Pressure Gauge Accessories - Page 13

Manufacturer: Dwyer Instruments Brand: Dwyer Model: A-321

Dwyer Instruments A-321 Brass safety relief valve

Manufacturer: Winters Instruments Brand: Winters Model: NVA6001

Winters NVA Series Needle Valve. Straight Body, Hard Seat. Ideally suited for severe duty oil and gas installations including refineries and processing plants, water treatment plants, power plants and hydraulic applications. ASME B1.20.1 compliant. Material: Carbon Steel. NPT Connection: 1/2" Male x 1/2" Female. Max Pressure: 10,000 psi.

Manufacturer: Testo AG Brand: Testo Model: 0554 3303

Testo measurement chamber for optimum flow on humidity sensor. G 1/2" standard pressurized air quick connection. 15 bar Pressure. For use with 6740 series pressure dewpoint transmitters.

Manufacturer: Trerice Brand: Trerice Model: 872-10

872 Series Pressure Snubbers are designed to improve readability and prevent wear on delicate gauge mechanisms by slowing rapid pressure changes and reducing shock and chattering. A pressure snubber should be installed on a gauge in any application where pressure spikes and/or pulsations may be present. If a single snubber does not correct the oscillation, it is recommended to place an additional snubber in line with the first. Trerice Pressure Snubbers reduce the pulsation by forcing the pressure medium through a porous metal core and are constructed from brass or 303 stainless steel for use on a variety of pressure media.

Manufacturer: WIKA Instrument Corporation Brand: WIKA Model: 50334611

The WIKA brass adjustable throttling snubber has an adjustable needle valve to restrict flow under varying operating conditions, a temperature rating of 14 to 248 degrees F (-10 to 120 degrees C), a male x female connection with either 1/4" or 1/2" NPT rate, and operates under pressures up to 3,400 psi. The brass wetted parts are for use with non-corrosive liquid and gas pressure. The adjustable stainless steel needle valve restricts flow under operating conditions with variable pressure. The snubber has a nitrile rubber O-ring for a tight seal. It operates under pressures up to 3400 psi, and is effective for applications with pressures above 5 psi. The snubber measures 2.4" (6 cm) high and 1" (2.5 cm) in diameter and has a temperature rating of 14 to 248 degrees F. Pressure gauge snubbers suppress the effects of pressure pulses and pressure peaks to increase the service life of pressure gauges in harsh applications, such as on reciprocating pumps and compressors, hydraulic presses, or fluid power systems, and improve the reading accuracy of the gauge. Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another reference. For instance, gauge pressure measures pressure relative to ambient air. An example of a pressure gauge measuring relative to ambient air is a tire pressure gauge or a blood pressure gauge. Differential pressure is the difference in pressure between two points, such as when measuring liquid flow along various points in a pipeline. An absolute pressure gauge measures pressure relative to a perfect vacuum, such as an atmospheric or barometric pressure gauge. All types of pressure gauges include either a male or a female mou...

Manufacturer: Winters Brand: Winters Instruments Model: SSP595

The Winters SSP series stainless steel 304 syphon has a seamless 180-degree coil, and a male connection with either 1/4" or 1/2" NPT rate, and operates either in pressures up to 500 psi (3,447 kPa) at 680 degrees F (360 degrees C) or in pressures up to 1,650 psi (11,376) at 630 degrees F (332 degrees C). The syphon, also known as a siphon, is either schedule 40 or schedule 80 stainless steel 304 for corrosion resistance, and is seamless for additional strength. The schedule 40 stainless steel syphon operates in pressures up to 500 psi (3,447 kPa) at 680 degrees F (360 degrees C). The schedule 80 stainless steel syphon operates in pressures up to 1,650 psi (11,376) at 630 degrees F (332 degrees C). The schedule 80 stainless steel syphon comes with a male connection with a 1/4" NPT (National Pipe Thread) rate. The schedule 40 stainless steel syphon comes with either a 1/4" or a 1/2" NPT rate. This syphon prevents hot steam from entering a pressure gauge, diaphragm seal, or transmitter in applications with temperatures above 100 degrees F (37 degrees C). Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another reference. For instance, gauge pressure measures pressure relative to ambient air. An example of a pressure gauge measuring relative to ambient air is a tire pressure gauge or a blood pressure gauge. Differential pressure is the difference in pressure between two points, such as when measuring liquid flow along various points in a pipeline. An absolute pressure gauge measures pressure relative to a perfect vacuum, such as an atmospheric or barometric pressure gauge. All types of pressure gauges include either a male or a female moun...

Manufacturer: Marshalltown Brand: Marshalltown

Offer is for one of the best quality temperature probe gauge made by Marshalltown (USA). This new heavy duty dial gauge has a steel case and a 3x glass face with a brass 1/2" NPT bottom mounting thread, a soldered copper probe (1/4" diameter 3" long). There is a manually adjusting dial for indicating high temperature readings and is resettable. There is an adjusting screw on back for calibrations. This gauge is a must for quick visual temperatures readings of liquids or air temperature. This very expensive and precision gauge is being sold cheaply. Limited Supply.

Manufacturer: Winters Brand: Winters Model: STP001

Test plug. Facilitates quick pressure and temperature readings at recommended test points within process. Made of brass. Diaphragm/Core: NBR (Buna N). Applications: mainly used in heating, ventilation and air conditioning industries. 1 year warranty. Temperature rating: -40 degree F to 302 degree F. Maximum pressure rating: 1000 psi (6895 kPa). Connection: 1/4" NPT Male.

Manufacturer: Andux Brand: Andux

Measurement Ranges: PSI: 0-100, Bar: 0-7, KPA: 0-700, Kgf/cm2: 0-7 Minimum Increment: 0.5 PSI Power Source: 1*CR2032 3V Lithium Coin Cell ( Included ) Data display in LCD about 15 seconds. Device can be shot down manually and it will also automatically turn off after 30 seconds lying idle.

Manufacturer: Dwyer Brand: Dwyer

8" Static Probe 90 Deg Sensor, Intregal Flange, Stainless Steel, Gasketed, 2 Self Tapping Screws Included