Thermal Imagers - Page 31

Manufacturer: FLIR Systems Brand: FLIR Model: FLIR i3 Color: Black and Gray

The FLIR i-Series thermal imagers improves your options with a strong line-up of fresh choices to fit the level of detail your application requires. Now with 36% higher thermal resolution than before and a wider field of view to help you image more clearly, scan more quickly, and store an entire scene in one complete picture.Features:Compact, Focus-Free, Easy-to-Use and Lightweight (13 oz)Spot measurement modeTemperature range: -4°F to 482°F (-20°C to 250°C)60 x 60 IR detector resolution (3,600 pixels)Thermal Sensitivity (N.E.T.D)

Manufacturer: Fluke Brand: Fluke

Fluke S3P-TI400 Silver Careplan 3 Year for Fluke Ti400 Thermal Imager.

Manufacturer: REED Instruments Brand: Reed Instruments Model: R2050

This entry-level thermal imaging camera features an 80 x 80 (6,400 pixels) infrared sensor that can detect temperatures between -4 to 662°F (-20 and 350°C). The R2050 is capable of displaying thermal and visual images on a vivid 2.8" LCD display and has the ability to take infrared and visual images and record video with audio (voice annotations).

Manufacturer: Fluke Brand: Fluke Model: 5609-9BND-I

Fluke 5609-9BND-I Probe, Secondary PRT, 100 OHM, 9IN 90 DEG BEND. If you want a very stable thermometer from -200 °C to 670 °C and are particular about the calibration, then look no further than our 5609 Secondary Reference PRT. Its short-term stability at the triple point of water is only ± 7 mK and its one-quarter inch (6.23mm) diameter lets you get accurate measurements in only 100 mm of immersion. The 5608 is also a ± 7 mK probe at the triple point of water, but its one-eighth inch (3.18 mm) diameter gets you accurate measurements from -200 °C to 500 °C with only 80mm (3.1 in) of immersion. With multiple sheath length options on both of these probes, you can find the dimensions that are just right for your specific application. The 5608 comes with a one-eighth inch (3.18 mm) diameter sheath in lengths of 9 inches or 12 inches. The 5609 comes with a one-quarter inch (6.35 mm) diameter sheath in lengths of 12 inches, 15 inches, and 20 inches; or with a 6 mm diameter in lengths of 300 mm, 400 mm, or 500 mm. When looking for improved response time and reduced stem effect in shallow immersion, look for small diameter probes, because the measurement error called stem effect is caused by the diameter of the stem rather than the length of the stem. Both of these probes have InconelTM sheaths and are made using a special manufacturing process, giving them great precision over a wide temperature range. The sensors for these probes are reference-grade platinum and feature four-wire connections with less noisy measurements than two-wire counterparts. These probes come with a certificate of compliance to ensure the meet their specifications. If you'd like, you can also order a NVLAP-accredited calibration from our laboratory, lab code 200348-0. On the report of calibration, you'll get the test data and the ITS90 calibration coefficients that you can easily input into any Fluke Calibration thermometer

Manufacturer: Fluke Brand: Fluke Model: 5609-9BND-S

Fluke 5609-9BND-S Probe, Secondary PRT, 100 OHM, 9IN 90 DEG BEND. If you want a very stable thermometer from -200 °C to 670 °C and are particular about the calibration, then look no further than our 5609 Secondary Reference PRT. Its short-term stability at the triple point of water is only ± 7 mK and its one-quarter inch (6.23mm) diameter lets you get accurate measurements in only 100 mm of immersion. The 5608 is also a ± 7 mK probe at the triple point of water, but its one-eighth inch (3.18 mm) diameter gets you accurate measurements from -200 °C to 500 °C with only 80mm (3.1 in) of immersion. With multiple sheath length options on both of these probes, you can find the dimensions that are just right for your specific application. The 5608 comes with a one-eighth inch (3.18 mm) diameter sheath in lengths of 9 inches or 12 inches. The 5609 comes with a one-quarter inch (6.35 mm) diameter sheath in lengths of 12 inches, 15 inches, and 20 inches; or with a 6 mm diameter in lengths of 300 mm, 400 mm, or 500 mm. When looking for improved response time and reduced stem effect in shallow immersion, look for small diameter probes, because the measurement error called stem effect is caused by the diameter of the stem rather than the length of the stem. Both of these probes have InconelTM sheaths and are made using a special manufacturing process, giving them great precision over a wide temperature range. The sensors for these probes are reference-grade platinum and feature four-wire connections with less noisy measurements than two-wire counterparts. These probes come with a certificate of compliance to ensure the meet their specifications. If you'd like, you can also order a NVLAP-accredited calibration from our laboratory, lab code 200348-0. On the report of calibration, you'll get the test data and the ITS90 calibration coefficients that you can easily input into any Fluke Calibration thermometer

Manufacturer: Fluke Brand: Fluke Model: 5618B-9-S

With each probe you will receive a full NVLAP-accredited calibration report. On the report you'll get the test data and the ITS-90 calibration coefficients that you can easily input into your Fluke Calibration thermometer. The 5618B is also a great probe to use for calibrating your Fluke Calibration 9132 or 9133 infrared calibrators. In fact, these IR black body heat sources were designed to be calibrated with this type of probe. Now you can calibrate these targets in your own lab! For use from -200 °C to 500 °C (the six-inch model goes to 300 °C), you won't find a better industrial standard in this configuration than our 5618B. We recommend using the 5618B PRTs with the 1523, 1524, 1502A, 1529, or 1560 thermometer readouts.

Manufacturer: HT Instruments Brand: HT Instruments

HT Instruments HTFLEX3003 TRMS Flexible Clamp Meter 300-3000A AC with External Driver HTFLEX3003 is an innovative three-phase current transducer that combines easy use with measurement accuracy thanks to Rogowski method. Flexible clamp kit HTFLEX3003 is a 3 flexible clamps for measuring AC current based on the principle of Rogowski up to 3000A. Scales: 300 / 3000A HTFLEX3003 transducer is similar in purpose to a CT or current transformer used to measure three phase currents. Figure 1 shows the three phase current probe. The outputs are max 1V~ analogue voltages proportional to the AC currents in the conductors. The output signals are isolated form the hazardous conductor potentials and are exact replicas of the current waveforms in the conductors. The output signals are available via a 3 pin connector (see Figure 2 below for output signal pin assignment). Standards CE Mark EMC 2004/108/CE Directive LVD 2006/95/CE Directive HTFLEX3003 transducer requires two 1.5V type AA MN1500 LR6 alkaline batteries for operation. The battery compartment is accessed from the rear of the electronics enclosure. HTFLEX3003 transducer and interconnection cables use double insulation to protect the operator from possible hazardous potentials of the bus. Make sure the electronics package is well away from the bus. Each current probe is rated for Installation CAT III, Pollution Degree 2. The maximum voltage to earth rating for the transducer and cable is 1000V~. The maximum voltage to earth rating for the electronics enclosure is 30V~.

Manufacturer: FLIR Systems, Inc. Brand: FLIR Model: AX8

Support for the Ethernet IP field bus protocol (analyze, alarm and simple camera control). Support for the Modbus TCP field bus protocol (analyze, alarm and simple camera control)

Manufacturer: DALI Brand: DALI

shipping:DHL etc Resolution：uncooled 80x80 FOV/Min focuse range:23°×23°/0.1m Thermal Sensitivity：≤0.06℃@30℃ Temperature Range:-20℃-+250℃ Screen：3.2" TFT colorful LCD 240*320 Visual Camera：0.3M pixels Resolution

Manufacturer: Fluke Brand: Fluke

The Fluke 750P3IN Differential Pressure Module is part of a family of pressure models designed for the 750 and 740 series Documenting Process Calibrators and the 720 and 710 series Multifunction Process Calibrators. Differential pressure modules have two pressure fittings and measure the difference between the applied pressure on the high fitting versus the low fitting. The 750P3IN Pressure Modules are easy to use. To measure pressure, connect the pressure module to a pressure source or hand pump and then connect the pressure module cable to the calibrator. Apply pressure from the pressure source and it is displayed digitally on the calibrator. At the touch of a button, the pressure may be displayed in up to 11 different engineering units. A urethane overmolding protects the module against shock damage in case it is dropped and is sealed against any dirt, dust, and moisture. The 750P3IN is clearly labeled for range, over-pressure and media compatibility, and all modules include a NPT, metric (BSP), and M20 adapter. Use With: Any Fluke 740 Series Calibrator Any Fluke 750 Series Calibrator Compatible 720 Series Calibrators Compatible 710 Series Calibrators