Temperature & Humidity - Page 35

Manufacturer: Cooper-Atkins Corporation Brand: Cooper Model: 470-0-8 Color: Multicolored

The Cooper-Atkins 470-0-8 mini digital dual-range infrared thermometer is used for noncontact temperature measurement when monitoring surface temperatures of food products and food service equipment. It measures temperature from -27 to +428 degrees F (-33 to +220 degrees C), with an accuracy of + or - 3.6 degrees F (+ or - 2 degrees C). It has a 1:1 infrared distance-to-spot ratio for measuring temperature. The Minimum/Maximum temperature memory function stores high and low readings, and it automatically holds a temperature reading for 15 seconds. The unit operates on a single CR2032 lithium battery, and turns off automatically after 15 seconds of non-use to conserve battery life. The European Conformity (CE) marking indicates compliance with applicable European Union (EU) directives, and it is compliant with Waste Electrical and Electronic Equipment (WEEE) and Restriction of Hazardous Substances (RoHS) standards. It comes with a lanyard and instructions.SpecificationsTemperature measurement range-27 to +428 degrees F (-33 to +220 degrees C)Resolution0.1 degree, 1 degree F above 200 degrees FAccuracy+ or - 3.6 degrees F (+ or - 2 degrees C)Response timeLess than 0.5 secondsEmissivityPreset at 0.95Standards metCE, RoHS, WEEEPower supplyCR2032 lithium batteryWeight1oz./18gDimensions2-11/16 x 1-7/16 x 3/4 inches (68 x 36.5 x 19mm) (H x W x D)H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Digital infrared thermometers measure the temperature of surfaces from a distance. They may measure temperature in Celsius, Fahrenheit, or both. Infrared (IR) thermometers work by focusing the infrared radiation emitted by a surface onto a detector called a thermopile. The thermopile turns the heat into electricity, which is measured and converted to a temperature reading. The reading is then displayed on an LCD display. IR thermometers are used to measure temperature when an object is fragile, as in e...

Manufacturer: WIKA Instrument Corporation Brand: WIKA Model: 33025D206G4

WIKA's industrial grade bimetal dial thermometer, TI.33 is an ideal choice where a weather-resistant, tamper-proof thermometer is needed. There is a 1 year warranty. Over Range: Temporary over or under range tolerance of 50 percent of scale up to 500 oF. (260 degree C). For ranges above 500 degree F, maximum over range is 800 degree F; continous. 1000 degree F intermittent. Connection: Material: 304 stainless steel enter back mount (CBM); 1/2" NPT connection. Stem Material: 304 stainless steel Diameter: 1/4" (6.35 mm). Measuring Element: Bi-metal helix. Dial: White aluminum, dished, with black. Case Material: 304 stainless steel Hermetically sealed Ingress protection IP 65. Pointer: Black aluminum. Standard Scales: Single: Fahrenheit or Celsius Dual: Fahrenheit (outer) and Celsius (inner). Window Gasket: Neoprene Silicone (-100 degree F and over 550 degree F). Window: Flat instrument glass. Dampening Inert gel to minimize pointer oscillation.

Manufacturer: Bel-Art Brand: SP Scienceware Model: B60380-0500

This H-B Instrument Easy-Read precision tank thermometer has a temperature range of 0 to 230°F. Each USA made Easy-Read thermometer is EnviroKleen certified environmentally safe non-toxic, non-hazardous, and biodegradable featuring Enviro-Safe liquid and recyclable Safety-Pak packaging. Enviro-Safe liquid has the same accuracy as similar mercury type thermometers, but cleans up easily with soap and water. Enviro-Safe liquid is dyed black against yellow back glass creating a high contrast, making this thermometer easy to read. Each item is individually serialized and comes with a brass cup case and a multi-language (English, French, German, Italian, Portuguese, and Spanish) Statement of Accuracy indicating accuracy traceable to NIST and DKD/PTB. Each item is tested and calibrated in an exclusive triple accredited/registered ISO/IEC 17025:2005 A2LA accredited laboratory against equipment whose calibration is traceable to NIST and DKD/PTB. Individually packaged. Range: 0 to 230°F. Divisions: 2°. Length: 405mm (16 Inches). Immersion length: 76mm (3 Inches). Accuracy: 1°F. Thermometer Fill Type: Enviro-Safe. Liquid Color: Black. Glass Type: Yellow Back. Cup Case: Brass. Traceable to NIST: Yes. Traceable to DKD/PTB: Yes. 6/Case. H-B Instrument #: 23744. Per Each. HB Instrument #: 23744.

Manufacturer: Comark Brand: Comark Model: SK42M

The Comark Instruments SK42M type-K thermocouple surface probe measures temperature from -58 to +482 degrees F (-50 to +250 degrees C), has a swiveling bell probe and a coiled lead. The probe bends at a 45-degree angle and has a flat sensor for surface contact. The probe handle is attached to a coiled lead that stretches to extend reach. Its sub-miniature connector attaches to a thermocouple kit or thermometer. This probe is designed for use in monitoring temperatures on grills and griddles.

Manufacturer: REOTEMP Instrument Brand: REOTEMP Model: AA0251F69

Reotemp back connected thermometer are ideal for local readings in most applications. All stainless steel welded construction. Easy to calibrate reset screw. Accuracy 1 percent full scale (ASME B40.3); hermetically sealed (ASME B40.3). Corrosion resistant to most chemicals. Standard glass lens. Standard connection thread: 1/2" NPT. Standard stem diameter: 1/4". Made in the USA.

Manufacturer: Thermco Brand: THERMCO

Thermco's ACCU-SAFE - Enclosed Chamber Thermometers are precise, reliable and an economical means of measuring critical temperatures in Blood Bank Refrigerators, Ultra-Low Freezers, Freezers, Refrigerators, Incubators, Ambient/Room, Block Heaters and Ovens. All thermometers have their own unique serial number and is supplied with a NIST (National Institute of Standards and Technology) certificate to indicate the traceability of each thermometer and the standard used in the certification testing. ACCU-SAFE Environmentally Friendly Thermometers are Spirit-Filled (Non-Mercury). Mercury model also available. Each thermometer is encapsulated in a PTEF flouropolymer safety-shield which absorbs shock, and will enclose the liquid and splintered glass within the coating should breakage occur. There by keeping contaminants from user and environment. ACCU-SAFE thermometers are housed in a unbreakable plastic bottle filled with a "NON-TOXIC" Bio-Safe insulating liquid. This medium is used to maintain the temperature to insure accurate temperature readings without being affected by opening and closing of chamber door. All Thermometers have thoroughly annealed glass and engraved stems for lasting accuracy in 0.1°C, 0.5°C and 1.0°C divisions to enhance the critical measurements demanded by today's regulatory agencies. Space Saving Magnets are supplied which can be adhered to the bottle allowing the thermometer to be attached to a steel wall or door. Block Heater thermometers are housed in a 1.5ml MICRO centrifuge tube with 1ml of USP white mineral oil.

Manufacturer: Bel-Art Brand: SP Scienceware Model: B60380-0400

This H-B Instrument Easy-Read precision tank thermometer has a temperature range of -10 to 70°C. Each USA made Easy-Read thermometer is EnviroKleen certified environmentally safe non-toxic, non-hazardous, and biodegradable featuring Enviro-Safe liquid and recyclable Safety-Pak packaging. Enviro-Safe liquid has the same accuracy as similar mercury type thermometers, but cleans up easily with soap and water. Enviro-Safe liquid is dyed black against yellow back glass creating a high contrast, making this thermometer easy to read. Each item is individually serialized and comes with a brass cup case and a multi-language (English, French, German, Italian, Portuguese, and Spanish) Statement of Accuracy indicating accuracy traceable to NIST and DKD/PTB. Each item is tested and calibrated in an exclusive triple accredited/registered ISO/IEC 17025:2005 A2LA accredited laboratory against equipment whose calibration is traceable to NIST and DKD/PTB. Individually packaged. Range: -10 to 70°C. Divisions: 0.5°. Length: 405mm (16 Inches). Immersion length: 76mm (3 Inches). Accuracy: 0.25°C. Thermometer Fill Type: Enviro-Safe. Liquid Color: Black. Glass Type: Yellow Back. Cup Case: Brass. Traceable to NIST: Yes. Traceable to DKD/PTB: Yes. 6/Case. H-B Instrument #: 23743. Per Each. HB Instrument #: 23743.

Manufacturer: Winters Brand: Winters Instruments Model: TBM20025B8

A general purpose, versatile stainless steel 304 thermometer. Bi-metallic sensing element for reliable readings. Fixed centre back connection. Anti-parallax dial that reduces operator reading errors. 5 Year warranty. Welded stem. Application: industrial process, heating and air conditioning, ventilation and wastewater. Dial 2" aluminum with black markings, dish-shaped. Case: stainless steel 304 AISI. Recalibrator: standard. Ring: stainless steel 304 AISI. Sensing element: bi-metallic coil. Pointer: aluminum, painted black. Maximum operating pressure: 125 psi (861 kPa). Operating temperature: 75 percent of full scale value (recommended maximum). Ambient temperature: -58/248 degree fahrenheit. +/- 1 Percent accuracy. Enclosure rating IP68. Lens: Glass standard, hermetically sealed. Re-zero adjustment screws are standard on the 2" dial. Connection: 1/4" NPT standard. Temperature ranges: 0 degree F to 250 degree F and -20 degree C to 120 degree C. RoHS Compliant.

Manufacturer: Extech Instruments Brand: Extech Model: 42510

EXTECH INSTRUMENTS 42510 MINI INFRARED THERMOMETER, -50°C - 538°C

Manufacturer: WIKA Instrument Corporation Brand: WIKA Model: 75TH2T045CC

Application Thermowells for temperature instruments are recommended for all process systems where pressure, velocity or viscous, abrasive and corrosive materials are present individually or in combination. A properly selected thermowell will protect the temperature instrument from possible damage resulting from these process variables. Furthermore, a thermowell permits removal of the temperature instrument for replacement, repair or testing without effecting the process media or the system. Process Connection: External means to connect thermowell to process piping system. Wells can be threaded, bolted (to matching flange), clamped or welded in place. Bore Diameter: Dimension of internal bore to match the diameter of the instrument stem/bulb inserted into the well. The 0.260" sizes fit instrument stem/bulb diameters of 1/4" and 3/8" respectively. Bore length equals "S" dimension. Tapered Shank: Shank O.D. is gradually reduced from the root diameter to the tip diameter. Available with a .260" bore size. The tapered shank is recommended for heavy duty applications characterized by high vibration, pressure, temperature and/or velocity.