Moisture Meters - Page 11

Manufacturer: eBoot Brand: eBoot

eBoot soil moisture sensor meter test your soil moisture timely and accurately, always keep your plants fresh. Specifications:  Color: green Probe length: 20 cm/ 7.8 inch Total length: 27.5 cm/ 10.8 inch Battery required: no Scales in screen:  1 - 3: red front, means dry soil 4 - 6: green front, means normal 7 - 8: blue front, means wet soil How to use:  Step 1: Inset the probe of the meter to the plants' roots about 2 - 4 inches.  Step 2: Adjust the position of the probe until the pointer on the dial swings slightly.  Step 3: After 10 minutes, note moisture level in the dial.  Step 4: Remove probe from soil and wipe clean after each use.  Notes:  1. Don't touch the stone or hard objects since it will be easy to damage the probe.  2. After using, need to clean and wipe the probe. (can't test the water)  3. Don't inserted in the soil for a long time for using.  4. Design for testing soil level. Don't use it to test pure water or too rigid ground.  Package:  1 x Soil moisture sensor meter

Manufacturer: Flashmen Brand: Flashmen

Package include: 1 x Digital Skin Moisture Meter

Manufacturer: RISEPRO Brand: RISEPRO Model: MT-10 Color: 2 Pins Type

Brief Description RISEPRO® Moisture Meter adapts a direct and accurate method to measure moisture level by penetrating 2 rug and sharp pins (each pin is 0.4inch or 10mm long) into the wood. Direct pins penetration can assure the highest accuracy of your measured moisture readings. It categories into 4 types of woods for selection: A. Teak, Walnut, Afrormosia, Rubber Tree, Imbuia, Kokrodua, Niove Bidinkala, Cork B. Keruing, White Poplar, Beech, Cedar, Tola C. Lauan, Ash, Elm, Fir, Maple, Padauk, Oak, Cherry D. Basswood, Larch, Pine, Birch Specifications Large and clear display : 1.7 Inch (4.25mm) 2 metal pins : each approx. 0.4 Inch (10MM) 4 types of wood species for selection Measure range : 0 ¨C 99.9% Resolution : 0.1% Accuracy : +/- 0.5% Data hold function Auto power off : approx. after 15 minutes without operation Power supply : 1x 9V battery (not included) Item dimension : 5.7 x 2.6 x 1.3 Inch (145 x 67 x 32mm) Item weight : 3.7 oz (104g) One Set Included 1 x Moisture Meter 1 x Instruction Manual Color gift box package

Manufacturer: Moneual Brand: Moneual Color: Green

HOW TO INSTALL 1. Please insert enveloped battery at the top of gadget 2. Press switch for 2 seconds and it will turn on automatically (LED emits) HOW TO USE 1. Give water to the flowers 2. Set up the MY Flower Alarm Level - Plants to fill up water for 15~30 days : Step 1 - Plants to fill up water for 7~15 days : Step 2 - Plants to fill up water for 7 days : Step 3 3. After turning on MY FLOWER, please press switch at the side of My Flower Whenever you push the switch, the set up will change to Step 1 -> Step 2 -> Step 3 -> Step 1 Please select step that you want, Press switch for 3 seconds 4. Input MY FLOWER to your pot

Manufacturer: SEDNA Brand: SEDNA Model: SE-EM4806-FBA Color: blue

Features : This instrument can be used to measure the moisture level in sawn timber (also paper, cardboard) and hardened materials (mortar, concrete and plaster). It displays the moisture level directly. In addition, it can also measure environment temperature. It is portable and very easy to use. Specification : Display : LCD Measure Range : Wood : 6-42%, Material : 0.2 - 2.0 %, Temperature : 0-40 degree C or 32 - 99 degree F Resolution : Wood : 1%, Material : 0.1%, Temperature : 1 degree C or 2 degree F Accuracy : Wood : Reading =30% : +-4% Material : Reading = 1.4% : +-0.2% Automatic Power Off Battery : LR44 x 4 (not included due to Air Parcel Shipping policy) Size : 80x40x20m Weight : about 500g Package Content : 1 x Moisture Meter 1 x User Manual

Manufacturer: FLIR Systems, Inc. Brand: FLIR Model: MR02

The MR02 is a replacement pin probe for FLIR's MR77 moisture meter. The MR02 connects via RJ45 connection. Comes with a two year warranty.

Manufacturer: Tramex Brand: Tramex Model: RHIH

Non-destructive Relative Humidity testing per ASTM F2420 of concrete and other floors and screeds, the Trammel Hygrohood is an insulated relative humidity hood used in conjunction with the CMEX2 and the MRH3 together with Hygro-i RH probes.

Manufacturer: TOOGOO (R) Brand: TOOGOO(R) Color: As shown

* TOOGOO is a registered trademark. ONLY Authorized seller of TOOGOO can sell under TOOGOO listings.Our products will enhance your experience to unparalleled inspiration. TOOGOO(R) SM206 Digital Solar BTU Power MeterThis meter is a precision instrument for measuring the glass light intensity. It is used in solar radiation measurement, solar research, physical and optical experiments, metrology, and agriculture. It can also be used to measure glass light intensity to verify glass properties.Display: 3 3/4LCD display, maximum displayed numerical value 3999Resolution: 0.1W/mm2, 0.1Btu/(ft2-h)Error Range: +-10W/mm2 (+-3 Btu/(ft2-h)) or +-5% of the measured valueTemperature error: +-0.38W/m2/degreeOverload display "OL"Range: 0.1~399.9 W/m2, 1~3999W/m2, 0.1~399.9 Btu/(ft2-h), 1~3999Btu/(ft2-h)Sampling time: 0.5 secondOperating Environment: Temperature: 0~50 Centigrade (32~122 Fahrenheit)Power: one 9V battery (model 6F22)Dimension: 132L*60W*38H (mm)Package Content:1 * Power Meter1 * 9V battery1 * User manual1* Carrying caseNote:Light shooting and differnent displays may cause the color of the item in the picture a little different from the real thing.The measurement allowed error is +/- 1-3 cm.

Manufacturer: Hanna Brand: Hanna Instruments

The HI 98129 Combo waterproof tester offer high accuracy pH, EC/TDS and temperature measurements in a single tester! No more switching between meters for your routine measurements. The waterproof Combo (it even floats) has a large easy-to-read, dual-level LCD and automatic shut-off. pH and EC/TDS readings are automatically compensated for the effects of temperature (ATC). This technologically advanced tester has a replaceable pH electrode cartridge with an extendable cloth junction as well as an EC/TDS graphite electrode that resists contamination by salts and other substances. This gives these meters a greatly extended life. Your tester no longer needs to be thrown away when the pH sensor is exhausted. The EC/TDS conversion factor is user selectable as is the temperature compensation coefficient (ß). Fast, efficient, accurate and portable, the Combo pH, EC/TDS and temperature tester brings you all the features you've asked for and more!

Manufacturer: Comprotec Canada Brand: Comprotec Canada Model: 19921

The Timber Check Moisture Meter allows you to take moisture readings in any species of wood with a moisture content of 6 to 25 percent. Durable fixed component circuitry virtually eliminates the possibility of false readings and never needs to be recalibrated. All components, including probing pins, are securely held in place with screws and are non corrosive. Measures 6 3/4" long and comes complete with an extra set of probing pins, one 9 volt battery, a wood species moisture chart and instructions.