|
|
-
4.1 of 5.0 with 41 Reviews
SALE PRICE: $69.55 1% OFF
Manufacturer: Thomas Scientific
Brand: Thomas
Model: 4373
Manufacturer: Thomas Scientific
Brand: Thomas
Model: 4373
|
The Thomas Traceable 10 Memory Thermometer is used for monitoring the temperature in liquids, semisolids, and gases. The thermometer measures temperature from -50 to 300 degrees C (-58 to 572 degrees F), with an accuracy of + or -1 degree C between -20 and 100 degrees C. The thermometer has a 7.5" long stainless steel probe with a diameter of 0.25" that is impervious to most chemicals. The probe is attached to the thermometer by a 22" long cable. The thermometer memory stores up to 10 minimum/maximum values and has a temperature alarm that can be programmed to indicate audibly when the temperature exceeds a maximum or minimum value. An automatic cutoff function turns the unit off after one hour of inactivity to conserve power. This function can be turned off by the user. The LCD display has 0.5" high digits for visibility from up to 10 ft. away. The thermometer is traceable to National Institute of Standards and Technology standards, indicating that it is calibrated to International Organization for Standardization (ISO) 17025 levels. The Thomas Thermometer is used in food storage, scientific laboratories, and other industries that require temperature monitoring.SpecificationsPower source(1) G-13 silver-oxide batteryTemperature range-50 to 300 degrees C (-58 to 572 degrees F)Accuracy+ or - 1 degree C between -20 and 100 degrees CResolution0.1 degree C/0.1 degree FStandard metInternational Organization for Standardization (ISO) 17025Probe length7.5"Cable length22"Weight4 oz.Dimensions (H x W x D)4.63 x 2.88 x 1 inchesH is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Digital thermometers are instruments used to measure the temperature of air, liquids, or surfaces electronically. They may measure temperature in Celsius, Fahrenheit, or both. Most digital thermometers use thermistors, which are small electronic resistors. Thermistors are made out of metals that conduct electricity within a cert...
-
4.1 of 5.0 with 6 Reviews
SALE PRICE: $69.95
Manufacturer: BUILDERA
Brand: Buildera
Model: BUILDERA CRACKMON® 3D Model 2412-ECSS
Manufacturer: BUILDERA
Brand: Buildera
Model: BUILDERA CRACKMON® 3D Model 2412-ECSS
|
The new CRACKMON® 3D in corrosion-resistant stainless steel is a proprietary, industrial-grade crack monitor gauge to measure horizontal (X), vertical (Y) and depth (Z) crack displacement on inside corners in foundations, concrete, masonry, stucco, wood and metal surfaces. Most other crack monitors or crack meters measure in only one or two dimensions, but not all three. The CRACKMON 3DTM is ideal for foundation and basement restoration, seismic retrofitting, or any structural, geotechnical or civil engineering project that requires ongoing monitoring of structural defects and cracks. The CRACKMON 3DTM is indispensable for structural and civil engineers, building contractors, trades professionals, commercial property owners, building inspectors, or homeowners. Each CRACKMON 3DTM is manufactured in the USA to exacting standards using state-of-the-art precision laser cutters. Durable type 304 stainless steel with laser-etched markings provide permanent readability even in harsh outdoor environments. Included with each kit: - One (1) individually packaged CRACKMON 3DTM in Type 304 SS (USA) - CRACKMON® and CRACKMON 3DTM are trademarks of Builders Websource. Beware of inferior or imitation products. If it doesn't say CRACKMON®, it's not genuine.
-
4.1 of 5.0 with 6 Reviews
SALE PRICE: $69.95
Manufacturer: Standard Plumbing Supply
Brand: Robertshaw
Model: ETC-112000-000
Manufacturer: Standard Plumbing Supply
Brand: Robertshaw
Model: ETC-112000-000
|
The Ranco ETC is a microprocessor-based family of temperature controls designed to provide on/off control for commercial heating, cooling, air conditioning and refrigeration applications. With its wide temperature range, one and two stage capability, selectable heating/cooling modes and multi-voltage input, the ETC is one of the most versatile temperature controls available. Unlike many electronic controls, the ETC is simple to install and set up. One finger is all you need to program it. The standard digital display and keypad allow the user to adjust the temperature settings with 1 Degree resolution. Setpoint temperature, differential and mode of operation (heating or cooling) can all be selected using the keypad and display. When not in the programming mode, the display gives a constant readout of the sensor temperature. Annunciators on the liquid crystal display also indicate when the relay is energized. The ETC line includes both one and two stage models. On two stage controls, each stage can be set independently thus eliminating the bothersome task of calculating interstage temperatures. And two stage models can be set up with overlapping heating or cooling stages. The ETC is capable of remote temperature sensing up to 400 feet away from the control when using standard 22 gauge sensor wire. Every ETC model is equipped with diagnostic programs that check for hardware, software or system problems and display different error codes to indicate where the trouble is. The ETC also has a keypad lockout switch to prevent tampering with the control settings by unauthorized personnel. The ETC display temperature may not be calibrated in the field.
-
4.1 of 5.0 with 31 Reviews
SALE PRICE: $69.97 1% OFF
Manufacturer: US Sensor
Brand: US Sensor
Manufacturer: US Sensor
Brand: US Sensor
Industrial Temperature Sensors Resistance Temperature Detector, 500 ohm RTD Sensor
-
4.1 of 5.0 with 31 Reviews
SALE PRICE: $70.89
Manufacturer: Thermo Scientific
Brand: Oakton
Model: WD-08512-95
Manufacturer: Thermo Scientific
Brand: Oakton
Model: WD-08512-95
-
4.1 of 5.0 with 35 Reviews
SALE PRICE: $72.00 1% OFF
Manufacturer: Dwyer
Brand: Dwyer
Manufacturer: Dwyer
Brand: Dwyer
Min/Max Dial Thermometer, Bimetal, Dial Size 3 In., Connection Size 1/2 In. NPT, Connection Location Back, Stem Length 4 In., Temp. Range (F) 50 Degrees to 300 Degrees , Temp. Range (C) 10 Degrees to 150 Degrees , Accuracy +/-1 Percent, Stem Dia. 1/2 In.Case Hermetically Sealed, Case Material Stainless Steel, Stem Material Stainless Steel, Window Material GlassManufacturers Warranty Length 1 yr. Min./Max. Dial Bimetal ThermometersHermetically sealed, 3"-dial thermometers feature 2 hands to track min./max. temperature.Accuracy: 1% Connection size: 1/2" NPT Back connection 1/2" dia. stem Stainless steel construction Glass window
-
4.1 of 5.0 with 26 Reviews
SALE PRICE: $72.10
Manufacturer: Thermco
Brand: THERMCO
Manufacturer: Thermco
Brand: THERMCO
TYPE K SURFACE PROBE W/HANDLE
-
4.1 of 5.0 with 6 Reviews
SALE PRICE: $72.76 9% OFF
Manufacturer: UEi Test Instruments
Brand: UEi Test Instruments
Model: DTH35
Color: Multicolored
Manufacturer: UEi Test Instruments
Brand: UEi Test Instruments
Model: DTH35
Color: Multicolored
The DTH35 was designed to provide professionals with an easy way to measure temperature and humidity. Packed with useful features, the DTH35 includes a triple display to show three readings simultaneously. Use the DTH35 when charging air-conditioning systems or for similar HVAC/r applications. Measures temperature in degrees F and c, relative humidity (rh) from 0% to 100% dewpoint, wet bulb, and temperature and includes Min/Max, data hold, auto power off and a protective sensor cap.
-
4.1 of 5.0 with 41 Reviews
SALE PRICE: $72.85 1% OFF
Manufacturer: NEWPORT ELECTRONICS
Brand: Newport Electronics
Manufacturer: NEWPORT ELECTRONICS
Brand: Newport Electronics
NEWPORT ELECTRONICS 5TC-TT-K36-36 THERMOCOUPLE WIRE, TYPE K, 36AWG, 36"L, PK5
-
4.1 of 5.0 with 11 Reviews
SALE PRICE: $73.00
Brand: Taylor
Color: Black
Brand: Taylor
Color: Black
This Taylor® infrared thermometer does not need to come in contact with the object being measured to prevent cross contamination. The device has an auto off feature and is able to lock the displayed temperature on the screen. This Taylor® infrared thermometer is 1 1/2" x 4 1/2" x 1" (L x W x H). The device comes included with a protective rubber casing and a lithium battery. This Taylor® infrared thermometer displays temperature ranges from -67° to 428°F (-55° to 220°C).
|
|