Thermometers - Page 255

Manufacturer: Thermco Brand: THERMCO

Thermco's Triple Display Digital Thermometer simultaneously shows the current, minimum, and maximum temperatures and updates continuously. An audible & visual alarm will trigger when the temperatures goes above or below the set temperatures. The minimum/maximum feature monitors critical temperature for any period of time, such as overnight or weekends. To comply with regulatory agencies requirements Thermco's Time-Stamp thermometer provides the date and time when the temperature being monitored exceeds the minimum and maximum settings and in real-time. Also an audible alarm will sound and flashing LED will be visible. Each thermometer is certified, serialized and traceable to NIST in Thermco's ISO17025, (Accreditation No. 69071) Calibration Laboratory and accredited by Ilac-MRA to assure accuracy and compliance with regulatory agencies. The thermometer probe is housed in an unbreakable plastic vial filled with a Bio-Safe buffering media which maintains the thermometer reading while the refrigerator or freezer door is open. Thermometers are supplied with dual magnets and velcro sets to allow attachment to walls or doors. Other features include flip out desk stand and wall mounting key hole in back of unit, and supplied with AAA alkaline batteries.

Manufacturer: Ashcroft Inc. Brand: Ashcroft Model: 20EI60R02520/120F

Thermowells must be used on all pressure or velocity applications, to protect the stem of thermometer from corrosion and physical damage, and to facilitate removal of the thermometer without disturbing the process. Maximum ambient temperature is 200°F

Manufacturer: Ashcroft Inc. Brand: Ashcroft Model: 20EI60R02520/120F

Thermowells must be used on all pressure or velocity applications, to protect the stem of thermometer from corrosion and physical damage, and to facilitate removal of the thermometer without disturbing the process. Maximum ambient temperature is 200°F

Manufacturer: Etekcity Brand: Etekcity

Laser Infrared ThermometerSimple Operation - Point and Click!This Etekcity non-contact IR temperature gun is easy to operate. It turns on and begins reading the temperature with one press of the trigger. Clear text displays the measured temperature in either Celsius or Fahrenheit. A laser light aids in aiming, and can be turned on or off. In addition, the readout display features a backlight which can be turned on if neededNOTE:1. The measuring surface is about 2cm below the infrared aiming point.2. For best accuracy, the distance between the thermometer and object of measurement shold approximately be 14.17inches (36cm)SpecificationsTemperature Range:-58℉～1022℉(-50℃～550℃)Accuracy:±2% or 2℃Distance Spot Ratio: 12:1Emissivity Adjustable: 0.95(fixed)Response Time and Wavelength: 500ms and (5-14)umRepeatability:±1% or±1℃Resolution: 0.1℃ or 0.1℉Package Contents1x Etekcity Lasergrip 1080 IR thermometer1x 9V DC battery1x User's manualLaser Distance MeasurerVersatile BuildWhether used for interior design, construction, real estate, landscaping, or sport, the Etekcity HLD40 is engineered to meet your measuring needs with six calculation functions: Area, Height (Pythagorean Theorem), Volume, Area Summation, Addition/Subtraction, and Stake Out FunctionNote: It may result "Measure Error" when background brightness is too high,which may always happen using outdoorsSpecificationsMeasuring Range:0.05-50mMeasuring Tolerance:±2.0mmMaximum Measuring Tolerance:±3.0mmLaser type: 620-690nm,

Manufacturer: Rochester Brand: Miller Thermometer Company

Bimetallic thermometers provide the most precise analog readings for all purpose laboratory and general testing. They can be inserted directly into vessels, vats, glassware, air ducts and open passages.

Manufacturer: Thermo Scientific Brand: Oakton Model: WD-39643-00

The Oakton WD-39643-00 Palm-Sized infrared thermometer measures surface temperature from a safe difference for use in food preparation, field measurements, and mechanical maintenance and troubleshooting. The thermometer measures temperature from - 33 to 250 degrees C (-27 to 482 degrees F), with an accuracy of + or - 2% of the measurement or 2 degrees C/3.6 degrees F, whichever is higher. The thermometer has an 8:1 distance-to-spot measurement ratio with laser sighting for pinpointing the measurement area. A lock function allows for continuous measurements without having to hold down a button. A 90% accurate measurement is available in 1 second, allowing rapid measurement of moving parts. The unit's memory stores minimum/maximum measurements and the unit has a hold function and selectable auto-off. The Oakton WD-39643-00 is used to measure the temperature of hot and cold food products, electrical connections, engine parts, and other surfaces.SpecificationsTemperature range-33 to 250 degrees C (27 to 482 degrees F)Accuracy+ or - 2% or 2 degrees C (3.6 degrees F)Resolution1 degree C/1 degree FDistance-to-spot ratio8:1Power supply(2) 3V CR2032 battery (included)Dimensions (H x W x D)4.5 x 2 x 0.5 inchesH is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Digital infrared thermometers measure the temperature of surfaces from a distance. They may measure temperature in Celsius, Fahrenheit, or both. Infrared (IR) thermometers work by focusing the infrared radiation emitted by a surface onto a detector called a thermopile. The thermopile turns the heat into electricity, which is measured and converted to a temperature reading. The reading is then displayed on an LCD display. IR thermometers are used to measure temperature when an object is fragile, as in ear thermometers, or dangerous to be near, as in the case of industrial equipment.Oakton Instruments manufactures scientific instruments for resear...

Manufacturer: Bel-Art Brand: SP Scienceware Model: B60730-0300

This H-B Instrument DURAC Plus precision liquid-in-glass partial immersion thermometer has a temperature range of 30 to 124°F. Each thermometer is individually serialized and includes a Statement of Accuracy indicating accuracy traceable to NIST. Tested and calibrated in an exclusive triple accredited/registered ISO/IEC 17025:2005, A2LA accredited laboratory against equipment whose calibration is traceable to NIST. Ideal for use in chemical laboratories, universities, scientific institutions, food and beverage processing, petrochemical laboratories, pharmaceutical industry, medical industry, manufacturers, dairies, breweries, and distilleries. Range: 30 to 124°F. Divisions: 0.2°. Length: 460mm (18.1 Inches). Immersion Length: 76mm (3 Inches). Accuracy: 2°F. Thermometer Fill Type: Organic. Glass Type: White Back. Traceable to NIST: Yes. Traceable to DKD/PTB: No. 12/Case. H-B Instrument #: 6/0124. Per Each. HB Instrument #: 6/0124.

Manufacturer: SAMPO Brand: Sampo

Features:Noncontact measuring, Inside laser aimer, White backlight LCD, D:S=10:1Auto-data hold and auto-turn off (Auto turn off after 15sec,when release the button)A great many of emissivity symbolsCan be used for food, safety-inspect£¬fire inspect, power vehicle and diesel engine, plastic factory etcSpecifications:Resolution: 0.5¡ãC(0.5 Degrees F)Measuring Range: -30 to 520 Degrees C(-22 to 960 Degrees F)Response Time: 0.5secSpectral Response: 8 to 14¦ÌmEmissivity: 0.99/0.95/0.89/0.85/0.79/0.75Power Supply: 1*9V battery (not included)Measuring Precision: -30 to 520 Degrees C, ¡À(1.5%+1 Degrees C)¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡-22 to 960 Degrees F, ¡À(1.5%+1 Degrees F)Ambient Operating Range: -10 to 40 Degrees C(14 to 104 Degrees F)Relative Humidity: 10 to 80%RHSKU: X1IN10191Package includes:1 * Non-Contact IR Infrared Digital Thermometer1 * User Manual

Manufacturer: COLE-PARMER Brand: Digi-Sense

Note: the temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C). Gerneral-Purpose Probes with PTFE-Coating Are Designed For Use with Corrosive Chemicals and Strong Acids Response Time: 2 seconds or greater ABS handles provide a light weight design for ease of use along with durability. Probe handles feature a strain relief spring that protects the cable connection against damage due to repeated flexing and tugging. Custom designs or changes to this product are available upon request Each probe comes with color coded ANSI miniconnectors: type J-black, type K-yellow, and type T-blue. Custom designs or changes to this product are available upon request

Manufacturer: Thermo Scientific Brand: Oakton Model: WD-93812-04

This general purpose probe is coated in chemically resistant Teflon.