Temperature & Humidity - Page 177

Manufacturer: Sanrui Brand: Sanrui Color: White

Specifications: ● Display: Large 4-1/2 dual digital LCD display ● Sensor Type: A single chip relative humidity and temperature muti sensor module comprising a calibrated digital output. ● Response Time: %RH: 10S (90% at +25 °C still air) ● Accuracy Note: Accuracy is specified for the following ambient temperature range: 64°F to 82°F (18°C to 28°C) ● Sampling Rate: 2.5 samples per second ● Polarity: Automatic, (-) negative polarity indication ● Dewpoint Temperature: -20 °C~80 °C (-4 °F~176 °F) ● Wet Bulb Temperature: 0 °C~80 °C (32 °F~176 °F) ● Operating Conditions: 32°F to 104°F (0°C to 40°C); < 80% RH non-condensing. ● Storage Conditions: 14°F to 140°F (-10°C to 60°C); < 80% RH non-condensing. ● Power: One standard 9V, NEDA 1604 or 6F22 battery ● Dimensions: 175 x 58 x 35 mm ● Weight: 143g ● Humidity/ Temperature Measurement Range: ● ● Humidity: 0%~100%RH ● ● Temperature: -20 °C~80 °C (-4 °F~176 °F) ● ● Resolution: 0.01%RH, 0.01°C/0.01°F ● ● Humidity Accuracy: ±3%RH (at 25°C, 20%~80% RH); ±3.5%RH (At other ranges) ● ● Air Temperature Accuracy: ±0.5°C/±0.9°F (at 25°C); 0.8°C/±1.5°F (all other ranges) Package List: ● 1 x Digital Psychrometer with Dew Point & Wet Bulb ● 1 x 9V Battery ● 1 x User Manual

Manufacturer: Cole-Parmer Brand: Digi-Sense Model: AO-90000-37

This thermometer has two temperature sensors-a built-in air sensor and an independent external probe sensor with 3 1/2 foot cable. The external probe can be used to monitor temperatures of liquids, air/gas, and semisolids. Alarm configurations can be set up for four conditions: temperature above a setting, below a setting, between two settings, or outside two settings. A green or red light will Blink and an audible alarm will sound when one of these conditions is detected. The alarm will sound every minute for 5 seconds until the temperature returns to a non-alarm condition or until the alarm is turned off. What's included: mounting tape, probe suction cup, built-in flip open Bench stand, one AAA battery, and nist-traceable calibration report supplied by the manufacturer. Four different alarm configurations Jumbo digital display is easy to read from a distance remote, heat-resistant probe

Manufacturer: CNJW Brand: CNJW

This thermometer is for use in ships, pipelines and some heating or cooling facilities. It remains direct and accurate, and reliable and resistant to vibration. Our company combines traditional craft and advanced computer painting techniques, as well as permanent amble screen painting, making scale inerasable. Our V-shape thermometer has protective tubes enhance safety at the point where the thermometer is fixed to the facility, making it operate with at high pressures while being easily repairable.

Manufacturer: Winters Brand: Winters Instruments Model: TBM30090B12

A general purpose, versatile stainless steel 304 thermometer. Bi-metallic sensing element for reliable readings. Fixed centre back connection. Anti-parallax dial that reduces operator reading errors. 5 Year warranty. Welded stem. Application: industrial process, heating and air conditioning, ventilation and wastewater. Dial 3" aluminum with black markings, dish-shaped. Case: stainless steel 304 AISI. Recalibrator: standard. Ring: stainless steel 304 AISI. Sensing element: bi-metallic coil. Pointer: aluminum, painted black. Maximum operating pressure: 125 psi (861 kPa). Operating temperature: 75 percent of full scale value (recommended maximum). Ambient temperature: -58/248 degree fahrenheit. +/- 1 Percent accuracy. Enclosure rating IP68. Lens: Glass standard, hermetically sealed. Re-zero adjustment screws are standard on the 3" dial. Connection: 1/2" NPT standard. Temperature ranges: 150 degree F to 750 degree F and 100 degree C to 400 degree C. RoHS Compliant.

Manufacturer: Atmel Brand: Atmel

Capacitive Touch Sensors SQTouchADC for BSW Proximity Detection

Manufacturer: Omron Automation and Safety Brand: Omron Automation and Safety

Sensor Hardware & Accessories BRACKET E3S TYPE REPLACEMENT

Manufacturer: Winters Brand: Winters Instruments Model: TBM30040B6

A general purpose, versatile stainless steel 304 thermometer. Bi-metallic sensing element for reliable readings. Fixed centre back connection. Anti-parallax dial that reduces operator reading errors. 5 Year warranty. Welded stem. Application: industrial process, heating and air conditioning, ventilation and wastewater. Dial 3" aluminum with black markings, dish-shaped. Case: stainless steel 304 AISI. Recalibrator: standard. Ring: stainless steel 304 AISI. Sensing element: bi-metallic coil. Pointer: aluminum, painted black. Maximum operating pressure: 125 psi (861 kPa). Operating temperature: 75 percent of full scale value (recommended maximum). Ambient temperature: -58/248 degree fahrenheit. +/- 1 Percent accuracy. Enclosure rating IP68. Lens: Glass standard, hermetically sealed. Re-zero adjustment screws are standard on the 3" dial. Connection: 1/2" NPT standard. Temperature ranges: 0 degree F to 200 degree F and -20 degree C to 90 degree C. RoHS Compliant.

Manufacturer: Zhuhai Jida Huapu Instrument Co.,Ltd Brand: HoldPeak

Temperature Range -50¡æ¡«1300¡æ Accuracy ¡À2¡æ or ¡À2% Distance Spot Ratio 16:1 Emissivity 0.1¡«1.0Adjustable Flashlight HOLDPEAK is a registered trademark in the United States, any unauthorized use of our trademark is a violation of both Federal and State trademark laws and could subject to liability for damages and penalties. Your feedback is not only important to us but also beneficial to other customers, therefore we'd like to invite you to submit a review for the HOLDPEAK power supply!

Manufacturer: Sper Scientific Brand: Sper Scientific Model: 800061

Type K immersion and general purpose probe for digital thermocouple thermometers. .

Manufacturer: TAYLOR PRECISION PRODUCTS, LLC Brand: Taylor Precision Products Color: White

This Taylor® dial thermometer is weather proof and encased in aluminum. The combination device is a large 12" in diameter with black numbers and a red pointer and dial art to make the display easy to read. This Taylor® dial thermometer displays temperatures from -60°F to 120°F (-50°C to 50°C). The device has relative humidity range from 30% to 90%. This Taylor® dial thermometer is able to be easily mounted.