Multi Testers - Page 68

Manufacturer: Pyle Meters Brand: Pyle Model: PHCT70

The PHCT70 Network Cable Tester is a powerful tool for testing everything from Cat 5, 5e, 6 Network/Telephone to BNC coaxial and other cabling. You'll be able to test installed cabling for short circuits, open circuits, continuity, wiring pattern and cable length. This device makes it possible to test any number of cables all by yourself. You can even measure cable length and recognize pairs without the Far-end Port. You'll have the option of calibrating the length tester so that you know you are getting the right measurements. With WIREMAP, save time and money by knowing you got it right the first time.

Manufacturer: Sanpo Brand: SANPO Model: DT2236B

Features: Model:DT2236B Accuracy: ¡À(0.05%+1 digit) 5 digits 18mm (0.6") LCD Sampling Time: 0.5sec(over 120RPM) Range Select: Auto-Ranging Test Base: 6MHz Quartz Crystal Battery: 3x1.5V AAA battery Detecting Distance: 50~500mm Power Consumption: Approx 45mA Photo Tach: 2.5~99,999RPM Contact Tach: 0.5~19,999RPM Surface Speed: 0.05~1,999.9(m/min) Photo Tach: 0.01RPM(2.5~999.99RPM) ¡¡¡¡¡¡¡¡¡¡¡¡ 0.1RPM(1,000~9,999.9RPM) ¡¡¡¡¡¡¡¡¡¡¡¡ 1RPM(over 10,000RPM) Contact Tach: 0.01RPM(0.5~999.99RPM) ¡¡¡¡¡¡¡¡¡¡¡¡¡¡ 0.1RPM(1,000~9,999.9RPM) ¡¡¡¡¡¡¡¡¡¡¡¡¡¡ 1RPM(over 10,000RPM) Surface Speed: 0.01m/min(0.05~99.99m/min) ¡¡¡¡¡¡¡¡¡¡¡¡¡¡ 0.1m/min(over 100m/min) Package includes: 1 * Tachometer 1 * User Manual

Manufacturer: MAC Brand: MAC

DC magnetic fields can develop in many steel or iron objects if they have been exposed to magnetic fields, current, or friction. Even structural members in barns can become magnetized due to stray voltage. This hand-held device detects residual magnetism in steel parts quickly and accurately. Place it near or against the object being tested, and the needle gauge reads magnitude and polarity of the magnetism in the object at that site. Will also verify thoroughness of de-magnetizing. Check your car, bed frame, desk furniture or any other metal objects you spend time with, even check the strength of magnets.

Manufacturer: (unbranded) Brand: Aprilaire Color: Multicolored

Replacement solenoid water valve for Aprilaire humidifier models 110 and 112. Includes compression washer and nut on inlet side of valve. This is a 120V valve.

Manufacturer: Smart Meter Brand: Smart Meter

The testo 750-1 voltage tester enables voltage or de-energization on electrical circuits or systems to be determined reliably. The instrument meets the latest EN 61243-3:2010 voltage tester standard and has a safety specification according to CAT III. In addition, it is suitable for continuity testing and rotating magnetic field measurement. General technical data Technical data Protection class :IP64 Warranty:2 years Storage temperature: -15 to +60 °C Overvoltage Category:CAT IV 600V; CAT III 1000V Authorizations: TüV; CSA; CE Operating temperature: -10 to +50 °C DC voltage Technical data Measuring range / Resolution： 12 to 690 V / 12 V, 24 V, 50 V, 120 V, 230 V, 400 V, 690 V Accuracy:according to DIN EN 61243-3:2010 AC voltage Technical data Measuring range / Resolution :12 to 690 V / 12 V, 24 V, 50 V, 120 V, 230 V, 400 V, 690 V Accuracy: according to DIN EN 61243-3:2010 Instrument and measurement functions Technical data Continuity Testing: yes Rotating magnetic field testing: yes Single pole phase testing: yes

Manufacturer: Sinometer Brand: Sinometer Model: MS6700

FEATURES LCD digital displayAnolog bar indicatorWide dynamic rangeAuto/Manual rangeFast/Slow response selectableMAX value hold functionA/C weighting selectionDate and time displayAC/DC auxilitary outputBack lightLow power indication SPECIFICATIONS Measurement range 30dB ~ 130dB Accuracy  ±2dBResolution  0.1dBDisplay  3 1/2 digitalsSample rate  2 times/sFrequency range  30Hz ~ 8kHzOver range indication  "UNDER" or "OVER"Low power indication Auxilitary output AC 0.707Vrms at full range for each level,impedance 600ΩDC 10mV/dB, impedance 100ΩBattary voltage 6 x 1.5V

Manufacturer: Craftsman Brand: Craftsman

Digital clamp-on ammeter. Measures AC/DC current up to 400 amps with 3.0 percent (VAC) accuracy without breaking the circuit. Also measures AC/DC voltage, resistance, frequency, capacitance, continuity and diode. Type K thermometer allows for surface or air temperature measurements. Display is an extra large 4000 count LCD screen. Also includes one-touch auto zero, belt holster, molded rubber holster, auto on/off, test leads and thermocouple. Category III - 600 volt.

Manufacturer: Fluke Corporation Brand: Fluke Model: GEO CABLE-REEL 25M

The Fluke GEO reel with 25m/82ft. of red wire cable is used to connect Fluke 1621, 1623, and 1625 testers to stakes for measuring earth ground resistance. The cable ends terminate with a banana plug and a connector to attach the earth ground tester to the Fluke earth stakes. The red cable reel has a hand crank on top of the reel for winding the cable back on the spool after use. The plug and the connector ends of the cable can be inserted into special slots on the reel to avoid unspooling of the wire. Fluke Corporation manufactures electrical testing tools and software for industrial and commercial applications. The company, founded in 1948, is headquartered in Everett, WA.

Manufacturer: Mastech Brand: Mastech Model: MS6514

Features: Automatic shutdown /data hold. Apply to the J / K / T / E / R / S / N type thermocouple. Maximum/minimum/average measurement. Thermocouple deviation to compensate for. Automatic and manual storage Data(1000). USB interface to transfer data. Dual input(T1, T2)/relative time display. User auto-calibration feature. Specifications: Material: ABS housing Suitable for various thermocouples, such as K, J, T, E, R, S, N It can show results with 'C, 'F and K (Kelvin) Maximum, minimum and average value measurement Data hold Thermocouple deviation compensation Relative time display Automatic power-off (automatic power-off time can be set by users) Self-calibration (please read "User Self-calibration" section carefully before using this function) Automatically and manually save data USB port Dual-line input (T1, T2) Power supply: 9V battery Measurement range: - K: -200.0'C to +1372'C / -328.0'F to +2501'F - J: -210.0'C to +1200'C / -346.0'F to +2192'F - T: -250.0'C to +400'C / -418.0'F to +752'F - E: -150.0'C to +1000'C / -238.0'F to +1832'F - R: 0'C to +1767'C / 32'F to +3212'F - S: 0'C to +1767'C / 32'F to +3212'F - N: -200.0'C to +1300'C / -328.0'F to +2372'F - Display Resolution: - 0.1'C / 'F / K 1000 - Accuracy: - K,J,T,E: +/-(0.2% + 0.5'C); R,S: +/-(0.2% + 1'C); N: +/-(0.2% + 0.5'C) - Temperature scale: ITS-90 - Applicable standards: NIST-175 Package: 1 x Thermometer 1 x Carry case 1 x USB Cable

Manufacturer: Fluke Brand: Fluke Model: Fluke 101+ Color: YELLOW AND GREY

MULTIMETER WHICH CAN BE HUNG AS WILL AS WALL MOUNTED