Thermometers - Page 215

Manufacturer: Taylor Brand: Taylor Precision Products Model: 6095N

1" Dial thermometer. Temperature range 25 to 125 degree F with a degree division of 1 degree F. 1 Point calibration for +/- 2 degree accuracy at dial midpoint, +/- 4 degree accuracy at range extremes. Superior shock protection. Unbreakable polycarbonate crystal lens. Stainless steel 5" stem. Red pointer. Exclusive Safe-T-Set recalibration feature. Storage sleeve with built-in recalibration wrench. Packaged in an individual carton with hang tabs.

Manufacturer: Winters Brand: Winters Instruments Model: TSW65LF

Applications: Hot water lines, boilers and hydronic heating. Warranty: 5 years. Material: Lead Free brass. Connection: 1/2” NPT. Fits Winters TSW174LF thermometer.

Manufacturer: DIGITEN Brand: DIGITEN

Long press UP switch till the number flash to set high temp value,long press DOWN switch till the number flash to set low temp.hold UP and DOWN switch at the same time to correction temp.and the setting value are retained when power cut off. Features Power requirement: DC 12V Measuring range: -76 - 257F Measurement accuracy: 0.1 Display: three 0.56-inch LED digital tube Display color: Red Refresh rate: 200ms/time Power Consumption: 18MA Temperature probe: B3950-10K, waterproof sensor ,wire length o.5m. Dimensions: 80x 43x 25mm,L*W*H (not including mounting ears) Cutting size: 76 x 40mm It will alarm when measuring temp reach to the setting value. Packaging included: Digital Fahrenheit Temperature meter with alarm x 1 Temp sensor x 1

Manufacturer: Adafruit Brand: Adafruit

Your wearable can now keep you from getting sunburnt, with the Flora digital UV index sensor. We took our popular SI1145 UV index sensor and cut out everything you don't need for using with a Flora. It's small, round, and connects to the I2C bus pads. Flora can even use our library code to get calibrated light level and UV index data from the sensor. Please note: this sensor can be used by Flora but is too complex for Gemma! To use: connect the 3V, SDA and SCL, and GND pads of the sensor to your Flora 3V/SDA/SCL/GND pads, in that order. Then load up our Arduino library and example code from the classic Breakout tutorial to your Flora. Technical Details SI1145 Details: IR Sensor Spectrum: Wavelength: 550nm-1000nm (centered on 800) Visible Light Sensor Spectrum: Wavelength: 400nm-800nm (centered on 530) Voltage Supply: Power with 3 VDC I2C address 0x60 (7-bit) Operating Temperature: -40°C ~ 85°C Breakout Board details: Diameter: 14mm / 0.6" Height: 2mm / 0.08" Weight: 0.3g

Manufacturer: Taylor Precision Products Brand: Taylor Precision Products Model: 9847 Color: Yellow

The Taylor Compact Waterproof Digital Thermometer provides superior results for professional and amateur chefs alike. This pen-style thermometer measures temperatures from -40- to 450-degrees Fahrenheit. A large 1.25-inch LCD display provides at-a-glance readings from almost any angle. An anti-microbial housing provides added safety and hygiene. The thermometer also possesses a hold feature so meat can be removed from the oven prior for safer and easier reading. A black nylon lanyard and convenient pocket clip keeps the thermometer close at hand at all times.

Manufacturer: American Educational Brand: American Educational Products Model: 7-6208-A

Packed in clear plastic tube with no-roll sleeve, horizontally graduated, and nitrogen topped

Manufacturer: American Educational Brand: American Educational Products Model: 7-G79

A polished aluminum clamp which will rotate and lock into any position. The clamp will hold a standard-size thermometer securely to a support rod. The clamp will accept rods up to 1/2" in diameter, and will rotate 360 degrees and lock into place.

Manufacturer: Bel-Art Products Brand: SP Scienceware Model: B60700-1600

Contains blue organic liquid against white back glass. Ideal for use in chemical laboratories, universities, scientific institutions, food and beverage processing, petrochemical laboratories, pharmaceutical industry, medical industry, manufacturers, dairies, breweries and distilleries. DURAC Plus General Purpose thermometers individually serialized are hand inspected by our U.S. quality team in our exclusive triple accredited/registered ISO/IEC 9001:2008, ISO/IEC 14001:2004, ISO/IEC 17025:2005 facility and A2LA Accredited Calibration Laboratory; internationally recognized and accepted by the signatory economies of the ILAC/MRA. They are packaged with a multi-language (English, French, German, Italian, Portuguese, and Spanish) Statement of Accuracy indicating accuracy traceable to NIST.

Manufacturer: CDN Brand: CDN Model: Q2-450X Color: Black

Easily check food temperatures in between tasks with the CDN Q2-450X ProAccurate Quick-Read Pocket Thermometer. Equipped with a big-digit display, this thermometer allows you to quickly check readings at a glance while its data-hold feature retains the reading on the screen. Designed to provide accurate measurements, this NSF certified thermometer features a 1.5 mm thin tip, which is excellent for thin cuts of delicate fish or meat and has a 6-second response time and temperature capacity of -40 to 450 degrees Fahrenheit. Perfect for any busy kitchen, this waterproof thermometer is equipped with a stainless steel stem and shatterproof ABS plastic construction. For convenient storage, place this thermometer in its protection sheath with pocket clip and hook. From meats to chocolate, the oven or the freezer, whatever you need a temperature reading on, CDN has the thermometer for the task. Specializing in kitchen measurement tools, CDN produces the widest variety of thermometers, timers and scales on the market. Featuring advanced technology, quality construction, easy-to-read displays and user-friendly operations, CDN thermometers are essential tools in any kitchen. CDN covers the thermometer with a five-year limited warranty.

Manufacturer: Dwyer Instruments, Inc. Brand: Dwyer

Series BTPM Panel Mount Bimetal Thermometers are designed to easily mount in most instrument panels. The front flange has three 5/32" diameter holes to quickly attach the thermometer to the panel. The Series BTPM thermometer has a 3" dial with a scratch resistant glass lens. The Series BTPM Panel Mount thermometers are ideal for HVAC, automotive, and food industry applications, chemical operations, and more.