|
|
-
4.2 of 5.0 with 18 Reviews
SALE PRICE: $359.99 11% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: 709H/TRACK
Manufacturer: Fluke Corporation
Brand: Fluke
Model: 709H/TRACK
|
Fluke Corporation introduces the Fluke 709H Precision Current Loop Calibrator with HART Communications, an affordable, easy-to-use tool with a user-friendly interface and HART capabilities that reduces the time it takes to measure or source, voltage or current, and power up a loop. With its best-in-class accuracy at 0.01 percent reading, the Fluke 709H is ideal for process technicians who need a precise loop calibrator and powerful HART communicator in one compact, rugged, reliable tool. The Fluke 709H supports a select set of HART universal and common practice commands. In the communicator mode, technicians can read basic device information, perform diagnostic tests, and trim the calibration on most HART-enabled transmitters. In the past, this could only be done with a dedicated communicator, a high-end multifunction calibrator, or a laptop computer with a HART modem. It also features a built-in, selectable 250-ohm resistor to tune the loop for HART communications. The 709H and non-HART 709 models feature an intuitive interface with dedicated buttons, a Quick-Set rotary encoder knob, and simple two wire connection for quick, easy measurements. The dedicated 0-100 percent span and 25 percent step buttons make for quick and easy testing. Ramping and auto-stepping enables technicians to perform tests remotely and be in “two places at once.†The optional 709H/TRACK software with communication cable can document milliamp measurements and HART transmitter parameters and upload to a PC.
-
4.2 of 5.0 with 38 Reviews
SALE PRICE: $359.99 11% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: FLUKE-700-IV
Manufacturer: Fluke Corporation
Brand: Fluke
Model: FLUKE-700-IV
4-20mA Current shunt. Very accurate current shunt to use for verification and calibration of process control loops. Can be used with accurate voltmeters for calibration purposes. Can be used with Fluke 74X series in mA/mA applications (74X will display mA/mA automatically). 1 year warranty.
-
4.2 of 5.0 with 14 Reviews
SALE PRICE: $370.36 1% OFF
Manufacturer: UEI Test Instruments
Brand: UEi Test Instruments
Model: 13910
Manufacturer: UEI Test Instruments
Brand: UEi Test Instruments
Model: 13910
Measures: O2 and CO - Calculates: CO2, efficiency and excess air - Large 4 line display - Long life rechargeable battery.
-
4.2 of 5.0 with 7 Reviews
SALE PRICE: $382.49 11% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: I1010
Manufacturer: Fluke Corporation
Brand: Fluke
Model: I1010
|
The Fluke i1010 AC/DC current clamp is designed to extend the current ranges of Fluke tools and can take current readings without breaking the circuit. Battery-powered dual Hall-effect, clamp-on probe measures dc current from 1-1000A; AC current from 1-600A AC rms. Measures AC and DC current down to 1 amp with specified accuracy and is useable to 0.5A. Output is 1 mV per amp DC or AC. Jaws accept conductor size of 1 X 750 MCM ( 30 mm/1.18 in. diameter) or 2 x 500 MCM (2 x 25 mm/0.98"). AC and DC accuracy: +/- (2.0 percent of reading + 0.5A). Measurement type: Hall sensor. Nominal current range: 600 A AC, 1000 A DC. Continuous current range: 1 A - 600 A AC, 1 A - 1000 A DC. Maximum non-destructive current: 1000 A. Lowest measurable current: 0.5 A. Useable frequency: DC - 10 kHz. Output levels: 1 mV/A. With zero error adjustment. Safety: CAT III, 600 V. Maximum voltage: 600 V. Battery life: 9 V, 60 h. Maximum conductor diameter: 30mm, 2 x 25mm. Output cable length: 1.6m. With shrouded banana plugs.
-
4.2 of 5.0 with 7 Reviews
SALE PRICE: $382.49 6% OFF
Manufacturer: Fluke Corporation
Brand: Fluke
Model: I1010-KIT
Manufacturer: Fluke Corporation
Brand: Fluke
Model: I1010-KIT
|
Kit included i1010 1-600A AC rms, 1-1000A DC current clamp, zippered vinyl carry case with moveable divider. Special value kit for electrical professional who is looking to add on DC and AC current measurement capabilities to their DMM. Includes a roomy carry case to hold and protect your meter and current clamp, plus extra storage for your test leads, probes and manuals. The Fluke i1010 AC/DC current clamp is designed to extend the current ranges of Fluke tools and can take current readings without breaking the circuit. Battery-powered dual Hall-effect, clamp-on probe measures dc current from 1-1000A; AC current from 1-600A AC rms. Measures AC and DC current down to 1 amp with specified accuracy and is useable to 0.5A. Output is 1 mV per amp DC or AC. Jaws accept conductor size of 1 X 750 MCM ( 30 mm/1.18 in. diameter) or 2 x 500 MCM (2 x 25 mm/0.98"). AC and DC accuracy: +/- (2.0 percent of reading + 0.5A). Measurement type: Hall sensor. Nominal current range: 600 A AC, 1000 A DC. Continuous current range: 1 A - 600 A AC, 1 A - 1000 A DC. Maximum non-destructive current: 1000 A. Lowest measurable current: 0.5 A. Useable frequency: DC - 10 kHz. Output levels: 1 mV/A. With zero error adjustment. Safety: CAT III, 600 V. Maximum voltage: 600 V. Battery life: 9 V, 60 h. Maximum conductor diameter: 30mm, 2 x 25mm. Output cable length: 1.6m. With shrouded banana plugs.
-
4.2 of 5.0 with 32 Reviews
SALE PRICE: $385.19
Manufacturer: Fluke Corporation
Brand: Fluke
Model: 3949761
Manufacturer: Fluke Corporation
Brand: Fluke
Model: 3949761
Fluke 5A clamp-on current transformer for 1750 3 phase power quality recorder.
-
4.2 of 5.0 with 13 Reviews
SALE PRICE: $386.99 11% OFF
Manufacturer: Fluke
Brand: Fluke
Model: FLK-A3000 FC KIT
Manufacturer: Fluke
Brand: Fluke
Model: FLK-A3000 FC KIT
|
Fluke a3000 FC Wireless AC Current Clamp Module A fully functional true-rms current clamp meter that wirelessly relays measurements to other Fluke ConnectTM enabled master units, listed below. Fluke 3000 FC DMM Fluke Ti200/300/400 Infrared Camera PC via optional pc3000 FC Adapter Fluke Connect Mobile app Fluke Connect See it. Save it. Share it. All the facts, right in the field. Smart phone not included with purchase. Fluke Connect with ShareLive is the only wireless measurement system that lets you stay in contact with your entire team without leaving the field. The Fluke Connect mobile app is available for Android (4.3 and up) and iOS (4s and later) and works with over 20 different Fluke products-the largest suite of connected test tools in the world. And more are on the way. Go to the Fluke website to find out more. Make the best decisions faster than ever before by viewing all temperature, mechanical, electrical and vibration measurements for each equipment asset in one place. Get started saving time and increasing your productivity.   Fluke 3000 FC Series Wireless Multimeter  Start building tomorrow's test tool system today with the Fluke 3000 FC Digital Multimeter. The new Fluke Connect system of test tools communicates with the new Fluke Connect mobile app on your AndroidTM or iOS smart device, allowing you to share live measurements, monitor readings from safe distances, and get your job done easier than ever before. The wireless digital multimeter functions as the mobile hub, displaying readings from up to three module tools simultaneously from up to 20 meters away. The Fluke Connect modules also give you the flexibility to build your wireless test tool system how you want when you want. The Fluke 3000 FC Wireless Test Tools are a team and the modules are team players
-
4.2 of 5.0 with 19 Reviews
SALE PRICE: $399.99
Manufacturer: TES
Brand: TES
Manufacturer: TES
Brand: TES
|
EMF Meter TES-593 Features: 10 MHz to 8.0 GHz frequency range For isotropic measurements of electromagnetic fields Non-directional (isotropic ) measurement with three-channel measurement probe High dynamic range due to three-channel digital results processing. Configurable alarm threshold and memory function High frequency (RF) electromagnetic wave field strength measurement. Mobil phone base station antenna radiation power density measurement Wireless communication applications (CW,TDMA,GSM,DECT) Wireless LAN (Wi-Fi) detection, installation Spy camera,wireless bug finder Cellular/Cordless phone radiation safety level Microwave oven leakage detection Personal living environment EMF safety RF power measurement for transmitters Specifications: •Sensor type:Electric field (E) •Frequency range:10MHz to 8.0 GHz •Directional characteristic:Isotropic,3-dimensional •Measurement range (CW signal>50MHz):38mV/m to 11V/m •Absolute error(@1V/m and 50MHz):± 1.0dB •Frequency response (taking into account typ.CAL factor):± 1.0dB (50MHz to 1.9 GHz),±2.4dB(1.9GHz to 35GHz) •Measurement method:Digital,triaxial measurement •Directional characteristic:Isotropic, triaxial •Measurement range selection:One continuous range •Display resolution:0.1mV/m, 0.1 μA/m, 0.1 μW/m²,0.001 μW/cm² •Setting time:Typically 1s ( 0 to 90% of meas. value) •Display refresh rate:Typically 400mS •Display type:LCD 4 digit •Audible alarm:Buzzer •Measurement units:mV/m,V/m , μA/m,mA/m,μW/m² ,mW/m², μW/cm² •Measurement display value: Instantaneous measured value, maximum value or average value since power-on
-
4.2 of 5.0 with 13 Reviews
SALE PRICE: $422.49 11% OFF
Manufacturer: Fluke
Brand: Fluke
Model: A3001 FC
Manufacturer: Fluke
Brand: Fluke
Model: A3001 FC
|
Fluke A3001 FC Wireless Essential Kit With A3001 Start building tomorrow's test tool system today with the Fluke 3000 FC Digital Multimeter. The new Fluke Connect system of test tools communicates with the new Fluke Connect mobile app on your AndroidTM or iOS smart device, allowing you to share live measurements, monitor readings from safe distances, and get your job done easier than ever before. The wireless digital multimeter functions as the mobile hub, displaying readings from up to three module tools simultaneously from up to 20 meters away. The Fluke Connect modules also give you the flexibility to build your wireless test tool system how you want when you want. The Fluke 3000 FC Wireless Test Tools are a team and the modules are team players. You connect any of the Fluke ConnectTM Modules to your test point and then view the results on specific Fluke Connect enabled hardware or through Windows ®  software on your PC-up to 20 meters (65.6 feet) away. Save time and conduct more tests with less trips. Productivity Communicate with your iOS (4s and later) and AndroidTM (4.3 and up) devices with the new Fluke Connect mobile app Wireless technology allows connectivity between your phone, PC, and all Fluke Connect enabled test tools Let your team see what you see in an instant with ShareLiveTM video call Save money and time by taking multiple measure-ments simultaneously Isolate intermittent events or record signal fluctuations without even being there using the log function on the modules View results on your computer with the PC Adapter Work with fewer interruptions by recording multiple sessions before downloading. Data is saved to a PC in
-
4.2 of 5.0 with 33 Reviews
SALE PRICE: $449.00 1% OFF
Manufacturer: Ohaus
Brand: Ohaus
Model: 83998179
Manufacturer: Ohaus
Brand: Ohaus
Model: 83998179
The ABS plastic T51P is ideal for use in conjunction with bench and floor scales for standard industrial weighing applications. With various customization and configurability options, optional NiMH battery operation, flexible mounting capabilities, and multiple connectivity options, T51P provides the functionality needed for most standard industrial weighing needs.
|
|