Vacuum Gauges - Page 10

Manufacturer: PIC Gauges Brand: PIC Gauges Model: 313D-402A

The PIC Gauge 313D-402A pressure gauge has stainless steel 316 wetted parts, which provide corrosion resistance, and a dry, fillable, 4" circular dial enclosed in a corrosion-resistant stainless steel case. The dry case can be filled with fluid (not included). Fluid dampens vibration and reduces wear, increasing accuracy and life span compared to dry pressure gauges. The laminated safety glass lens is resistant to corrosion and scratching that can cause reading errors. The black aluminum pointer is adjustable, and the stainless steel bezel is removable. The gauge has a 30/0" Vac psi pressure range with 5 psi figure intervals and 0.5 psi graduation intervals, and is accurate to + or - 0.5 percent of span over the entire range of the gauge, or American Society for Mechanical Engineering (ASME) Grade 2A accuracy class. The male connection mounted on the lower back portion of the gauge is welded to the case and has a ring clamp and a 1/2" National Pipe Thread (NPT) rate. The pressure gauge is suitable for measuring pressure in corrosive environments. SpecificationsWetted parts materialStainless steel 316Case materialStainless steel, welded case-to-stem connectionUnits of measurepsiPressure range30/0" Vac psiAccuracy+ or - 0.5% of span, ASME B40.1 Grade 2ADial size4"Dial lens materialLaminated safety glassDial fill materialDry, fillableConnection1/2" NPT with clamp ringMountLower backOperating temperature range-30 to +180 degrees F (dry); +30 to +160 degrees F (glycerin filled)PointerAdjustable, black aluminumBezelRemovable, stainless steelPressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to a reference measurement. Gauge pressure measures the ...

Manufacturer: NOSHOK, Inc. Brand: NOSHOK Model: 40-400-30-vac

The NoShok 400 series pressure gauge has stainless steel 316 wetted parts, a dry, fillable, or liquid-filled circular dial enclosed in a stainless steel 304 case, a lower mount or center back male connection, and measures pressure with a single scale with an accuracy of + or - 1%, 1.5%, or 2.5%. The stainless steel 316 wetted parts and the stainless steel 304 case provide corrosion resistance. The gauge measures pressure with a single psi or Hg. vacuum scale. The dial comes in 1.5" (40 mm), 2.5" (63 mm) diameters, 4" (100 mm), and 6" (152 mm) diameters. The dial can be dry, dry/fillable, or liquid filled, depending upon the model. The specifications for each type of gauge vary according to the gauge size. The dial lens comes in three different forms of transparent materials for strength and clarity. The lens on the 1.5" and 4" diameter dials is instrument glass. The lens on the 2.5" diameter dial is transparent polyamide. The lens on the 6" dial is laminated safety glass. The dial is white aluminum with black markings and is UV resistant. The pointer type varies depending upon the dial size. The 1.5" dial has a black finished aluminum pointer. The 2.5" and 4" dials have a balanced aluminum pointer with a black finish. The 6" dial also has a balanced aluminum pointer with a black finish, and it is micrometer-adjustable.Gauge accuracy varies according to gauge size. The 1.5" dial is accurate to + or - 2.5% over the entire range of the gauge, American Society of Mechanical Engineers (ASME) B40.100 Grade B accuracy class. The 2.5" gauge is accurate to + or - 1.5% over the entire range of the gauge, ASME B40.100 Grade A accuracy class. The 4" and 6" gauges are accurate to + or - 1% over the entire range of the gauge, ASME B40.100 Grade 1A accuracy class. All gauges come with either a lower mount or center back connection. The connection for the 1.5" gauge is a 1/8" NPT (National Pipe Thread) rate. The connection for the 2.5" gauge is a 1/4" NPT rate. The connection for the 4" and 6" gauges is a 1/2" NPT rate. The move...

Manufacturer: Kodiak Controls, Inc. Brand: Kodiak Controls Model: KC301L2530/0/DSM2511LP

2 1/2" dial pressure gauge mounted to 1/4" FNPT 316SS diaphragm seal. The pressure gauge has a 304SS case and is Glycerin filled to help dampen the needle during vibrating applications. The body and diaphragm of the gauge isolator is 316SS. The mounting style is lower mount. Range is 30"Hg vacuum to 0"hg.

Manufacturer: Dwyer Instruments Brand: Dwyer Model: 115

The Dwyer Durablock series 100 portable pressure gauge with a plastic carrying case is a solid plastic portable manometer kit, and has a polished aluminum scale, a vertical or inclined drilled bore, magnetic clips, and measures pressure with a single scale in inches of water column (WC) with an accuracy of + or - 1% or 2%. The gauge is made of 1" thick solid transparent acrylic plastic for clarity and durability. The vertical drilled bore is free of bends or crooks, eliminating the need for recalibration because of distortion. The inclined model has a thumbscrew to provide rapid and accurate leveling with reference to the integral ground glass bubble level. The gauge is filled with gage oil with high wettability characteristics to form a consistent, well-shaped meniscus for easy readability, and it comes with a bottle of replacement 0.826 red gage fluid. The polished aluminum scale reflects the meniscus for parallax-free reading of measurements, and accuracy is + or - 1% or 2% of full scale. Two magnetic clips allow rapid positioning of the gauge on any vertical iron or steel surface for hands-free use. Two rapid shut-off nylon tubing connections, a 9 ft. length of rubber tubing, and a terminal tube allow accurate measurements in turbulent flow conditions, such as in cooling ducts. This gauge is suitable for testing for air flow volume when installing and servicing residential and small central air conditioning systems. This gauge is suitable for determining the volume of air flowing through ventilating, heating, refrigeration, and air filter systems. Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Most often, pressure gauges measure pressure relative to another reference. For instance, gau...

Manufacturer: AccuVac Technology Brand: AccuVac Technology Model: ISO-200-800-N

Acuvac Tehcnology ISO Flanges are precision machined from cross forged SS304 Stainless Steel Plate with Surface finish of 32 micro-inches or better. These Flanges can be baked to 200 Deg C and have a Vacuum range of up to 10 to -8 torr. Some of the applications are Vacuum Chambers, manifolds, Valves, Pumps, and a Variety of Experimental Devices.

Manufacturer: AccuVac Technology Brand: AccuVac Technology Model: CF1000-675-500-ST

ACCUVAC TECHNOLOGY Zero Length Reducer.The manufacturer is ISO registered supplier. Vacuum Flanges are manufactured in California using DFARS SS304L ESR material. Flange seal performance specifications are: Leak Rating 10-13 Torr; Temperature Range 200 to 450 deg C. The seal mechanism knife-edge and bolting design are compatible with the industry application standards. We offer 14 day return policy if the product is returned, shipment paid, undamaged and unused.

Manufacturer: NOSHOK, Inc. Brand: NOSHOK Model: 45-660-30-vac

Dial indicating process pressure gauge. Brass gauges are specifically designed for demanding applications in the chemical and petroleum processing industries. 4-1/2" Dial size bottom connected; single scale. +/-0.5 Percent full scale ASME grade 2A accuracy. Working pressure limitations: for dynamic pressure, the working pressure should be limited to 60 percent of the dial range. Static pressure: the working pressure, when no sharp fluctuations occur, should be limited to 90 percent of the dial range. -4 to 150 degree F Ambient temperature. -4 to 150 degree F Media temperature. Used is chemical petroleum and petrochemical refineries, utilities, food processing plants, paper mills, power generating stations, water treatment plants, wherever accuracy, safety, readability and reliability are crucial.

Manufacturer: AccuVac Technology Brand: AccuVac Technology Model: CF1000-800-RT

Cf10 inch knife edge seal flange is similar to Conflat /Del-Seal flange. It is a bored flange with tapped holes. Vacuum Flanges are manufactured in California using DFARS SS304L ESR material. Flange seal performance specifications are: Leak Rating 10-13 Torr; Temperature Range 200 to 450 deg C. The seal mechanism knife-edge and bolting design are compatible with the industry application standards. We offer 14 day return policy if the product is returned, shipment paid, undamaged and unused.

Manufacturer: AccuVac Technology Brand: AccuVac Technology Model: CF1325-000-NT

Cf14.5 inch knife edge seal flange is similar to Conflat /Del-Seal flange. It is a blank flange with tapped holes. Vacuum Flanges are manufactured in California using DFARS SS304L ESR material. Flange seal performance specifications are: Leak Rating 10-13 Torr; Temperature Range 200 to 450 deg C. The seal mechanism knife-edge and bolting design are compatible with the industry application standards. We offer 14 day return policy if the product is returned, shipment paid, undamaged and unused.

Manufacturer: AccuVac Technology Brand: AccuVac Technology Model: CF1450-1200-R

Cf14.5 inch knife edge seal flange is similar to Conflat /Del-Seal flange. It is a bored flange with bolt through holes. Vacuum Flanges are manufactured in California using DFARS SS304L ESR material. Flange seal performance specifications are: Leak Rating 10-13 Torr; Temperature Range 200 to 450 deg C. The seal mechanism knife-edge and bolting design are compatible with the industry application standards. We offer 14 day return policy if the product is returned, shipment paid, undamaged and unused.