colors, making identification quick and easy. This device features a number of different settings and features including up to 70MHz bandwidth, 2-channels (with one extension), real time sampling rate of 1GSa/s, equivalent sampling rate of 50GSa/s, memory depth of 2Mpts and multiple trigger types. The SDS1072CML is also suitable for use in many different countries and comes provided with a multiple-language interface. Available languages are English, French, German, Russian, Spanish, Simplified Chinese, Traditional Chinese, Portuguese, Japanese, Korean, Italian and Arabic.