Multi Testers - Page 69

Manufacturer: Extech Instruments Brand: Extech Model: CB10-Kit

Save time and money conducting electrical circuit testing and preventive maintenance checks ensuring all your systems are operating optimally and efficiently with this electrical troubleshooting kit. The kit combines a circuit breaker finder with outlet/GFCI tester, continuity checker/wire tracer, and AC voltage detector with flashlight, in one convenient kit. What's Included: Two 9 V batteries (one each for models CB10 and CT20), and two AA batteries (model DV20) Troubleshooting kit performs up to five functions CB10 Circuit Breaker Finder Quickly locate circuit breakers with audible and visual alert Variable sensitivity adjustment to pinpoint correct circuit breaker LED indicators determine if outlet is correctly wired, and identifies six fault conditions Push button GFCI test UL listed and CE approved CT20 Continuity Tester/Wire Tracer Continuity testing via audible and visual alarms Remote probe with flashing (red/green) LED's - trace up to three cables Easily clips on and hangs from the cable(s) under test without support CE approved DV20 AC Voltage Detector/Flashlight Non-contact detection of AC voltage from 100 VAC to 600 VAC Rugged, double molded housing Built-in bright LED flashlight with ON/OFF button UL listed, CE approved - CAT lll 600 V rated

Manufacturer: AZ Brand: AZ-8685

*Big LCD with dual display *IP65 water proof *pH/ Temperature dual display *Measuring stability indicator *One touch auto-calibration up to 3 points *Calibration values are adjustable *20 mins auto power off *Simple sleep mode disable operation *Data hold function *Battery low indicator *Temperature unit selectable *Cap to keep sensor wet & last life time *pH range:0.0~14.0 *pH accuracy:+/-0.2 *pH resolution:0.1 *Temp. range:0~60.0 C *Temp. accuracy:+/-1 C *Temp. resolution:0.5 *ATC:ATC *LCD size:30(H)x18(W)mm *Operating temp.:0~50 C *Operating RH%:Humidity < 80% *Storage temp.:-10~50 C *Storage RH%:Humidity < 90% *Sensor life time:>6 months (with good maintenance) *Dimension:165(L)x35(W)x32(H)mm *Weight:115g

Manufacturer: Santronics Brand: Santronics

AC Voltage Sensor - 50-1000 VAC The AC Sensor is a hand held device for determining the presence or absence of 50-1000 volts AC in insulated wires, wall receptacles, fuses, junction boxes, switches, and other voltage carrying electrical systems. The AC Sensor determines defective grounds, reverse polarity, and induced voltage. It is not necessary to disconnect the system in question because no contact is required for operation, and current flow is not necessary to locate voltage. Simply touch the plastic tip to a connection point or move it along a wire. If AC voltage is present, the LED light in the tip will glow cherry red.

Manufacturer: Testo Brand: Testo Model: 608-H1

Size Name: Testo 608-H1 Specfication: Display: LCD, 2 lines Storage temperature: -40 to +70 °C Operating temperature: 0 to +50 °C Battery type: 9V block battery Battery life: ca. 1 Jahr Weight: 168 g Dimensions: 111 x 90 x 40 mm Material/Housing: ABS Probe type NTC Meas. range 0 to +50 °C Resolution 0.1 °C Probe type humid. sensor, cap. Meas. Range +10 to +95 %RH Resolution 0.1 %RH

Manufacturer: Smart Meter Brand: Smart Meter

The most cost-effective best selling meter Features w/digital display and analog bar graph Pocket size fashion & rigid design Auto / manual ranging ,4 measurement ranges in 10 steps Max hold Record max / min Fast / slow response is selectable A / c weighting is selectable Easy to calibrate by standard calibrator Analog output Tripod mountable Measure range:A weight: 40dB~130dB weight: 45dB~130dB Digital display resolution:0.1dB Digital updating time :160mS Quasi-analog bar resolution:1dB Bar updating time:40mS Accuracy at 94dB, 1KHz:+/-2dB Analog output:AC 0.707Vrms(FS) Microphone:Dia.6mm electric condenser microphone Frequency range:31.5Hz~8KHz Battery life time:60 hours typical LCD size (mm):30(H)x35(W) Operating temp.:0~50 C Operating RH%:Humidity < 80% Storage temp.:-20~50 C Storage RH%:Humidity < 90% Dimension:57x230x44 Weight:130g

Manufacturer: Actuant Brand: Gardner Bender Model: WIC-100 Color: Red

See behind walls, through pipes, and into ductwork to inspect wiring, appliances, and infrastructure in the safest, quickest and most cost-effective manner possible with the eTEQ TOOLS WiFi Inspection Camera. This value priced device features a water-resistant and non-conductive (up to 500 volts), 3ft flexible tube with a dustproof/water-resistant 9mm camera and adjustable LED lighting at the tip allowing the user to view into spaces they cannot reach due to structural obstructions (like the inside of a wall or above a ceiling). The device creates and utilizes its own private WiFi network - no need for a modem or internet connection - to transmit images from the camera to any iOS or Android enabled smart device (Tablets and Phones) via a free downloadable app. The resulting images are projected in full color and can be captured as still images or video for sending to other devices or people via email. Powered by 4 AA batteries (not included) so you never need to wait to recharge or figure out how to dispose of and/or replace expensive lithium ion batteries. Allows for easy surveying of small, hard-to-reach places. MINI 17/9/5.8/5.5/4.5 mm waterproof camera with 1m (3 ft.) flexible extended tube. Manufactured and tested to IP67 waterproof standard. Video recording and photo capture capability. Adjustable brightness on lens-mounted LED light. Lightweight hand-held design is flexible and easy to use. Three useful accessories included: hook, mirror and magnet.

Manufacturer: ZYB Brand: ZYB

Usually the product will be sent in 2-5 working days and takes about 3--9 business days to reach you Unit Type:piece Package Weight:0.450kg (0.99lb.) Package Size:20cm x 20cm x 10cm (7.87in x 7.87in x 3.94in)

Manufacturer: Ckeyin Brand: Ckeyin

Introduction: It is suitable for monitoring all kind of vibrating mechanical facility, specially the vibration measurement of rotating and reciprocating machinery. The unit can measure acceleration, velocity and displacement, which is widely used in mechanical manufacture, electric power metallurgy and general aviation, etc. Specification: Vibration pickup: Piezoelectric ceramic accelerometer(shear-type) Measurement range of acceleration: 0.1-199.9m/s² peak Measurement range of velocity: 0.1-199.9mm/s rms Measurement range of displacement: 0.001-1.999mm p-p Velocity and displacement  range is limited by acceleration 199.9m/s² Measurement accuracy: ±5%±2digits Measurement frequency range of acceleration: 10Hz-1KHz(LO) 1KHZ-15KHz(HI) Measurement frequency range of velocity: 10Hz-1KHz(LO) Measurement frequency range of displacement : 10Hz-1KHz(LO) Displays update cycle: 1 second LCD display: 3 1/2 digits display Single output: AC output 2V peak(display full scale) Load impedance 10KΩ or more earphones can be connected Power supply : 9V Alkaline battery Static current: ≤20μA Operating current: ≤25mA Battery life: 20 hours continous use Auto power-off: Turns off automatically in 60 seconds LCD backlight: 7 seconds Operating temperature range: 0-40°C Operating humidity range: 30-90%RH Low battery indication : 6.9V±0.2V Product dimension: 18.5x6.5x3cm Aluminum box dimension: 26.5x15.5x7cm Product weight: 167g Aluminum box weight: 561g

Manufacturer: Fluke Corporation Brand: Fluke Model: GEO CABLE-REEL 50M

The Fluke GEO reel with 50m/164 ft. of red wire cable is used to connect Fluke 1621, 1623, and 1625 testers to earth stakes for measuring earth ground resistance. The cable ends terminate with a banana plug and a connector to attach the earth ground tester to the Fluke earth stakes. The red cable reel has a hand crank on top of the reel for winding the cable back on the spool after use. The plug and the connector ends of the cable can be inserted into special slots on the reel to avoid unspooling of the wire. Fluke Corporation manufactures electrical testing tools and software for industrial and commercial applications. The company, founded in 1948, is headquartered in Everett, WA.

Manufacturer: RioRand Brand: RioRand Model: RR-DSO201-PRO Color: RR-Nano-DSO201

The RioRand DSO Nano v2 (New Version) is a Digital Storage Oscilloscope designed for basic electronic engineering tasks. Within its smart shell, the device runs on ARM CortexTM-M3 32 bit platform, provides basic waveform monitoring with extensive functions. It equips 320*240 color LCD, micro SD card storage, portable probes, LiPo Battery, USB connection and signal generator. Due to palm size and handy performance, it fits in-field diagnosis, quick measurement, hobbyist projects and wherever convenience matters. Scheme and source files are also open for re-innovating. Setup your SD card for first time usage: 1. Format SD card with FAT16. 2. Download Datafile. 3. Decompress it, and copy to the root folder of SD card. Notice: This is a NEW VERSION with the software upgrading from lib 2.25 to app2.6.