Temperature & Humidity - Page 357

Manufacturer: The Sensor Connection Brand: The Sensor Connection

These high temperature sensors are the choice for professional racing teams, R&D test labs, and enthusiasts. The EGT probes can be used for many different applications, including... but not limited to... Karts, Drag Racing, Formula 1, NASCAR, Off Road, Snowmobiles, Aviation, and Marine Racing.The Exhaust Gas Temperature Probe is capable of surviving extreme vibration and heat up to 2300 degrees F (1300 degrees C). The EGT probe will fit most internal combustion engine exhaust systems from approximately .750 inch diameter up to about 4 inch diameter with nominal installation modifications. The EGT probe is 0.125 diameter with a 90-degree bend to accommodate tight mounting locations. An adjustable (316 Stainless Steel) 1/8 NPT compression fitting adapter is included. All of our EGT probes are handmade in the USA.

Manufacturer: COLE-PARMER Brand: Digi-Sense

Take fast and accurate temperature measurements anywhere - tapered 304 stainless steel probe can be used in solids, semisolids, liquids and gases. Large, backlit display provides great visibility. Fold up 4.5"L (114mm) probe adjusts from 0 to 180° for best measurement and viewing angle. Features include °F/°C unit selection, data hold, min/max functions, and auto shut-off after 4 minutes of non-use to conserve battery life. Plus, the NIST-traceable precalibration means you get reliable measurements right out of the box, saving you time and money! What's Included: two AAA battery and NIST-traceable calibration report with data supplied by InnoCal. Rugged, IP-67 rated waterproof case cleans easily under running water Reliable measurements, guaranteed! Precalibrated to NIST-traceable standards Hinged design allows probe to fold away and fit into your pocket Narrow probe tip for quicker response time HACCP compliant for food applications

Manufacturer: Arco Electronics Limited Brand: Smart Sensor Model: AR8800A+ Color: Red with Yellow

• Detection of gas: Combustible Gas• The principle of sensor: Semi-conductor type• Measuring indication: LED indication• Resolution: 100PPM• Warm up time:

Manufacturer: Miljoco Brand: Miljoco Model: B3098A54-6

3" Bimetal thermometer, polycarbonate lens, 1/2 NPT CBM, adjustable-angle 6" stem, 0 to 250°F/C, 300 series stainless steel case, ring and stem.

Manufacturer: COLE-PARMER Brand: Digi-Sense

Note: the temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C). Warning: This product is not approved or intended for, and should not be used for medical, clinical, surgical or other patient oriented applications. Hypodermic Tip Penetration Probes Are Designed For Soft and Semi-Soft Materials Ideal For Checking Food Temperatures Response Time: 1.2 seconds or greater Probe comes with Stainles Steel Handle Each probe comes with color coded ANSI miniconnectors: type J-black, type K-yellow, and type T-blue. Custom designs or changes to this product are available upon request

Manufacturer: Thermco Brand: THERMCO

Clock, Date & Weekday & Thermometer 0/40C & 32/104F

Manufacturer: TMD Shop Brand: TMD Shop

brand name:oemmodel number:infrared thermometerusage:indoortheory:infrared thermometercolor:yellowdisplay:lcd backlightresponse time:

Manufacturer: KEMET NEC-Tokin Brand: KEMET NEC TOKIN

Board Mount Temperature Sensors SensThermOHD3 120C 6W Make

Manufacturer: KEMET NEC-Tokin Brand: KEMET NEC TOKIN

Board Mount Temperature Sensors SensThermOHD3 45C 6W Make

Manufacturer: Fluke Corporation Brand: Fluke Model: GEO EARTH STAKE

The Fluke GEO earth stake is used with Fluke 1623 and 1625 earth ground testers to measure the ability of the earth ground system or individual electrode to dissipate energy from the site. The auxiliary stake is used in 2-pole, 3-pole, and 4-pole fall of potential testing, and 3-pole and 4-pole selective testing with current clamp. The stake has a corkscrew end to bore into the ground. The Fluke GEO earth stake is an accessory included in Fluke 1623 and 1625 meter kits. Fluke Corporation manufactures electrical testing tools and software for industrial and commercial applications. The company, founded in 1948, is headquartered in Everett, WA.