Vacuum Gauges - Page 5

Manufacturer: PIC Gauges Brand: PIC Gauges Model: 312D-402A

The PIC Gauge 312D-402A pressure gauge has stainless steel 316 wetted parts, which provide corrosion resistance, and a dry, fillable, 4" circular dial enclosed in a corrosion-resistant stainless steel case. The dry case can be filled with fluid (not included). Fluid dampens vibration and reduces wear, increasing accuracy and life span compared to dry pressure gauges. The laminated safety glass lens is resistant to corrosion and scratching that can cause reading errors. The black aluminum pointer is adjustable, and the stainless steel bezel is removable. The gauge has a 30/0" Vac psi pressure range with 5 Vac psi figure intervals and 0.5 psi graduation intervals, and is accurate to + or - 0.5 percent of span over the entire range of the gauge, or American Society for Mechanical Engineering (ASME) Grade 2A accuracy class. The male connection mounted on the lower back portion of the gauge is welded to the case and has a 1/2" National Pipe Thread (NPT) rate. The pressure gauge is suitable for measuring pressure in corrosive environments. SpecificationsWetted parts materialStainless steel 316Case materialStainless steel, welded case-to-stem connectionUnits of measureVAC psiPressure range30/0"Accuracy+ or - 0.5% of span, ASME B40.1 Grade 2ADial size4"Dial lens materialLaminated safety glassDial fill materialDry, but fillableConnection1/2" NPTMountLower backOperating temperature range-30 to +180 degrees F (dry); +30 to +160 degrees F (glycerin filled)PointerAdjustable, black aluminumBezelRemovable, stainless steelPressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to a reference measurement. Gauge pressure measures the pressure of something relativ...

Manufacturer: AccuVac Technology Brand: AccuVac Technology Model: ASA-7.5-400-R

Accuvac Technology ASA Flanges are Precision machined from Crossed Forged SS304 Stainless Steel Plate with Surface finish of 32 Micro-inch or better. These flanges can be baked to 200 Deg C and have a Vacuum Range of up to 10 to -8 Torr. Some of the Applications are Vacuum Chambers, Manifolds, Valves, Pumps, Viewports and Variety of Experimental Devices.

Manufacturer: PIC Gauges Brand: PIC Gauges Model: 312L-404A

The PIC Gauge 312L-404A pressure gauge has stainless steel 316 wetted parts, which provide corrosion resistance, and a glycerine filled, 4" circular dial enclosed in a corrosion-resistant stainless steel case. The glycerine filled dial dampens vibration and reduces wear, increasing accuracy and life span compared to dry pressure gauges. The laminated safety glass lens is resistant to corrosion and scratching that can cause reading errors. The black aluminum pointer is adjustable, and the stainless steel bezel is removable. This gauge has an accuracy of + or - 1 percent of span over the entire range of the gauge, or American Society for Mechanical Engineering (ASME) Grade 2A accuracy class. The male connection mounted on the lower back portion of the gauge is welded to the case and has a 1/4" National Pipe Thread (NPT) rate. The pressure gauge is suitable for measuring pressure in corrosive environments.

Manufacturer: Dwyer Instruments Brand: Dwyer Model: DPG-000

Replace your outdated analog gauges with the new Series DPG-000 Digital Pressure Gauge. The Series DPG-000 possesses a ±0.5% full-scale accuracy sensor. The 4 digit digital display will reduce the potential for errors in readings by eliminating parallax error commonly produced with analog gauges. Series DPG is battery powered and has an auto-shut off to conserve battery life. Battery life, on average, will last 2000 hours. A 4 button keypad allows easy access to features without the need to work through complex menus or difficult key combinations. These features include backlight, peak and valley, Tare or auto zero and conversion of the pressure units.

Manufacturer: Accutools Brand: Accutools

Accutools A10649 BluVac PRO Digital Vacuum Gauge Includes: Unit, Rubber Boot, Brass Coupler, SS Swivel Hoop, Batteries, Manual The AccuTools® BluVac Professional Digital Vacuum Gauge is a state-of-the-art digital vacuum gauge utilizing patented technology to deliver the highest accuracy and resolution available. The BluVac Pro builds upon the success of the original BluVac, with additional display units (PSI and inHg), an Evacuation Progress Indicator, Saturation Temperature Display, and a Leak Rate Indicator in either units/second or units/minute. Most importantly, the BluVac Pro's unique Rise Time Analyzer can consistantly ensure proper evacuation, providing a PASS or FAIL indication in as little as 15 seconds. This elimates the need to wait for the completion of a manual rise-time test. Operating for up to 300 hours on a single 9V alkaline battery, the BluVac Pro sports a large 1/2" numeric display and a bright blue backlight. The BluVac Pro measures from 0-25,000 microns with 0.1 micron resolution below 10,000 microns. The BluVac Pro has two programming modes -- Evacuation and Rise Time Testing -- dramatically increasing your productivity on the job. Its Vacuum Leak Rate indicator shows both evacuation progress, and assists in determining the presence of leaks or moisture. Also included are Ambient and Saturation Temperature Indicators, accurate to within 0.2°F (0.1°C). The Evacuation Progress Indicator show increasing vacuum even while the pressure exceeds 25,000 Microns. Innovative Oil Sensor and Self-Diagnostics ensure accuracy. The BluVac series of digital vacuum gauges are the only field-calibratable vacuum gauges that require no special equipment for calibration.

Manufacturer: AccuVac Technology Brand: AccuVac Technology Model: CF1000-000-RT

Cf10 inch knife edge seal flange is similar to Conflat /Del-Seal flange. It is a blank flange with tapped holes. Vacuum Flanges are manufactured in California using DFARS SS304L ESR material. Flange seal performance specifications are: Leak Rating 10-13 Torr; Temperature Range 200 to 450 deg C. The seal mechanism knife-edge and bolting design are compatible with the industry application standards. We offer 14 day return policy if the product is returned, shipment paid, undamaged and unused.

Manufacturer: AccuVac Technology Brand: AccuVac Technology Model: ASA-13.5-800-N

Accuvac Technology ASA Flanges are Precision machined from Crossed Forged SS304 Stainless Steel Plate with Surface finish of 32 Micro-inch or better. These flanges can be baked to 200 Deg C and have a Vacuum Range of up to 10 to -8 Torr. Some of the Applications are Vacuum Chambers, Manifolds, Valves, Pumps, Viewports and Variety of Experimental Devices.

Manufacturer: Ashcroft Inc. Brand: Ashcroft Model: 451082AS02L30/0IMV

The standard Ashcroft test gauge case style features a solid-front aluminum case with a hinged ring. The dial has a polished mirror band for pointer reflection to prevent parallax error. Pointer is a balanced-friction adjustable design with red knife edge tip for easy reading.

Manufacturer: AccuVac Technology Brand: AccuVac Technology Model: ASA-11-800-R

Accuvac Technology ASA Flanges are Precision machined from Crossed Forged SS304 Stainless Steel Plate with Surface finish of 32 Micro-inch or better. These flanges can be baked to 200 Deg C and have a Vacuum Range of up to 10 to -8 Torr. Some of the Applications are Vacuum Chambers, Manifolds, Valves, Pumps, Viewports and Variety of Experimental Devices.

Manufacturer: AccuVac Technology Brand: AccuVac Technology Model: ASA-11-600-R

Accuvac Technology ASA Flanges are Precision machined from Crossed Forged SS304 Stainless Steel Plate with Surface finish of 32 Micro-inch or better. These flanges can be baked to 200 Deg C and have a Vacuum Range of up to 10 to -8 Torr. Some of the Applications are Vacuum Chambers, Manifolds, Valves, Pumps, Viewports and Variety of Experimental Devices.