Vacuum Gauges

Manufacturer: Miljoco Brand: Miljoco Model: PLF2598L001

2.5" Glycerin-filled pressure gauge (vacuum range), stainless steel case, crimped ring, brass internals, 1/4" NPT LM, 30"Hg/Bar.

Manufacturer: WIKA Instrument Corporation Brand: WIKA Model: 9318070

The WIKA industrial pressure gauge has copper alloy wetted parts, which resist corrosion against salty liquids, and a circular dial that is three inches in diameter and enclosed in a forged brass case for increased durability in corrosive environments. The gauge measures pressure from 15 pounds per square inch (psi) to 15,000 psi, and is accurate to + or - 2/1/2 percent of span over the entire range of the gauge, or American Society for Mechanical Engineering (ASME) B40.100 Grade A accuracy class. The male connection is mounted on the lower back of the gauge and has a 1/4" National Pipe Thread (NPT) rate. This pressure gauge is suitable for use with paper machines and hydraulic presses.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another reference. For instance, gauge pressure measures pressure relative to ambient air. An example of a pressure gauge measuring relative to ambient air is a tire pressure gauge or a blood pressure gauge. Differential pressure is the difference in pressure between two points, such as when measuring liquid flow along various points in a pipeline. An absolute pressure gauge measures pressure relative to a perfect vacuum, such as an atmospheric or barometric pressure gauge. All types of pressure gauges include either a male or a female mount to connect to the vessel where pressure is being measured, and display results on a dial with varying increments of measure across a given range.WIKA Instrument Corporation is a global manufacturer of pressure and temperature measurement instruments, including pressure gauges, diaphragm seals, pressure transmitters, and thermometers, that meet International Organizati...

Manufacturer: Yellow Jacket Brand: Yellow Jacket 69051 eVac Pro Vacuum Gauge Model: 69051

Range: 0 - 25,000 Microns (3333.1 Pa, 33.331 mBar, 25,000 mTorr, 25.000 mmHg) Vacuum Accuracy: 5% of Reading +/- 5 Microns Vacuum Resolution: 0.1 Micron (@ 0.0 to 9999.9 Microns) Temperature Accuracy: 0.2°F (0.1°C) Temperature Resolution: 0.1° Warm-up Time: Instant Response Time: Instant Power: 9V Alkaline Battery (included) (9V Lithium recommended for low temperature operation) Battery Life: Up to 300 Hours Operating Temperature: 10°F - 122°F (-12°C - 50°C) Weight: 6 oz. (170 g) including battery and swivel hook Dimensions: 3.5" x 3" x 1.25" (9 x 7.5 x 3 cm)

Manufacturer: TOOL GADGET Brand: TOOL GADGET® Color: silver

Pouring (wide) end diameter = 1-5/16" (35 mm) Insertion (narrow) end diameter = 3/16" (5 mm) Plastic material Easily transfer your essential oils into smaller dispensers As with any product, please wash before use.

Manufacturer: AccuVac Technology Brand: AccuVac Technology Model: CF133-000-NT

CF133 inch mini knife edge seal flange is similar to Conflat /Del-Seal flange. It is a blank flange with tapped holes. Vacuum Flanges are manufactured in California using DFARS SS304L ESR material. Flange seal performance specifications are: Leak Rating 10-13 Torr; Temperature Range 200 to 450 deg C. The seal mechanism knife-edge and bolting design are compatible with the industry application standards. We offer 14 day return policy if the product is returned, shipment paid, undamaged and unused.

Manufacturer: Wahl Instruments, Inc. Brand: Wahl Instruments Model: 443-199C

This specialized Four-Position Temp-Plate is for monitoring overheat conditions directly on the surface of integrated circuits during wafer fabrication. Designed to withstand exposure to high heat, vacuums and corrosive gases when used in the demanding semiconductor industry.

Manufacturer: AccuVac Technology Brand: AccuVac Technology Model: CF275-038-NT

Cf275 inch knife edge seal flange is similar to Conflat /Del-Seal flange. It is a non-rotatable bored flange with tapped holes. Vacuum Flanges are manufactured in California using DFARS SS304L ESR material. Flange seal performance specifications are: Leak Rating 10-13 Torr; Temperature Range 200 to 450 deg C. The seal mechanism knife-edge and bolting design are compatible with the industry application standards. We offer 14 day return policy if the product is returned, shipment paid, undamaged and unused.

Manufacturer: Thuemling Instrument Group Brand: SPAN Model: LFS-210-(1/0/15 BAR)-G

Metric BAR only single scale dial with 1/4" NPT male bottom pressure connection. Span gauges are designed for rugged service applications. Liquid fill fluid dampens the gauge pointer movement for improved readings and longer life, making these gauges ideal for high shock and vibration applications. Its Zytel nylon case and ring offer good appearance and excellent resistance to chemical, weather, and corrosion attack. Heavy Duty, Hydraulic, Outdoor, Vibration Service.

Manufacturer: Thuemling Industrial Products Brand: Duro Model: 4207-0111 Color: Stainless

Duro Pressure Gauge is 0.5% full scale accuracy ASME B40.100 Grade 1A accuracy class. Large 4.5-Inches dial allows easy viewing and precise readings. High quality Stainless Steel case, Brass 1/2-Inches male NPT connection and pressure system, for use with any liquid or gas that is compatible with brass. Quality made in USA.

Manufacturer: NOSHOK, Inc. Brand: NOSHOK Model: 25-300-30-vac

High quality liquid filled gauges designed for durability, accuracy and long life. Pressure ranges from vacuum through 15000 psi. 2-1/2" Dial sizes bottom connected; single scale. Heavy one-piece die casting integrates the case, connection, movement. and bourdon tube support into a solid unit to eliminate leakage. Glycerine fill greatly reduces effects of vibration, pulsation and shock. Dials are printed with bold UV resistant ink for ease of readability even after years. of exposure to direct sunlight. Used in demanding applications that are not corrosive to brass, where vibration and pulsation are present. Die cast brass natural brass finish. Phosphor bronze "C" tube. Brass and Nickel-Silver with highly polished bearing surfaces. Safety relief disc on the top of the case. +/-1.5 percent Full scale ASME grade A Accuracy. Aluminum, white background with black markings. Glycerine and water fill liquid. Dynamic Pressure: The working pressure should be limited to 60 percent of the dial range for long service life. Static Pressure: The working pressure, where no sharp fluctuations occur, should be limited to 90 percent of the dial range. 0 to 160 degree F Ambient temperature. -4 to 140 degree F Media temperature.