Digital Thermometers - Page 39

Manufacturer: Cooper-Atkins Corporation Brand: Cooper Model: 14245-1

Hard Carrying Case with Label and handle. Used for handheld instrumentation storage.

Manufacturer: UEi Brand: UEi Test Instruments Model: THL2 Color: Multicolored

The UEi THL2 Temperature Humidity Logger is designed for recording up to 32,000 Data Points for Temperature and/or Humidity for later analysis. The typical battery life of one year allows for recording over extended periods of time. The magnetic mount allows for hands-free operation. The UEi THL2 is designed with a simple USB connection to allow access to a computer or similar device. The included Windows 7�, Vista, 64 Bit compatible software permits the analysis. Applications include validating cold storage requirements and testing temperature and humidity for comfort.

Manufacturer: Amprobe Brand: Amprobe Model: TMD-51

The Amprobe TMD-51 dual-input thermometer with built-in memory accepts two K- or J-type thermocouples, and is designed to measure two temperatures simultaneously in a variety HVAC, electrical, industrial, and automotive maintenance applications. The thermocouples support superheat and subcool applications, and cut-out and cut-in temperature measurements. The meter has an offset mode that can be used to compensate for thermocouple error. Dual-scale temperature readings range from -328 to 2,498 degrees F (-200 to 1,370 degrees C). Built-in memory saves up to 125 sample reading for later viewing. The meter has a back-lit LCD screen with data hold to save readings for later viewing, and displays minimum and maximum temperature with elapsed time, and average and relative temperature calculations. The device operates on one 9V battery (included), which provides approximately 200 hours of use. The auto-power-off feature turns the meter off after approximately 15 minutes, and can be disabled. A low battery indicator helps prevent false readings. The meter includes two K-type thermocouples, a carrying case, one 9V battery, and instructions. Specifications Display resolution 0.1 degree F/C Accuracy + or - 0.05 percent of reading + 1.4 degrees F (0.7 degrees C) K-type thermocouple temperature range -328 to 2498 degrees F (-200 to 1370 degrees C) J- type thermocouple temperature range -328 to 1922 degrees F (-200 to 1050 degrees C) Measurement rate 2.5 times/second Operating temperature 32 to 122 degrees F (0 to 50 degrees C), at less than 80 percent relative humidity Operating environment Indoors at altitudes below 2000 meters Storage temperature -4 to 140 degrees F (-20 to 60 degrees C), at less than 80 percent relative humidity Dimensions Approximately 6.3 x 3.3 x 1.5 inches (160 x 83 x 38 mm) (H x W x D) Weight Approximately 0.6 lb. (270g), with batteries installed H is height, the vertical distance from lowest to highest point; W is width, the horizontal...

Manufacturer: THEXTON MFG COMPANY INC Brand: THEXTON MFG COMPANY INC

Coil-On Plug Spark Tester-3Pack.

Manufacturer: Thomas Scientific Brand: Thomas Model: 4004

The Thomas Traceable Big Digit Type K Thermometer is used in applications requiring a broad range of temperatures, including furnaces, kilns, freezers, and other industrial applications. The thermometer measures temperature from -50 to 1300 degrees C (-58 to 2000 degrees F), with an accuracy of + or - 0.3 percent plus 1 degree C. The beaded Type K thermocouple probe has a four-foot cable. The LCD display has 5/8"-high digits that are visible from up to 15 ft. The thermometer has a hold feature to freeze the display and capture the current reading and a max hold feature that captures the highest reading over any time period. The thermometer is traceable to National Institute of Standards and Technology standards, indicating that it is calibrated to International Organization for Standardization (ISO) 17025 levels. This Thomas thermometer is used to measure temperature in industrial furnaces, kilns, and freezers.SpecificationsPower source(1) 9V batteryTemperature range-50 to 1300 degrees C (-58 to 2000 degrees F)Temperature accuracy (-50 to 1000 C)+ or - 0.3 percent plus 1 degree CTemperature accuracy (all other measurements)+ or - 0.5 percent plus 1 degree CTemperature resolution0.1 degreeStandard metInternational Organization for Standardization (ISO) 17025Weight7 oz.Dimensions (H x W x D)7.25 x 3 x 1.25 inchesH is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Digital thermocouple thermometers measure the temperature of air, liquids, or surfaces. They may measure temperature in Celsius, Fahrenheit, or both. Thermocouple thermometers are composed of two conductors of different metals, usually alloys of the same metal, which touch at the sensor end of the thermometer. The difference in conductivity between the two metal pieces produces a voltage flow between the sensor end and the open end of each conductor, which can be used to determine the temperature. Different alloys are used for differe...

Manufacturer: Taylor Brand: Taylor

A slim overall profile keeps the readout prominent on the Ultra Slim/Ultra Thin Thermometer. 2.5mm With A 1.5mm Tip • Slim Overall Profile Keeps The Readout Prominent • Temperature Range: -40f To 450f To -40c To 232c • Hold Function • Sleek Storage Sleeve • Includes 1 Cr2032 Battery

Manufacturer: Palmer Wahl Instrumentation Group Brand: Wahl Instruments Model: DHS85XL

The Wahl Heat Spy DHS85XL is our most economical handheld infrared thermometer. Switch between Fahrenheit and Celsius scales. Perfect for close range, non-contact temperature measuring up to 619°F (326°C). Accuracy is ±2% of reading or 2°C, whichever is greater. Resolution is 0.1°F (0.1°C), with a response time of 500ms. Use with or without the installed Laser Sight. The LCD Display is backlit for easy reading in low-light conditions. Spectral range is 5 to 14 microns. Tripod mount fitting on bottom of unit. The DHS85XL automatically powers off after approximately 6 seconds to extend battery life. One year warranty covers defects in materials and workmanship. Dimensions: 5.9" x 5.2" x 1.8" (150mm x 133mm x 45mm). Weight (with battery): 4.7oz (135g).

Manufacturer: Test Products International, Inc Brand: TPI Model: 383

The TPI 383 infrared thermometer with laser is for measuring temperature food safety, automotive repair, manufacturing, electrical, and heating, ventilation, and air conditioning applications. The infrared sensor measures temperature from -35 to 560 degrees C (-31 to 999 degrees F) with a best accuracy of + or - 2% of the reading or 3.5 degrees F, whichever is greater. The infrared sensor measures temperature from a distance for applications involving hard-to-reach, moving, hot, or electrified equipment. It has an 8:1 distance-to-spot ratio, which means the measurement field measures approximately 8 feet in diameter when the target is 1 foot away. A built-in laser pointer helps improve aiming accuracy when taking measurements. The LCD screen displays the current measured temperature, it can recall the last reading measured before the thermometer was turned off. The operator can choose to display readings in degrees Fahrenheit or Celsius. The hold function keeps a measurement on the display so it can be recorded. The display is backlit for readability in low light. The thermometer operates on one 9V battery. It automatically turns off after 10 seconds of non-use to conserve battery life. A soft carrying pouch helps protect the meter during transport and storage.SpecificationsTemperature measurement range-35 to 560 degrees C (-31 to 999 degrees F)Accuracy, at 23 degrees C and 0.95 emissivity+ or - 3 degrees C (5 degrees F) at below 0 degrees C (32 degrees F); + or - 2% of reading or 3.5 degrees F, whichever is greater, at 0 to 960 degrees C (32 to 1040 degrees F)Resolution0.1 degree C or FDistance-to-spot ratio8:1Emissivity0.95, fixedResponse time500 millisecondsOperating temperature and humidity0 to 50 degrees C (32 to 120 degrees F); 0 to 95% relative humidityPower supply9V battery (one, included)Weight200 g (7 oz.)Dimensions*155 x 127 x 35 mm/6.1 x 5 x 1.4 in. (H x W x D)*H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the h...

Manufacturer: Thermco Brand: THERMCO

Thermocouple K Surface Probe w/handle, -100 t0 1100C & F

Manufacturer: Testo Brand: Testo Model: 0563 1080

Testo 108, Food Service Thermometer With Standard Immersion/Penetration Probe, Type K Thermocouple, Soft Case, Probe And Instrument Protection Class Ip 67 including Batteries