Thermometers - Page 267

Manufacturer: Miljoco Brand: Miljoco

Industrial Glass Thermometer, Connection Location Lower, Variable Angle, Insertion Length 2-1/2 In., Stem Length 3-1/2 In., Temp. Range (F) 0 Degrees to 120 Degrees F, Scale Divisions 1 Degrees , Case Material Die Cast Aluminum, Temp. Range (C) -10 Degrees to 50 Degrees C, Stem Dia. 0.457 In., Connection Size 1-1/4-18, Fill Non Toxic Blue Organic Liquid, Accuracy +/-1 Scale Division, Case Color Green, Scale Material Aluminum, Scale Color White with Black Markings

Manufacturer: COLE-PARMER Brand: WIKA

Our Process Grade bimetal thermometers offer a 3" and 5" dial size and are ideal for most rugged industrial temperature measurement applications. The hermetically-sealed case offers protection from weather and dust, and is guaranteed against fogging up. An inert gel is used to minimize pointer oscillation. These thermometers are guaranteed for seven years. WIKA Bimetal thermometers are manufactured to ASME B40.3 standards.

Manufacturer: Taylor Instruments Brand: Taylor Instruments

Taylor Dishwasher Thermometer Test Strip - 24 per pack. These Taylor Precision 8750 single-use, adhesive thermometer test strips are used to test the temperature of your dishwasher. FDA approved and meets the 180 degrees Fahrenheit minimum required temperature for washed dishes and are accurate to +/-2 degrees Fahrenheit. Theyre easy to use, respond quickly with high color contrast change to verify that proper sanitizing temperature is reached.

Manufacturer: WIKA Instrument Corporation Brand: WIKA Model: 33025D216G4

WIKA's industrial grade bimetal dial thermometer, TI.33 is an ideal choice where a weather-resistant, tamper-proof thermometer is needed. There is a 1 year warranty. Over Range: Temporary over or under range tolerance of 50 percent of scale up to 500 oF. (260 degree C). For ranges above 500 degree F, maximum over range is 800 degree F; continous. 1000 degree F intermittent. Connection: Material: 304 stainless steel enter back mount (CBM); 1/2" NPT connection. Stem Material: 304 stainless steel Diameter: 1/4" (6.35 mm). Measuring Element: Bi-metal helix. Dial: White aluminum, dished, with black. Case Material: 304 stainless steel Hermetically sealed Ingress protection IP 65. Pointer: Black aluminum. Standard Scales: Single: Fahrenheit or Celsius Dual: Fahrenheit (outer) and Celsius (inner). Window Gasket: Neoprene Silicone (-100 degree F and over 550 degree F). Window: Flat instrument glass. Dampening Inert gel to minimize pointer oscillation.

Manufacturer: Tel-Tru Manufacturing Company Brand: Tel-Tru Model: 33100414

The Model GT300 is the ideal thermometer for general industrial and heavy duty applications. The unique stem groove to identify the min. immersion for accurate reading. Glass window that is fully gasketed.

Manufacturer: Thermco Brand: THERMCO

Thermco's ACCU-SAFE - Enclosed Chamber Thermometers are precise, reliable and an economical means of measuring critical temperatures in Blood Bank Refrigerators, Ultra-Low Freezers, Freezers, Refrigerators, Incubators, Ambient/Room, Block Heaters and Ovens. All thermometers have their own unique serial number and is supplied with a NIST (National Institute of Standards and Technology) certificate to indicate the traceability of each thermometer and the standard used in the certification testing. ACCU-SAFE Environmentally Friendly Thermometers are Spirit-Filled (Non-Mercury). Mercury model also available. Each thermometer is encapsulated in a PTEF flouropolymer safety-shield which absorbs shock, and will enclose the liquid and splintered glass within the coating should breakage occur. There by keeping contaminants from user and environment. ACCU-SAFE thermometers are housed in a unbreakable plastic bottle filled with a "NON-TOXIC" Bio-Safe insulating liquid. This medium is used to maintain the temperature to insure accurate temperature readings without being affected by opening and closing of chamber door. All Thermometers have thoroughly annealed glass and engraved stems for lasting accuracy in 0.1°C, 0.5°C and 1.0°C divisions to enhance the critical measurements demanded by today's regulatory agencies. Space Saving Magnets are supplied which can be adhered to the bottle allowing the thermometer to be attached to a steel wall or door. Block Heater thermometers are housed in a 1.5ml MICRO centrifuge tube with 1ml of USP white mineral oil.

Manufacturer: CeilBlue Brand: CeilBlue

Hi-Lo Thermometers with 1 Resolution - The triple display simultaneously shows high, low, and current temperatures while the min/max memory monitors high/low readings overnight, on weekends, or for any time period - a significant advantage over "current reading-only" glass thermometers. An alarm alerts you when the temperature rises above or falls below a set point and is programmable in 1 increments. Visual and audible signals continue even if temperature returns to non-alarm range. The 10-foot long micro-cable permits refrigerator doors to close on it without affecting the seal.

Manufacturer: TEL-TRU Brand: Tel-Tru

' Laboratory Dial Thermometer, Bimetal, Dial Size 1-3/4 In., Connection Location Back, Stem Length 12 In., Temp. Range (F) 0 Degrees to 220 Degrees , Stem Material Stainless Steel '

Manufacturer: PIC Gauges Brand: PIC Gauges Model: B5B2-EE

Pci Bimetal Thermometer Are All Stainless Constructed with Zero Adjustment on Back of Case. This Thermometer Is Vibration Resistant And Hermetically Sealed (Moisture Proof). Stem Welded To Connection. +/- 1 % Full Scale Accuracy.

Manufacturer: Thomas Scientific Brand: Thomas Model: 4727

The Thomas Traceable Memory Monitoring Plus thermometer is used for measuring temperature in freezers, refrigerators, incubators, water baths, and heating blocks. The thermometer measures temperature from -50 to 70 degrees C (-58 to 158 degrees F), with an accuracy of + or - 1 degree C. The 0.75" long bottle probe insulates the sensor from temperature changes from opening doors. The probe has a 10-ft. micro cable that is thin enough to be closed in a freezer door without compromising the door seal. The thermometer has a minimum/maximum temperature memory and a user-programmable temperature alarm. Visible and audible alarms indicate when the temperature has risen or fallen outside of set limits, and the alarm continues to go off until reset by the user, even if the temperature returns to an acceptable level. The thermometer is traceable to National Institute of Standards and Technology standards, indicating that it is calibrated to International Organization for Standardization (ISO) 17025 levels. This Thomas thermometer is used to monitor temperature in restaurants, grocery stores, and food processing facilities.SpecificationsTemperature range-50 to 70 degrees C (-58 to 158 degrees F)Temperature accuracy+ or - 1 degree CResolution0.1 degree C/0.1 degree FStandard metInternational Organization for Standardization (ISO) 17025Weight4oz.Dimensions, probe (H x diameter)2.5oz.Dimensions, base unit (H x W x D)3.25 x 2.5 x 0.625 inchesH is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Digital thermometers are instruments used to measure the temperature of air, liquids, or surfaces electronically. They may measure temperature in Celsius, Fahrenheit, or both. Most digital thermometers use thermistors, which are small electronic resistors. Thermistors are made out of metals that conduct electricity within a certain range and become more conductive the warmer they get. A microcontroller inside the ther...