Moisture Meters - Page 18

Manufacturer: Delmhorst Brand: Delmhorst Model: H-4

Electrode handle that attaches to the built-in connector on the top of any moisture meter. Can be used with the 830 series prods, 831 short pin disc shaped prod, and 832 long pin disc shaped prod. This is useful for large or high density bales of hay or scrap paper. Two handed operation is recommended over using a prod that connects directly to the top of the meter (like our 1235 series) to minimize stress placed on the meter casing.

Manufacturer: home-free Brand: HomeFree

Specifications: Model: MS6612 Sensor: silicon photoelectric diode Sampling rate: more than 2 times/ second Spectral measurement range: 320-730nm Lux measurement range: 20/200/2000/20000/200000Lux (20/200/2000/20000Fc) Power supplied by: 1 * 9V 6F22 battery (not included) Battery lifespan: about 200H Operation temperature: -10 to 50 Celsius degree Operation humidity: less than80%RH (non-condensed) Storage temperature: -10 to 50 Celsius degree Storage humidity: less than 70%RH (non-condensed) (removing battery) Color: green & black Product size: approx. 170 * 85 *40mm Net weight: 247g Package included: 1 * Lux meter 1 * Storage bag

Manufacturer: Zircon Brand: Zircon Model: 68318 Color: Audio Only

Zircon leak alert electronic water detector is now available in a large contractor pack which includes 8 leak alert units complete with 9-volt batteries for immediate use. Zircon leak alert is perfect for use near water heaters, sinks, dishwashers, sump Pumps, and more. Protect your home from water damage by placing leak alert anywhere the potential for flooding or leaks exist. Loud (85dB) alarm sounds with direct water contact. Fully automatic operation, no wiring required. Should flooding occur, the leak alert will float and send out an audible signal that'll last for up to 72-hours. Operation includes a low battery warning for optimum performance. The larger pack allows you to save money and protect the entire house with one purchase.

Manufacturer: FLIR Brand: FLIR Model: MR40

The FLIR MR40 is a rugged 2-pin,‎ single-scale moisture meter with an integrated flashlight for wood and common building materials—ideal for builders,‎ building inspectors,‎ remodelers,‎ moisture remediation technicians,‎ pest control professionals,‎ and residential roofing and flooring contractors. Providing reliable and accurate measurements at a highly affordable price point,‎ the FLIR MR40 is a Quick and easy-to-use tool to find and quantify moisture problems. With its pen-like form factor,‎ the FLIR MR40 can be carried in a shirt pocket,‎ ready to work. Complete with meter, batteries, spare pin set and user's manual.

Manufacturer: Sonin Brand: Sonin Model: 50270 with bonus 50905

The Sonin Digital Moisture Meter 270 for WOOD measures moisture content in soft and hard woods from 2 to 70-Percent with 0.5-Percent resolution. PLUS Bonus Sonin GFI receptacle tester.

Manufacturer: SZXZB Brand: XZB Model: DX-108W

Display:4 digital LCD Measuring range: 0-84% Working Temperature: 0-60C Working Humidity: 5%-90% Resolusion: 0.1 Accuracy: ± 0.5%n Operation: Electrical Resistance Method, Automatic temperature Compensation Power supply: 4x1.5V AAA battery

Manufacturer: Red Lion Controls Inc Brand: Red Lion Model: CUB3

The CUB3T4 are designed to be used as hour, tenth hour, hundredth hour or tenth minute timers. The timing function on both models can be activated by either a contact closure or the application of 10 to 300 (AC 50/60 Hz or DC). Models are equipped with front panel remote reset. The CUB3T4 has the additional feature of a front panel reset. Time is displayed on a 6 digit LCD that will wrap around from a full display of "999999" to "000000" when an overflow occurs. An indicator, located in the upper lefthand corner of the display, will blink at 2 Hz whenever the timer is actuated. The front panel reset feature of the CUB3T4 allows the user to periodically measure elapsed time. Display: 6-digit, LCD, 0.2" high. -25 to +75 degree C operating temperature. -30 to 75 degree C storage temperature. Operating and storage humidity: 85 percent maximum RH (non-condensing) from -25 to +75 degree C. Altitude: up to 2000 meters. Construction: installation category II, pollution degree 2. Accuracy: 0.025 percent. CE approvals.

Manufacturer: Orbeco-Hellige Brand: Orbeco Hellige Model: L194800

The SD 50 pH Tester is ideal for field testing in environmental or industrial settings as well as for pool and spa testing! The robust housing is completely waterproof (IP67 rated!) and the intuitive scroll-bar functionality combined with a backlit display enable the easy measurement and simultaneous display.

Manufacturer: Delmhorst Brand: Delmhorst Model: TS-107

Used for penetrable solids. Ideal for hay and grain. TS-107, (3 1/2" long) is made of aluminum and delrin parts with a stainless steel tip. Requires SH-44 handle.

Manufacturer: Testo AG Brand: Testo Model: 0560 6060

Testo pocket pro moisture meter. Precise measurement of wood moisture automatically with characteristics curves for beech, spruce, larch, oak, pine, maple. Further characteristics curves for cement screed, concrete, plaster, anhydrite screed, cement mortar, brick. Hold function for easy readout of data. Backlit display. Self-test function. Protective cap for safe storage. Operating temperature: 14 to 122 degree F. Battery type: 2 AAA batteries. Battery life: 200 hours. Measures 4.5" length by 1.7" width by 1" height. Probe type Conductive measurement cell. Measuring range 0 to 50 percent . Accuracy: +/- 1 percent . Resolution: 0.1.