Anemometers - Page 6

Manufacturer: Fluke Corporation Brand: Fluke Model: I30S

The i30s current clamp is based on hall effect technology for use in measurement of both DC and AC current. The i30s may be used in conjunction with oscilloscopes and other suitable recording instruments for accurate non-intrusive current measurement. Specified current range: 30 mA to 30A DC, 30 mA to 20 A AC rms. Usable current range: 5 mA to 30 A DC, 30 mA to 20 A AC rms. Crest factor: 1.4". Output sensitivity: 100 mV/A. Accuracy (at +25 degree C): +/-1 percent of reading +/-2 mA. Resolution: +/-1 mA. Load impedance: greater than 100 kilo ohm. Conductor position sensitivity: +/-1 percent relative to center reading. Frequency range: DC to 100 kHz (- 0.5 dB). Phase shift below 1 kHz: less than 2 degrees. Temperature coefficient: +/-0.01 percent of reading/degree C. Power supply: 9 V Alkaline, MN1604/PP3, 30 hours, low battery indicator. Working voltage (see Safety Standards section): 300 V AC rms or DC. Maximum conductor size: 19mm diameter. Output connection: Safety BNC connector, supplied with safety 4mm adapter. Output zero: Manual adjust via thumbwheel. Cable length: 2 meters. Operating temperature range: 0 to +50 degree C. Storage temperature range (with battery removed): -20 to +85 degree C. Operating humidity: 15 to 85 percent (non-condensing). Safety standards: BS EN 61010-1: 2001, BS EN 61010-2-032: 2002, BS EN 61010-031: 2002, 300 Vrms, Category III, Pollution Degree 2, Use of the probe on uninsulated conductors is limited to 300 V AC RMS or dc and frequencies below 1 kHz. EMC Standards: EN 61326: 1998 +A1, A2, and A3. Measures 71mm width by 183mm height by 25mm depth.

Manufacturer: NK Kestrel Brand: Kestrel Model: 0857ATAN

Get the "science of accuracy" with Applied Ballistics! Accessing the full capabilities of the Applied Ballistics Elite solver delivers proven elevation and windage solutions for extended long-range shots with unprecedented accuracy.

Manufacturer: Fluke Brand: Fluke Model: 4550041

Fluke 820 LED Stroboscope.

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-1587 MDT

The Fluke 1587 MDT advanced insulation and motor drive troubleshooting kit is designed for troubleshooting and preventive maintenance applications including three-phase motors, cables, switch gear, and in applications where testing is required without the need to break the circuit. The kit includes the Fluke 1587 digital insulation multimeter, Fluke i400 current clamp, and Fluke 9040 phase rotation indicator. The Fluke 1587 digital insulation multimeter (also known as a multitester) is a true RMS, auto- and manual-ranging meter insulation resistance, current, voltage, and resistance for testing line insulation in telecommunications applications. The insulation test voltage settings of 50V, 100V measure resistance from 0.01 to 100 megohms. The meter also measures capacitance, frequency, and resistance. Temperature is measured using a K-type thermocouple (included). A diode test detects correct functioning of a circuit's diodes. A low-pass filter provides accurate AC voltage and AC frequency measurements on inverters and variable-frequency motor drives by blocking unwanted voltages. Live circuit detection increases user safety by preventing insulation tests when voltages exceed 30V, and auto-discharge of capacitive voltage increases user protection. An audible continuity sensor confirms a circuit conducts electricity. The LCD is backlit for readability in low light. A hold function freezes the reading on the display. An alarm sounds when the test leads are connected to the wrong jack for the measurement being taken. The unit automatically turns off after 20 minutes of nonuse to conserve battery life or can be disabled for extended readings, and a low-battery indicator signals when the meter's batteries need to be replaced. The meter included a set of detachable test leads, a remote probe, alligator clips, a hard case, and instructions. This true RMS (root mean square) insulation multimeter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the c...

Manufacturer: Fluke Corporation Brand: Fluke Model: FLUKE-985

The new Fluke 985 Particle Counter is the preferred choice for HVAC and IAQ professionals. From filter testing to IAQ investigations, the Fluke 985 is the portable solution for determining airborne particle concentrations. Use the Fluke 985 to immediately respond to occupant complaints, or as part of a comprehensive preventive maintenance program. Drive additional business by demonstrating the need for maintenance and repair. With a large screen, intuitive icons for navigation and on-screen data presentation, the Fluke 985 allows users to run more tests quickly, with less time spent cycling through screens to obtain the data. The Fluke 985 is lightweight and easy to use in any position and with easy data export options using USB cable, memory stick. it's easy to review and analyze the data anywhere and anytime. Assess air quality more easily and accurately. Six channels and particle size range of 0.3 - 10.0 micron: Assures accurate measurements even for critical locations requiring ISO Class 5 - 9 certification. Ultra-lightweight and ergonomic design: Promises easy single-hand operation in tight or awkward spaces with less operator fatigue. Long battery life: Ten hours of standard-use battery life to last a full work day. Large 3.5 QVGC Color display: Easy navigation and viewing with the intuitive icons and large font options. 10,000 record storage: Quick access to historical data. On-screen data presentation: Data can be viewed in a traditional tabular or trend graph view at the user's preference. Personalized setting and configurations: Customizable settings for the display, sample methods, and alarm settings for sample count. Data export options: Download data to a PC using a USB memory stick, USB cable or Ethernet connection. No special software is required to download or view data.

Manufacturer: Fluke Corporation Brand: Fluke Model: 203414

Digital multimeter fast acting replacement fuse. Nominal current: 440mA. Maximum voltage to ground: 1000V.

Manufacturer: Fluke Corporation Brand: Fluke Model: BP-7240

Li-Ion battery pack for the 75x documenting process calibrator.

Manufacturer: Besantek Brand: Besantek

The BESANTEK BST-AFM06 CFM/CMM Anemometer , Humidity Meter, Light Meter, Type K Thermometer Designed to Measure Air Velocity, Air Flow, Light, Humidity,Temperature and Chill Temperature as Practical Handheld. BST-AFM05 has been Applied to HVAC, Paint / Facilities Maintenance, Environmental Laboratories, etc. Air ow ( CFM. CMM ) measurement can set thedesired area dimension.. 2Multi channel display for relative humidity and temperature measured values or air velocity and temperature measured values at the same time.. Zero button design makes light meter calibration.Hold function to freeze the current reading value.

Manufacturer: Fluke Corporation Brand: Fluke Model: HART DRYWELL CABLE

Fluke HART DRYWELL CABLE Cable Kit, Hart Drywell Control

Manufacturer: StandardPlumbing: Kohler Brand: UEI Test Equipment Model: DAFM4

0.7 inch diameter vane head with 39 inch long telescopic & scale marked probe - mini vane probe with built-in temperature & rh sensor - up to 1 hour accumulative average - metric & Imperial scales - handheld size, easy to carry - in-duct or grill surface measurements - low battery indication - fast, accurate response.