Torque Gauges - Page 13

Manufacturer: Mountz Brand: Mountz

Mountz MTS 2500 Dial Torque Analyzer

Manufacturer: AWS Brand: AWS

The TT-QC-750f-3/4 Digital Torque Tester, Range 75 - 750 Lb-ft, Drive Size 3/4" is a simple bench mount digital torque tester for quick tool verification. Our smallest and lowest cost bench mount torque tester to date, the TT-QC Quick Check is perfect for quick equipment verification right at your workstation. Small and light enough to use anywhere, this unit can still be used alongside any metro logy grade tester. A unique rotating display (optional) and dual bolt pattern allow the tester to be used in both horizontal and vertical configurations, and make switching between the two modes almost effortless. It is ideal for switching between pistol grip and inline tool checking. The TT-QC takes just seconds to change test parameters, and works in either one button or automatic modes of operation. Reliability and ease of use are enhanced with features such as: Sign Lock, Peak Blanking, Auto Clear.

Manufacturer: AWS Brand: AWS

The AWS TT-3005 Digital Torque Tester, Range 5.000 - 50.00 Lb-in, Drive Size 1/4" is designed specifically for the needs of todays production facilities. These powerful and versatile systems accommodate most testing requirements at an outstanding cost benefit. perfect for testing click, dial, and digital wrenches, plus most power tools including impulse, DC electric and pneumatic.Storage memory allows 999 data points to be saved to the unit for review, or transmitted to a local printer or PC via the standard RS232 interface. The unique keylock feature enables tamper-proof operation. High and low limits are easily set, and a panel mounted LED provides visual notification to the user when torque reaches these limits. Systems include dedicated internal transducers in vertical or horizontal configurations, and rundown fixtures for power/pulse tool testing.

Manufacturer: Cedar Brand: Cedar

The Cedar i-8 Torque Tester for Power Drivers & Wrenches, Complete Kit, Capacity 7 lbf-in/ 8 Kg-cm/ 80 N-cm, 110V is ideal for calibrating electric screwdrivers with torque control. It features peak mode to capture the peak torque achieved during a test, real time mode to display torque transients, and peak down mode to capture critical first peak value. Standard 3/8" drive is good for checking torque wrenches but not impact wrenches. All digital torque testers are sold in kit form complete with tester, hard carrying case, 2 smart driver adapters and AC charger/adapter.Smart driver adapters simulate screw tightening, eliminating the need for reversing the power driver which is required for conventional driver adapters.

Manufacturer: Imada Brand: Imada Model: DTXS-15-120V

The EL display is visible in dark and light locations and shows torque value, unit, peak, and can be configured with additional user-selectable data including memory data, +NG count, high/low setpoints, 1st and 2nd peaks, etc. Color-coded LED indicators alert the user to Go/NoGo conditions. Orange lights for less than low setpoint, green lights between high and low, and red for over the high. Process and transmit 2,000 actual data per second, not just the peak from a high sampling rate. Optional Force Recorder data acquisition software is designed to process up to 2,000 data per second. ZT?Logger data acquisition software downloads data from the tester memory or captures continuous data at 10 data/second. Zero the tester or capture data while at the computer. All tester programming can be set and saved from the software. All DTXS cap torque testers include a 3 Point Certificate traceable to NIST. DTXS cap torque testers include AC adapter/charger, USB Cable, Driver CD, built-in Ni-MH rechargeable batteries, 1? high standard pegs (optional long pegs, calibration kit and ISO Calibration available).

Manufacturer: Imada Brand: Imada

The CAP-HT-4-RS Hand-held Cap Torque Tester with Data Output, Cap. 70.00 ozf-in./ 5.00 Kg-cm / 50.00 N-cm is an instrument that offers programmable high/low setpoints for go/no-go testing. ORANGE lights up for measurements less than Low setpoint, GREEN for between High and Low setpoint, and RED for over High setpoint. This Cap Torque Tester stores up to 1,000 values in memory, which can be displayed or transmitted using serial output.

Manufacturer: AWS Brand: AWS

The AWS ILTS-1000F Inline Digital Torque Tester for Quick Tool Verification, Range 100 - 1000 Lb-ft, Drive Size 1" is used to convert any non-impacting torque tool into a complete torque measuring & analyzing system, simply connect the tester to the square drive, attach a socket and measure clockwise or counter-clockwise torque. Suitable for use with any hand tool or non-impacting power tool including torque wrenches, breaker bars, nut-runners and more. Internal NiMH rechargeable batteries provide 8-10 hours continuous use.The ILTT takes just seconds to change test parameters, and works in either one button or automatic modes of operation. Reliability and ease of use are enhanced with features such as: Sign Lock, Peak Blanking and Auto Clear.

Manufacturer: Wilmar Performance Tool Brand: Performance Tool Model: M206

1/2'' Drive (includes adapters for 3/8'' and 1/4'' drive). Rotatable display. Blow molded storage case. 30-150 ft./lb. range.

Manufacturer: Mark-10 Brand: Mark-10 Model: AC1026-1

Designed for use with Series ST torque tool testers, these fixtures are recommended to assist in obtaining accurate readings when testing power torque tools.

Manufacturer: AWS Brand: AWS

The AWS RDIA-150 150 Lb-in Rundown Fixture 1/4 inch Drive is required for accurate torque measurement for power-driven torque controlled tools (electric, hydraulic or pneumatic). The RDF Joint Simulator are not necessary or useful when measuring torque on manually-operated torque tools (screw-drivers, wrenches, etc.) It simulates the conditions found when using the tool in real-world conditions, allowing the speed of the power tool motor to ramp-up to normal operating speeds resulting in a more accurate and repeatable measurement of the torque. The Joint Simulator is typically fabricated from machined steel with the appropriate drive size as needed. Internally it is comprised of a series of Belleville washers, designed to compress as the bolt tightens. By varying the arrangement of these washers, various joint rates can be simulated soft, medium and hard.Unless otherwise, specified, Joint Simulators are configured to simulate a medium joint. The joint rates can be adjusted by the user by changing the orientation of the Belleville washers upside down.