Moisture Meters - Page 42

Manufacturer: Greenlee Textron Brand: Greenlee Model: CMI-600

Greenlee AC True rms clamp meter is designed to measure AC currents, DC voltages, resistance and frequency. It includes digital low pass filter for precise readings on variable frequency drives. Clamp meter easily tests continuity and diodes. It can record average, maximum/minimum readings. Clamp meter comes with two voltage detection modes that is non-contact or single test lead. It has a two 1.5V AAA batteries, test leads and case for comfortable carrying. Clamp meter has AmpTip that provides increased accuracy on small wires carrying low currents. It gives precise measurements of the current up to 60600 Amps. Clamp meter has a 6000 count LCD display. It has a 1.18-Inch jaw opening. Clamp meter offers accurate measurements of voltage rating up to 600 VAC/DC. It easily holds data and gives exact measurements on the resistance range of 600, 6/60k Ohm. It offers correct measurements of frequency rating for voltage/AmpTip currents at 50/60 Hz and higher currents at 50 - 400 Hz. Clamp meter is UL listed.

Manufacturer: Agratronix Duracell Brand: Agratronix Duracell Model: 07100

DHT-1 Portable Digital Moisture Tester for hay by Agratronix with 18 inch hay probe. Includes: DHT-1 Hay Meter ; 18 inch hay probe. Agratronix 07100 Features: Direct readout for % moisture and temperature (F and C); Backlit LCD hay meter display for nighttime use; Sturdy pistol-grip handle with extra-rugged probe shaft made of aircraft aluminum; Accurate throughout the normal range of stored, baled hay; 18" hay probe 2 pack of 9v alkaline batteries included.

Manufacturer: Agratronix Brand: AgraTronix Model: HT-PRO

HT-PRO Portable Hay Moisture Tester with Calibration Clip and 10 in. Probe. Includes: Hay Moisture Meter; 10 Probe; HT-PRO Calibration Clip (07156).

Manufacturer: Agratronix Brand: AgraTronix Model: DHT-1

Includes: DHT-1 Hay Moisture Meter; 32 inch Probe.

Manufacturer: Protimeter Brand: Protimeter

The Protimeter Aquant is a non-invasive rapid test moisture meter for a wide range of building and construction materials. The right moisture meter makes all the difference when surveying, cleaning or restoring a property after water damage! The Protimeter BLD5765 Aquant is the sister product to the Surveymaster and helps you locate moisture quickly in a wide range of materials with the RF measurement system unique to Protimeter. This system allows you to detect moisture up to 3/4"(20mm) below and behind the surface in the most efficient way possible.

Manufacturer: Delmhorst Brand: Delmhorst Model: PROSCANW/CS

ProScan, the pin less moisture meter for woodworking applications can help woodworkers and craftsman know if wood is dry enough and ready to use for your project. This pin less moisture meter uses a harmless radio frequency to measure % moisture content in the wood quickly and easily.

Manufacturer: Emgreat Brand: Emgreat

Pin Definition VCC 5V GND GND DO Digital output interface (0 and 1) AO Analog output interface

Manufacturer: Sunkee Brand: SUNKEE Model: Soil Moisture Sensor

Pin Definition VCC 5V GND GND DO Digital output interface (0 and 1) AO Analog output interface

Manufacturer: BestDealUSA Brand: BestDealUSA Model: 40010075@@3

Low battery indication with Auto-Power Off function This moisture meter can detect the water composition of a wide range of materials such as wood, bamboo, cotton, tabacco, paper and etc. It has wide measuring range of 5% to 40% moisture level. It has 4 steel sharp probes or pins and is one of the most versatile Moisture meter in the market today. Because 4 pins probe can obtain more sampling amount than 2 pins from the material being tested, you'll get more reliable, more exact, more precise measurement results and more accurate data from this moisture meter. It measures from 5% to 40% of moisture level of the object being tested, which make it an essential tool for either amateur or professional surveyors, woodworkers and craftsmen. Truly an effective device to check dampness in buildings and enables building surveyors and other users to measure moisture levels of soft to medium density of wood materials such as bamboos, Cardboard and paper, Chipboard, Fibreboard, Foam, Peat, Plaster and Sand. Using this meter to check or measure moisture is the surest and quickest way to maintain safety in buildings and to help minimize moisture problems in lumber production, drying, and in all phases of furniture manufacturing, woodworking and building construction. Using the meter right can insure that wood will maintain dimensional stability and free from costly defects such as surface checks, splits, warping and delaminating. Specifications: * Moisture level range : 5% to 40% * Resolution : 1% * Accuracy: ±1% * Data hold (memory function) * Symbol and unit display for easy illustration of data * Power supply : 1 x 9V battery (Included) * Size : 129 x 63 x 32mm (5.08' x 2.48' x 1.26' inch) * Weight : 116g (Battery included) * 1x Digital Moisture Meter D814 * 1x 9V Battery * 1x sheet full instruction manual

Manufacturer: Sienoc Brand: SIENOC

Specification Model:RZMT-10 Moisture Measurement: 0 to 99.9% Resolution: 0.1% Accuracy: ± 0.5% Operating Ambient: -15°C~35°C, 20~90%RH Power: 9V battery (not including)* 1PCS Dimensions: 145*67*32(mm) Weight:138g Package Included 1x Digital Moisture Meter 1x User Manual