Digital Thermometers - Page 59

Manufacturer: Thomas Scientific Brand: Thomas Model: 4233

Shockproof, pocket size thermometer is ideal for lab, plant and field use. New microchip design provides ultra low cost unit. Wide-range, fast-response, and one-switch operation make it the perfect routine thermometer. It is compatible with all Type-K probes. Range -50 to 750 degree C, with a resolution of 1 degree and meter accuracy of +/-(1 degree C + 0.75 percent) between 0 to 500 degree C and +/-(1 degree C + 1 percent) 500 to 750 degree C. Below 0 accuracies are: -20 degree C +/- 2 degree C, -40 degree C +/- 4 degree C, and -50 degree C +/- 5 degree C. To assure accuracy an individually serial-numbered Traceable certificate is provided from our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology). Comes ready to use with a fast-response, Type-K probe with beaded sensor, nylon carrying case, and 9-volt battery (150 to 200 continuous hours). Measures 2.75" width by 4.25" height by 7/8" thick and weight is 4 ounces.

Manufacturer: Thomas Scientific Brand: Thomas Model: 4038

Temperature range os -58 to 572 degree F. Resolution is 0.1 degree from -19.9 to 199.9 degree(otherwise 1 degree ). Accuracy is +/-1 degree C between -20 to 100 degree C. Minimum/maximum memory. Diameter is 1-3/4" by 1/2"; stainless steel-probe diameter is 0.14" by 5"/ 10' cable. Weight is 1-1/2 ounces. To assure accuracy an individually serial-numbered Traceable Certificate is provided from an ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology).

Manufacturer: Dickson Unigage Inc. Brand: Dickson

The MM120 is a simple, cost effective temperature monitoring tool. It does not track detailed temperature history but the min/max display does inform you of temperature highs and lows.

Manufacturer: Thomas Scientific Brand: Thomas Model: 4039

Here’s the perfect thermometer for wet areas. Case is waterproof and shockproof. Use for round-the-clock monitoring of liquids, air/gas, or semisolids in freezers, water baths, outdoor tanks, incubators, and refrigerators. Stainless-steel probe is resistant to most laboratory chemicals. Wide temperature range: Wide range covers 99 percent of the lab’s routine temperature measurements: Range is -50 to 300 degree C with a resolution of 0.1 degree from -19.9 to 199.9 degree (otherwise 1 degree). Accuracy is +/-1 degree C between -20 and 100 degree C. Ultra model accuracy is +/-0.5 degree C at tested points. Easy-view, 1/4" high LCD digits may be read with a glance. Records minimum/maximum readings: At the touch of a button, memory recalls highest and lowest temperature readings over any time period. Reading updates every second. Solid-state construction eliminates dangers inherent in breakable glass and toxic mercury thermometers. All-weather compatible: Thermometer operates without fail in rugged conditions and outdoors. Waterproof construction is ideal for wet labs, wash-down areas, and virtually all field applications. Unit is engineered to be shockproof in drop tests up to 5 feet. Stainless-steel, 4-3/4" long, 0.14" diameter probe, 10-foot cable, and digital-display housing are all waterproof. Traceable to NIST for accuracy: To assure accuracy an individually serial-numbered Traceable Certificate is provided from our ISO 17025 calibration laboratory accredited by A2LA. It indicates traceability to standards provided by NIST (National Institute of Standards and Technology). May be placed anywhere: Supplied with suction cups, magnet to attach to metal, and Velcro to attach to any surface. Comes with Traceable Certificate and 1.5 volt silver-oxide battery for 1-year, continuous, always-on monitoring. Size: diameter is 1-3/4" and depth is 1/2". Weight is 2 ounces.

Manufacturer: Dickson Unigage Inc. Brand: Dickson

The MM125 is a simple, cost effective temperature monitoring tool. It does not track detailed temperature history but the min/max display does inform you of temperature highs and lows.

Manufacturer: KKmoon Brand: KKmoon

This meter with clear and intuitive digital display can show you the temperature and hygrometer values at the same time. It is perfect for use in incubators, brooders, cigar rooms any other place that requires monitoring of temperature and humidity levels. Feature: Clear and intuitive digital display of temperature and hygrometer values. Measuring temperature from -10°C to 50°C. Measuring humidity from 10% to 99%RH. Comes with a probe, which makes it easy to use. Perfect for use in incubators, brooders, cigar rooms any other place that requires monitoring of temperature and humidity levels. Specifications: Humidity: 10%RH~99%RH Humidity accuracy: ±5%RH Humidity display resolution: 1%RH Temperature range: -10°C~50°C Temperature accuracy: ±1°C Resolution: 0.1°C Operating Voltage: 1.5V, or LR44 batteries(Not include) LCD Dimension: 36 * 16mm / 1.4 * 0.6in Probe cable length: 150cm / 59in Color: Black Dimension: 48 * 28 *15mm / 1.9 * 1.1 * 0.6in Item weight: 38g / 1.3oz Package weight: 46g / 1.62oz Package size: 9 * 6.5 * 2.3cm / 3.5 * 2.6 * 0.9in Package List: 1 * Thermometer& Hygrometer (2 in 1) 1 * User Manual(English)

Manufacturer: Thomas Scientific Brand: Thomas Model: 4376

The Thomas Traceable Snap-In Module Thermometer measures temperature in liquids, gases, refrigerators, freezers, and water baths. The thermometer measures temperature from -50 to 300 degrees C (- 58 to 572 degrees F), with an accuracy of + or - 1 degree C. The 2.75" stainless steel probe is attached to the base by a 10-ft. cable. The thermometer has minimum/maximum temperature memory for monitoring the temperature consistency. The thermometer is traceable to National Institute of Standards and Technology standards, indicating that it is calibrated to International Organization for Standardization (ISO) 17025 levels. This Thomas thermometer is used to measure food temperature in restaurants, grocery stores, and other food-safety and food-storage facilities.SpecificationsTemperature range-50 to 300 degrees C (-58 to 572 degrees F)Temperature accuracy+ or - 1 degree CTemperature resolution1 degree CStandard metInternational Organization for Standardization (ISO) 17025Probe length2.75"Cable length10 ft.Weight2 oz.Dimensions (H x W x D)1.5 x 2.44 x 0.5 inchesH is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Digital thermometers are instruments used to measure the temperature of air, liquids, or surfaces electronically. They may measure temperature in Celsius, Fahrenheit, or both. Most digital thermometers use thermistors, which are small electronic resistors. Thermistors are made out of metals that conduct electricity within a certain range and become more conductive the warmer they get. A microcontroller inside the thermometer measures this electrical conductivity and converts it to a temperature, which is displayed on an LCD. Digital thermometers are used in a wide range of applications, including in laboratory settings, food service and storage, and in doctors' offices and hospitals.Thomas Scientific manufactures lab supplies, equipment, chemicals, and instruments for scientific research. It...

Manufacturer: CONTROL COMPANY Brand: CONTROL COMPANY Model: 4148

Perfect jumbo digit thermometer for monitoring freezers, water baths, heating blocks, incubators, and refrigerators. Accurately monitors temperatures with its enclosed temperature-buffered sensor. Bottle insulates sensor from rapid temperature changes when refrigerator door is opened. Triple-display simultaneously shows maximum, minimum, and current probe temperatures plus room temperature. Min/max monitors high/low readings overnight, on weekends, or for any time period—a significant advantage over current reading-only glass thermometers. Range is –58 to 158°F and –50 to 70°C with a resolution of 0.1° and accuracy of ±1°C.

Manufacturer: Reed Brand: REED Instruments Model: ST-610B

This single input type-k thermocouple thermometer features a large backlit LCD display and is capable of measuring -58 to 2000°F (-50 to 1300°C) and 223 to 2000 Kelvin. The ST-610B includes a type-k beaded wire probe.

Manufacturer: Thomas Scientific Brand: Thomas Model: 4425

The Thomas Traceable Workhorse thermometer is a Type K thermocouple thermometer used for measuring temperature in kilns, gas turbine exhaust, ovens, diesel, engines, and other industrial applications. The thermometer measures temperature from -50 to 1300 degrees C (-58 to 2372 degrees F), with an accuracy of + or - 1 degree C, + or - 75%. The 3.125"-long stick probe is 0.125 inches in diameter and is attached to the base with a 40" cable. The recessed front panel has an adjustable offset function that enables the unit to be calibrated to an in-house standard or a particular sensor for increased accuracy. The thermometer is traceable to National Institute of Standards and Technology standards, indicating that it is calibrated to International Organization for Standardization (ISO) 17025 levels. This Thomas thermometer is used to monitor temperature in high-temperature industrial settings.SpecificationsPower source(1) 9V batteryTemperature range-50 to 1300 degrees C (-58 to 2372 degrees F)Temperature accuracy+ or - 1 degree C + or - 75%Resolution0.1 degree C (from -50 to 200 degrees C), 1 degree C outside this rangeStandard metInternational Organization for Standardization (ISO) 17025Weight6 oz.Dimensions, probe (H x diameter)2.125 x 0.125 inchesDimensions, base (H x W x D)5.5 x 2.75 x 1.25 inchesH is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Digital thermocouple thermometers measure the temperature of air, liquids, or surfaces. They may measure temperature in Celsius, Fahrenheit, or both. Thermocouple thermometers are composed of two conductors of different metals, usually alloys of the same metal, which touch at the sensor end of the thermometer. The difference in conductivity between the two metal pieces produces a voltage flow between the sensor end and the open end of each conductor, which can be used to determine the temperature. Different alloys are used for different temperature r...