Function Generators - Page 3

Manufacturer: RF Explorer Brand: EMRSS

This cost efficient model can measure up to 2485 MHz and all ISM frequency bands. With great LCD graphics this analyzer is sure to meet you needs. Designed for all ISM frequency bands, this highly accurate RF handheld spectrum analyzer fits all of your needs at a low cost. It can be used in and outdoors. It is sturdy and compact and comes with a solid aluminium case, a high capacity LiPo rechargeable battery that lasts for 16 hours, free PC software, different functional modes, and an integrated RF Signal Generator. Weight: 185g Size: 113x70x25 mm

Manufacturer: Applied Materials (Amat) Brand: Applied Materials (Amat)

C/A Rf On, Mainframe

Manufacturer: RioRand Brand: RioRand Model: RR-FG-CF-0C

RioRand® RR9010C Function Generator

Manufacturer: Applied Materials (Amat) Brand: Applied Materials (Amat)

Rf Conductor Offset

Manufacturer: Tempo Brand: Tempo Model: 565-001

Tempo 711K 711 Tone and Probe Kit

Manufacturer: UNI-T Brand: UNI-T UTG2025A

Specification:UTG2025A Channels:2 Max.Sample Rate:200MS/s Max.Output Frequency:25MHz Frequency Resolution:1 μHz Vertical Resolution:14 bits Max. Arb Memory Depth:1Mpts Waveform:Sine,Square,Ramp,Triangle,Pulse,Noise,DC,Arb Output Amplitude Range:1mVpp～10Vpp （50Ω）；2mVpp～20Vpp （High Z） Modulation Types:AM、FM、PM、ASK、FSK、PWM、Sweep、Burst Interface:USB Device, USB Host, LAN (UTG2062A ) General Characteristic Power:100-240VAC, 40-440Hz Display:4.3 Inches 64K Color TFT LCD, 480×272 Product Color:White and Gray Product Net Weight:3.2 Kg Product Size:231mm × 94mm × 283mm Standard Accessories:BNC Cable,Power Cord , USB Cable,PC Software CD

Manufacturer: Instek Brand: GW Instek Model: USG-2030

Instek USG-2030 2000MHz to 3000MHz RF Signal Generator GW Instek debuts the brand new USG-Series RF signal generator, which comes with five models to meet users' requirements and is a pocket-sized, and USB interface compatible RF signal generator with the frequency range from 35MHz to 4400MHz. The USG-Series provides continuous wave (CW) signal outputs without any signal modulation function. The built-in electronic attenuator of the USG-Series allows an adjustable power range from -30dBm to 0dBm. The USG-Series has several operational modes including fixed frequency, frequency sweep, frequency hopping, and power sweep. The USB-Series RF signal generator, with the frequency bandwidth limitation, provides lower harmonic output performance.   Test Result of Similataneous Power Sweep and Frequency Sweep   The GW Instek USG-Series RF signal generator is a pocket-sized and USB interface compatible RF signal generator. It covers the frequency range from 335MHz ~ 4400MHz. The USG-Series provides continuous wave (CW) signal outputs without any signal modulation function. The built-in electronic attenuator of the USG-Series allows an adjustable power range between -30dBm to 0dBm. The USG-Series has several operational modes including fixed frequency, frequency sweep, frequency hopping, and power sweep.   Easy to Use Graphical Interface with Numeric Setting   A USG CD-ROM provides dedicated PC application programs, which were developed under JAVA software structure. This USG PC application program supports operating systems such as Windows 2000/XP/Vista/7/8, Linux & Mac OS X through the USB interface.   USG Android APP   Users can download USG APP to smart phone or tablet (or smart phone) and USG. The Android APP application software for the USG signal generator is available on Google Play Store

Manufacturer: B&K PRECISION Brand: B&K Precision

B&K PRECISION 4017A SIGNAL GENERATOR, FREQUENCY/PULSE, 10MHZ

Manufacturer: TTi Brand: TTI

TTi TF960 6GHz Universal Counter USB The TF960 is a high performance bench-top instrument that is suitable for portable applications because of its built-in rechargeable batteries. It has a range of DC to 6GHz and can measure frequency, period, pulse width, frequency ratio, duty cycle, and events. It incorporates a large 10 digit LCD display and has a USB interface for remote control and readback. High measurement accuracy The TF930 and TF960 use a high quality temperature compensated internal frequency reference (TCXO) which has a low aging rate and is stable to within ±1ppm over the full temperature range. Its short warm-up time allows accurate measurements to be made even under portable battery powered conditions. An External Reference input is provided and changeover from the internal timebase is automatic when an external reference standard is connected. High resolution For frequency, period and frequency ratio functions the instrument uses a reciprocal counting technique to provide high resolution at all frequencies. Eight significant digits of answer are produced in a 1 second measurement time, nine digits in 10s and ten digits in 100s with a granularity of less than 2 counts in the least significant digit. Flexible signal conditioning Input A has configurable coupling (AC or DC), input impedance (1MW or 50W), attenuation (1:1 or 5:1), threshold (fully variable) and active edge, and can be used for frequencies in the range 0.001Hz to >125MHz. Input B is a nominal 50W input for frequencies in the range 80MHz to > 3GHz. Input C (TF960 only) uses a standard N connector and has a nominal 50W input for frequencies in the range 1.8GHz to > 6GHz. Multiple measurement functions The TF930 and TF960 can measure frequency, period, pulse width, duty cycle and frequency ratio, as well as event counting (totalise)

Manufacturer: Global Specialties Brand: Global Specialties Model: 9004

The Model 9004 is great for service or Test bench and also for school labs. The touch of a button can select the 5 digit counter to accurately measure the function generator frequency, the RF generator frequency or an external i/p signal. The 9004 combines some most needed Test Equipment in a very special way. It effectively gives you a 1 Hz to 110 MHz generator and a 60W power supply to power your test circuits. The professional will find it covers a broad spectrum of his test needs and the schools will see plenty of experiments with it. A very wide variety of experiments in Analog, Digital and RF can be performed with just this unit. The unit is great for service or Test bench and also simple enough for a school lab. All functions are kept completely independent for full functionality and there is no clutter of switches and knobs. The RF generator covers a frequency range all the way up to the commercial FM band. It also has fixed internal AM and FM modulation and also the facility of external modulation. The function generator features unipolar square/pulse outputs to directly interface to digital circuits, in addition to the standard Sine, Triangle, and Square. There are 2 Outputs-50 Ohm and 600 Ohm to match audio impedances. 100 KHz to 110 MHz RF Generator. 1 Hz to 1 MHz function generator. Variable 32 V, 2A DC power supply with adjustable voltage and current limit. Digital readout for voltage and current. AM Signal: 100 KHz to 110MHz in 7 ranges and continuously variable over the whole range with a coarse and fine control. Modulation frequency: selectable 400 Hz/ 1 KHz. Modulation depth: a) internal modulation 30 percent. b) external modulation: freq. range 50Hz to 4kHz Bandwidth +/-3dB. Output amplitude: 200mV p-p at 75 ohms. Attenuation: 2 x 20 dB step and continuously variable 20 dB (approximate). FM signal: 30 MHz to 110 MHz. Modulation frequency: selectable 400Hz/1kHz.