Temperature & Humidity - Page 409

Manufacturer: NETCNA Brand: NETCNA

Use the Armasight 8x Lens for Nyx-7 Pro Night Vision Devices to increase optical magnification of your Nyx-7 Pro Night Vision Devices to 8x for long-range observations. The lens also features a tethered lens cap.

Manufacturer: Fluke Brand: Fluke Model: 5609-20-S

Fluke 5609-20-S Probe, Secondary PRT, 100 OHM (1/4 X 20 INCH). If you want a very stable thermometer from -200 °C to 670 °C and are particular about the calibration, then look no further than our 5609 Secondary Reference PRT. Its short-term stability at the triple point of water is only ± 7 mK and its one-quarter inch (6.23mm) diameter lets you get accurate measurements in only 100 mm of immersion. The 5608 is also a ± 7 mK probe at the triple point of water, but its one-eighth inch (3.18 mm) diameter gets you accurate measurements from -200 °C to 500 °C with only 80mm (3.1 in) of immersion. With multiple sheath length options on both of these probes, you can find the dimensions that are just right for your specific application. The 5608 comes with a one-eighth inch (3.18 mm) diameter sheath in lengths of 9 inches or 12 inches. The 5609 comes with a one-quarter inch (6.35 mm) diameter sheath in lengths of 12 inches, 15 inches, and 20 inches; or with a 6 mm diameter in lengths of 300 mm, 400 mm, or 500 mm. When looking for improved response time and reduced stem effect in shallow immersion, look for small diameter probes, because the measurement error called stem effect is caused by the diameter of the stem rather than the length of the stem. Both of these probes have InconelTM sheaths and are made using a special manufacturing process, giving them great precision over a wide temperature range. The sensors for these probes are reference-grade platinum and feature four-wire connections with less noisy measurements than two-wire counterparts. These probes come with a certificate of compliance to ensure the meet their specifications. If you'd like, you can also order a NVLAP-accredited calibration from our laboratory, lab code 200348-0. On the report of calibration, you'll get the test data and the ITS90 calibration coefficients that you can easily input into any Fluke Calibration thermometer

Manufacturer: Fluke Brand: Fluke Model: 5609-500-S

Fluke 5609-500-S Probe, Secondary PRT, 100 OHM (6 X 500 MM). If you want a very stable thermometer from -200 °C to 670 °C and are particular about the calibration, then look no further than our 5609 Secondary Reference PRT. Its short-term stability at the triple point of water is only ± 7 mK and its one-quarter inch (6.23mm) diameter lets you get accurate measurements in only 100 mm of immersion. The 5608 is also a ± 7 mK probe at the triple point of water, but its one-eighth inch (3.18 mm) diameter gets you accurate measurements from -200 °C to 500 °C with only 80mm (3.1 in) of immersion. With multiple sheath length options on both of these probes, you can find the dimensions that are just right for your specific application. The 5608 comes with a one-eighth inch (3.18 mm) diameter sheath in lengths of 9 inches or 12 inches. The 5609 comes with a one-quarter inch (6.35 mm) diameter sheath in lengths of 12 inches, 15 inches, and 20 inches; or with a 6 mm diameter in lengths of 300 mm, 400 mm, or 500 mm. When looking for improved response time and reduced stem effect in shallow immersion, look for small diameter probes, because the measurement error called stem effect is caused by the diameter of the stem rather than the length of the stem. Both of these probes have InconelTM sheaths and are made using a special manufacturing process, giving them great precision over a wide temperature range. The sensors for these probes are reference-grade platinum and feature four-wire connections with less noisy measurements than two-wire counterparts. These probes come with a certificate of compliance to ensure the meet their specifications. If you'd like, you can also order a NVLAP-accredited calibration from our laboratory, lab code 200348-0. On the report of calibration, you'll get the test data and the ITS90 calibration coefficients that you can easily input into any Fluke Calibration thermometer

Manufacturer: HT Instruments Brand: HT Instruments

MacrotestG3 custom for you (ground resistance, continuity 200mA)

Manufacturer: HT Instruments Brand: HT Instruments

HT Instruments HT78 Leakage Clamp Meter with Low Pass Filter The innovative HT78 clamp is a meter for accurate measurement of very low AC TRMS current values (from 0.1mA) and it's ok for leakage current measurements in civil and industrial electrical installations to solve typical problem of RCDs accidentally tripping. The integrated low pass filter permits the cut of high order harmonics and the analogical DCV output permits a connection with external data loggers. The meter permits to measure up to 3000A and, thanks to large jaws, clamp cables and/or bars of wide sizes. The meter is compliance to IEC/EN61010-1 safety standard in CAT II 600V, CAT III 300V.

Manufacturer: NETCNA Brand: NETCNA

The 50mm Lens for OTS-X Thermal Monocular from ATN is an accessory optic for the OTS-X handheld thermal imaging device. An interchangeable lens mount system enables this lens to be connected to any configuration of the OTS-X monocular. The 50mm lens transmits a 14° angle of view on a 640x480 monocular, or a 7° angle of view on one of the 320x240 configurations.

Manufacturer: HT Instruments Brand: HT Instruments

Accessory for high resolution Loop/Line Impedance.

Manufacturer: HT Instruments Brand: HT Instruments

HT Instruments EQUITEST 5071 Instrument for Continuity 10A and Line/Loop Test Multifunction installation tester for continuity of earth conductor with 10A and Line/Loop impedance. The multifunction installation tester EQUITEST5071 model is principally designed to perform the safety verifies of earth equipotential conductors with test current > 10A in compliance with IEC/EN61557, VDE100 and IEC/EN60204-1:2006 guidelines (medical rooms and safety of electrical machines). The instrument performs even continuity measurements with 200mA, Line/Loop impedance also with high resolution (0.1mOhm - with IMP57 optional accessory), global earth resistance without RCDs tripping and phase sequence indication. Each test can be saved inside the internal memory and downloaded to PC by using supplied Windows software.

Manufacturer: FLIR Systems Brand: FLIR Systems, Inc. Model: FLIR i7 Color: Blue/Gray

The Extech FLIR i7 thermal camera is designed to comply with proposed RESNET standards at an affordable price. JPEG format allows both analysis and sharing. Each image can be analyzed using included QuickReport PC software. It's the perfect tool for weatherization agencies, energy auditors and restoration contractors. Use the FLIR i7 Compact Infrared Thermal Imaging Camera to detect problems before they become crises. The FLIR i7 is one of the smallest, lightest, and most powerful thermal cameras on the market. This powerful, non-invasive monitoring and diagnostic tool features intuitive one-handed operation, a 2.8-inch LCD color screen, precise thermal sensitivity, a rechargeable lithium-ion battery, and a storage capacity of up to 5,000 images. The included QuickReport software makes sharing and analysis of radiometric images a quick and easy.i7 Compact IR CameraAt a Glance:Detect hidden problems and make quick damage assessmentsLarge, 2.8-inch LCD color screen with 120 by 120 pixel thermal resolutionStore up to 5,000 images on camera's microSD cardRugged body with intuitive, one-handed operation meets IP43 standardsQuickReport software analyzes images, prepares reports, and adjusts image settingsTwo-year warranty on parts and laborProvides powerful non-invasive monitoring to detect hidden problems. View larger.Analyze images and generate temperature report using QuickReport software.View larger.Find Problems, Evaluate Work, and Schedule RepairsImproperly functioning equipment can be dangerous or lead to lost productivity if not detected soon enough. Infrared inspection with the FLIR i7 will reveal minor variations in temperature that can signal electrical and mechanical failures, leaky air ducts, missing insulation, and moisture problems. Inspect motors, transformers, circuit breakers, pumps, heating and cooling systems, new equipment installations, and repairs by contractors.Roof and house inspectors, energy auditors, and asphalt-paving companies can rely on thermal cameras to ensure and report on quality job...

Manufacturer: FLIR Systems, Inc. Brand: FLIR Systems, Inc. Model: K33 Color: Black