Oscilloscopes - Page 12

Manufacturer: GW Instek Brand: GW Instek Model: GDS-1102A-U

The Instek GDS-1000A-U series is a two-channel, portable digital oscilloscope with a maximum real-time sample rate of 1GS/s, a record length of 2 Mpts, auto-set function, advanced triggering, three math functions and FFT, 27 measurement parameters, an internal memory for data storage, data logging, and USB connectivity for electronics applications such as such as product design, assembly lines, repair and servicing, and electrical engineering, among others. The sample rate and record length enable long capture times for displaying detailed waveforms. An auto-set function automatically configures the optimum settings for displaying waveforms by selecting the horizontal and vertical scales, positioning the waveform horizontally and vertically, and selecting and activating the trigger source channel. In addition to an edge trigger, the unit has pulse width and video triggers for isolating a specific signal. Three math functions—add, subtract, and multiply—plus FFT (fast fourier transform) and 27 measurement parameters such as average, frequency, and peak-to-peak allow an in-depth analysis of waveforms. A go/no go test function promptly indicates when a signal falls outside user-defined settings, and a zoom function magnifies details of waveforms. Up to 15 waveforms or 15 setups can be stored in the internal memory of the oscilloscope. A data logging function tracks data at user-defined timed intervals for up to 100 hours, logging the data on a USB flash drive (sold separately). Additional specifications include a rise time of 5ns for the 70MHz model, 3.5ns for the 100MHz model, and 2.3 for the 200MHz model, and various triggering features. The oscilloscope has a 5.7" color TFT (thin film transistor) LCD with a resolution of 320 x 234 pixels and can show simultaneously show up to two live and two stored waveforms. The oscilloscope has a USB host port for connecting a flash drive (sold separately) to store data and a USB device port for connecting to a PC for storing data and remote operation. The unit m...

Manufacturer: Hioki Brand: Hioki

GP-IB Interface By connecting the 9518-02 GP-IB INTERFACE to the 3157 AC GROUNDING HiTESTER, it is possible to control all the functions of the main unit (except for powering on and off) via the GP-IB bus. This unit is compliance with the following standard. Compliance standard: IEEE 488.1-1987 Further, the 9518-02 is designed with reference to the following standard: Reference standard: IEEE 488.2-1987 On the 9518-02, if the output queue becomes full, it is cleared and a query error is generated. This differs from the IEEE 488.2 specification, which only stipulates the clearing of the output queue and the outputting of a query error when a deadlock state occurs, that is, when both the input buffer and the output queue have become full, and continuation of processing has become impossible.

Manufacturer: Micsig Brand: Micsig Model: TO102I Color: blue

If you want to find a super cost effective digital oscilloscope, Tablet Oscilloscope tBook TO**I series are your first choice. As an oscilloscope hobbyist, it is absolutely what you can't miss. tBook redefines oscilloscope operation experiences; It'll perfectly measure and display waveform in your tablet oscilloscope with touching or sliding by finger gesture; Opening 31 auto measurements in one time; Saving waveforms in one shortcut icon; Swiping downward with three fingers to rapidly open ZOOM & with four fingers instantly to get a screenshot; Built-in 4GB hard disk, Supporting waveform to be viewed locally; Positioning waveform will rapidly be adjusted as the fingers move and all of those will bring you completely new oscilloscope experience. 100MHz or 200MHz bandwidth; 1GSa/s sample rate; Up to 3.6Mpts memory depth; Up to 50,000wfm/s capture rate; 2 or 4 input channels; 1024*600 pixels display resolution; 10.1 inches full touch capacitive screen. Compared with traditional desktop oscilloscope, tablet oscilloscope, apart from basic functions as traditional one has, also has more characteristics and it'll bring you true digital & intelligent oscilloscope experience. 1. Faster response: response speed more fits with brains' and waveform test & operation can show timely; 2. More simple: with intuitive operation experience, no need to remember complicate menu, button & knob functions of traditional ones and with only 1 minute, you can master & operate it skillfully; 3. Higher efficiency: only need 2 or 3 steps to finish what traditional ones finish with over 10 steps; 4. More durable: no aged trouble of button & knob remove your confusion about after-service; 5. Bigger screen：high resolution capacitive screen making waveform more dedicated and protecting engineer's eyes.

Manufacturer: Owon Brand: OWON Model: HDS1022M-N Color: Yellow

The Owon HDS1022M-N is a handheld electrical test device that combines a 20MHz, two-channel, handheld digital oscilloscope for viewing electrical signals with a manual- and auto-ranging digital multimeter for measuring AC and DC voltage to 400V, AC and DC current to 10 amp, resistance to 40 MΩ, and capacitance to 100 μF. The oscilloscope has a maximum real-time sample rate of 100 MS/s and a record length of 6,000 points per channel for acquiring detailed waveforms. Its four math functions—add, subtract, multiply, and divide—plus FFT (fast Fourier transform) and 20 automatic measurements such as period, frequency, and peak-to-peak enable an in-depth analysis of waveforms. Up to four waveforms can be stored in the internal memory. The multimeter has two ranging modes: manual, which allows the user to select the operating range, and auto, which automatically selects the appropriate operating range. The delta relative function allows a measurement to be set as a reference value and displays subsequent measurements as a positive or negative deviation from that value, and the data-hold function freezes a reading on the display to aid documentation. A continuity buzzer confirms that the circuit conducts electricity, and a diode check detects whether a circuit's diodes are working properly. Additional specifications include a rise time of 17.5 ns and various triggering features. The unit has a 3.7" color TFT (thin film transistor) LCD with a resolution of 640 x 480 pixels for viewing waveforms and measurements. An oscilloscope is used for electronics applications such as product design, assembly lines, repair and servicing, and electrical engineering education, among others. A multimeter is an electrical testing tool for measuring multiple properties of an electrical circuit to verify proper operation or diagnose problems.The unit operates on a rechargeable lithium ion battery or an AC adapter (both included). It has a USB host port and connection cable for storing data on a flash drive (sold separate...

Manufacturer: Gossen Metrawatt Brand: GOSSEN METRAWATT

Crank generator for METRISO 5000A.

Manufacturer: Gossen Metrawatt Brand: GOSSEN METRAWATT

Calibrating Adapter for all SECUTEST and METRATESTER.  Application The adapter is used for testing the measuring accuracy of test instruments in accordance with DIN VDE 0701-0702 and IEC 62353 (VDE 0751). As a rule, these instruments must be tested once each year as set forth by accident prevention regulation DGUV provision 3 (previously BGV A3), as well as for certification in accordance with the ISO 9000 quality standard. All measuring ranges for tests required in accordance with DIN VDE 0701-0702 such as protective conductor resistance, insulation resistance, equivalent leakage current and residual and/or contact current must be tested

Manufacturer: OWON Brand: OWON

Model:SDS7102-V(PLEASE BUY FROM AUTHORIZED DEALER:VIVITEQ ,WE ARE IN THE USA ). Description: The SDS7102 is a 2 channel Digital Storage Oscilloscope with 100MHz bandwidth, 1GS/s sample rate, and 8 inches (800x600) color TFT-LCD screen and AutoScale function to simplify the operation. The oscilloscope includes 2 probes, USB cable, probe adjust pen, software CD, power adapter and user manual. Features: 100MHz Bandwidth 1GS/S Real-sample Rate 10M points Record length inch color LCD(800X600 Pixels) Autoscale function Display Grid: 10div, Horizontal: 15 div Size: 340mm x 155mmx 70mm (L*H*W)10. Light Weight: 1.8kg (without battery) Bandwidth is 60-300MHz Sample rate is 500MS/s - 3.2GS/s 10M points Record length USB Interface: This portable scope can be used as USB scope as well, the user can view/measure/save/print waveform on the PC; View and set the horizontal time base of each selected channels; can view and set the Voltage Scale of each selected channels; also the Period, Frequency, and Peak Value of selected waveforms can be displayed. Package Contents: 2 units of 100Mhz probes; Power cord for your country; Driver CD; USB cable; VGA version with LAN module 1x Probe Adjust Pen Manual PLEASE NOTE :THE PACKAGE DOESN'T COME WITH BATTERY .

Manufacturer: Rigol Brand: Rigol Model: DP821

Dual Output, 140 W Power Supply     Remote Controls Methods User-defined Programming You can program and control the instrument using the SCPI (Standard Commands for Programmable Instruments)   Send SCPI Commands via the PC Software You can control the power supply remotely by sending SCPI commands via the PC software (Ultra Sigma) provided by RIGOL.. SCPI Command Overview SCPI (Standard Commands for Programmable Instruments) is a standardized instrument programming language that is built upon the standard IEEE488.1 and IEEE 488.2 and conforms to various standards (such as the floating point operation rules in IEEE754 standard, ISO646 7-bit coded character for information interchange (equivalent to ASCII programming)). This section introduces the syntax, symbols, parameters and abbreviation rules of the SCPI commands. SCPI Status Registers All the SCPI instruments execute the status register operations in the same way. The status system records the various instrument states into three register sets: status byte register, standard event register and questionable status register sets. The status byte register records the advanced summary information reported by other register sets. The SCPI status systems of the DP800 series multi-channel models. Build Remote Communication You can build the remote communication between DP800 and PC over USB, LAN, RS232 or GPIB (option, can be extended via the USB-GPIB interface converter) interface.   OVERVIEW   The DP800 Series Power Supplies combine the ability to source, analyze, and coordinate over time in a powerful new package. The DP800 Series is a family of linear power supplies systems with 3 outputs and up to 195 Watts in total. With one channel isolated users can reconfigure instruments into any number of systems or applications

Manufacturer: Vetus Brand: Hantek Color: Grey

Feature 4 Channel Oscilloscope+8 Channel Logic Analyzer + 25MHz Arb. Waveform Generator(MSO5074FG). Abundant Trigger type: Video, Edge, Slope, Pluse Width, Overtime, Alternative, Code-type, Duration, Queue, Repeat trigger. Large 7 inch 64K color Display, WVGA: 800*480. USB host and device connectivity, standard. Ultrathin desigh, handy volume, easily portable. Oscilloscope 1Gsa/s Real Sample Rate; 4 Channels Oscilloscope; 70MHz Bandwidth, 1MRecord Length; 32 automotive measurement and FFT Analysis for Simplified Waveform Abalysis. Logic Analyzer 8 Channles Logic Analyzer; 500MHz Sample Rate 1MRecord Length Arb. Waveform Generator 25MHz Arb. Waveform Generator Output(Sine wave up to 75MHz) 200MSa/s Sample Rate; 12bit Pattern Generator 50MHz Frenquery Counter

Manufacturer: B&K Precision Corporation Brand: B&K Precision Model: 2532B

The B&K Precision 2530 and 2540 series digital storage oscilloscopes (DSO) have advanced triggering, automatic measurements, FFT, and deep waveform memory for electronics applications such as product design and debugging, repair and servicing, and electrical engineering education. It has a vertical sensitivity to 10mV per division for the full bandwidth and to 2mV per division when the gain control is engaged for capturing low-level signals. An ALT triggering function displays the signal from both channels simultaneously and a hold-off function stabilizes complex signals. The 2530 series has 25 and 40MHz bandwidths with a single-channel sample rate of 500MS/s. The 2540 series has 60 and 100MHz bandwidths with a single-channel sample rate of 1GS/s. The oscilloscopes have USB, RS232, and LAN interfaces for connecting to a computer to view waveforms and readings, and collect data.The 2530 series additional specifications include a rise time of 8.8ns, and the 2540 series additional specifications include a rise time of 3.5ns. Educators can disable the Auto button that would automatically set up the scope to display a signal, requiring the user to learn how to set up scope parameters manually. The oscilloscope has a 5.7" color TFT-LCD with an internal 8 x 12 division grid for viewing waveforms.Oscilloscopes are electrical testing devices used to verify the functionality of an electrical signal generator. Oscilloscopes measure an electrical signal over time, and display the waveform signals in a visual graph. The waveform shows the sweeps (or refresh) of voltage on a vertical (Y) axis, and can display time on a horizontal (X) axis. Details of a waveshape demonstrate the signal over time. Oscilloscopes can display in a digital or analog view. An analog oscilloscope has continuous waveform display, typically in a luminous phosphor. Some oscilloscopes can display more than one channel and type of measurement simultaneously. Some oscilloscopes can capture waveform signals to memory, and recall them. Oscilloscopes may provi...