Pressure Gauges - Page 44

Manufacturer: Winters Brand: Winters Model: PFQ780R1

The Winters PFQ series pressure gauge with stainless steel wetted parts has a glycerin-filled circular dial enclosed in a stainless steel 304 case, and a male connection, and measures pressure with a single or dual scale with an accuracy of + or - 1.5% or 2.5%. The stainless steel wetted parts provide corrosion resistance. The stainless steel 304 case is also corrosion resistant and is Ingress Protection certified IP65 for protection against solid objects, including dust or liquids. The circular dial comes in 1.5" (40 mm), 2" (50 mm), 2.5" (63 mm), or 4" (100 mm) diameters and is filled with glycerin for protection against vibration and pulsation. The dial is white aluminum with black and red markings. It has an aluminum, anodized black, pointer and the lens is polycarbonate for high impact resistance. The gauge measures pressure with a single psi or Hg. vacuum scale or a dual scale of psi/kPa or Hg. vacuum/kPa. The gauge is accurate to + or - 2.5% of full scale value for the 1.5" and 2" dials and accurate to + or - 1.5% of full scale value for the 2.5" and 4" dials. The male connection is 1/8", 1/4", or 1/2" NPT (National Pipe Thread) rate with a restricted orifice and is located at the bottom or center back of the gauge. The movement is stainless steel, and the welding is tungsten inert gas (TIG) for strength. The 6" (150 mm) socket gasket, the fill plug, and the lens ring gasket are all made of nitrile rubber for a tight seal. The over-pressure limit is 25% for pressures up to 1,400psi (9,653kPa) and 15% for pressures over 1,400psi (9,653kPa). The working pressure is a maximum of 75% of full scale value. The operating temperature is -4 to 150 degrees F (-20 to 65 degrees C). This pressure gauge is suitable for pumps, compressors, hydraulic presses, machinery, pneumatic equipment, and motors in harsh environments.Pressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can ra...

Manufacturer: Winters Brand: Winters Model: PFP671

The Winters PFP series pressure gauge with stainless steel 316 wetted parts has a glycerin-filled circular dial enclosed in a stainless steel 304 case and a 1/4" NPT male connection, and measures pressure with a single or dual scale with an accuracy of + or - 1% or 1.5%. The stainless steel 316 wetted parts provide corrosion resistance. The socket for the 2.5" and 4" gauges is one-piece welded for strength. The stainless steel 304 case is corrosion resistant and Ingress Protection certified IP66 for protection against solid objects, including dust or liquids, and is appropriate for outdoor and severe ambient and process conditions. The circular dial comes in 2.5" (63 mm), 4" (100 mm), and 6" (150 mm) diameters and is filled with glycerin for protection against vibration and pulsation. The dial is white aluminum with black and red markings. It has an aluminum, anodized black, pointer, and the lens is polycarbonate for high impact resistance. The pointer for the 4" and 6" gauges is micrometer adjustable for ease of calibration. The gauge measures pressure with either a single scale in psi or Hg. vacuum, or a dual scale of either psi/kPa or Hg. vacuum/kPa. The 2.5" gauge is accurate to + or - 1.5% of full scale value. The 4" and 6" gauge are accurate to + or - 1% over the entire range of the gauge, American Society of Mechanical Engineers (ASME) B40.100 Grade 1A accuracy class. The male connection has a 1/4" NPT (National Pipe Thread) rate and comes with a bottom, lower back, or center back mount. The bourdon tube is drawn seamless stainless steel 316 for additional strength, the movement is stainless steel 304, and the welding is tungsten inert gas (TIG) for strength. The socket gasket, fill plug, and lens ring gasket are all made of nitrile rubber for a tight seal. The over-pressure limit is 30% for pressures up to 600 psi (4,147 kPa) and 15% for pressures over 600 psi (4,147 kPa). The working pressure is a maximum of 75% of full scale value. The operating temperature is -4 to 150 degrees F (-20 to 65 degrees C). ...

Manufacturer: Fotronic Corporation Brand: Yellow Jacket Model: 41313

Forged body is solid brass for durability. Full porting maximizes capacity. Metal valve handles are full size for easy operation. Hose anchors are forged into back of body at 45°.

Manufacturer: Winters Brand: Winters Model: PPC5043

The Winters PPC series pressure gauge with stainless steel 316L wetted parts has a circular dial enclosed in a phenolic case, and a male connection, and measures pressure with either a single or dual scale with an accuracy of + or - 0.5%. The stainless steel 316L wetted parts provide corrosion. The black phenolic case is durable and Ingress Protection certified IP65 for protection against solid objects, including dust or liquids. The dial is 4.5" (115 mm) in diameter and liquid-fillable to protect against vibration and pulsation. The gauge has a durable phenolic case with a solid front and blowout back for operator safety. The dial is white aluminum with black and red markings. It has an aluminum, anodized black, pointer that is micrometer-adjustable for ease of calibration. The lens is polycarbonate for high impact resistance and has a phenolic lens ring. The gauge measures pressure with either a single scale of psi or Hg. vacuum or a dual scale of psi/kPa or Hg. vacuum/kPa. The gauge is accurate to + or - 0.5% over the entire range of the gauge, American Society of Mechanical Engineers (ASME) B40.100 Grade 2A accuracy class. The male connection is mounted on the bottom of the gauge and is either a 1/4" or 1/2" NPT (National Pipe Thread) rate. The movement is stainless steel 304 with under- and overload stops to protect the gauge system. The restrictor screws reduce shock to the gauge and prevent wear on the movement. The welding is tungsten inert gas (TIG) for strength. The bourdon tube is drawn seamless stainless steel 316L for additional strength. The gasket is made of nitrile rubber for a tight seal. The over-pressure limit is 25% for pressures up to 1500 psi/kPa, 15% for pressures 1501 to 8700 psi/kPa, and 10% for pressures above 8701 psi/kPa. The operating temperature is -40 to 200 degrees F (-40 to 93 degrees C) dry and -4 to 150 degrees F (-20 to 65 degrees C) when filled with glycerin. This pressure gauge is suitable for corrosive media in process, chemical, and petroleum industries.Pressure gauges are ...

Manufacturer: Winters Brand: Winters Model: PPS5043R1Z

Stabilizr dampened movement minimizes effects of pulsation and vibration without liquid filling. Full safety pattern solid front, blowout back. Stainless steel full rotary movement. Micrometer pointer for ease in calibration. 5 Year warranty. Micrometer pointer for ease in calibration. Under and overload stops. 316L Stainless steel wetted parts standard. CRN registered. Dial: 4.5" aluminum with black and red markings. Case: black phenolic with safety blowout back, solid front, integral back flange. Solid wall: phenolic. Lens: polycarbonate. Ring: Phenolic. Pointer: aluminum, anodized black, micrometer adjustable. Socket: 316L stainless steel. Connection: 1/4" NPT. Bourdon tube: 316L stainless steel. Movement: 304 stainless steel protected with over/under stops (stabilized). Gasket material: silicone. Welding: TIG. Over-pressure limit: 25 percent for pressures up to 1500 psi/kPa. Working pressure: maximum 75 percent of full scale value. Ambient/process temperature: -4 degree to 200 degree fahrenheit (-40 degree celcius to 93 degree celcius). Accuracy: +/- 0.5 percent ANSI/ASME Grade 2A. Enclosure rating: IP65. Used where operator safety is a must. Ideally suited for process, chemical and petroleum industry applications where chemical compatibility and contamination is a concern. Process where pulsation or vibration exist.

Manufacturer: Fluke Brand: Fluke Model: 4561297

Replacement Probe Tips for Fluke Battery Analyzers is for use with Fluke BT520 and BT521 Battery Analyzers Intelligent Probes.

Manufacturer: Fluke Corporation Brand: Fluke Model: FLK-CNX C3003

The CNX C3003 Modular 3-Compartment Soft Case is as versatile as the CNX wireless test tool team. This carrying case contains three adjustable compartments, suitable for the CNX Wireless Multimeter or any of the CNX remote measurement modules. An inner pocket holds test leads and other accessories.

Manufacturer: WIKA Brand: WIKA

NEW WIKA 4334711 332.34 0-30IN-HG 4-1/2 IN 1/2 IN NPT TEST GAUGE D526046

Manufacturer: Winters Brand: Winters Model: PSB646R1Z

StabiliZR dampened movement minimizes effects of pulsation and vibration without liquid filling. Stainless steel case. Bottom mounted. Stainless steel 316 wetted parts. CRN registered. 5 Years warranty. Ideally suited for process, chemical and petroleum industry. Where chemical compatibility and contamination is a concern. Dial: 4" white aluminum with black and red markings. Case: AISI stainless steel 304 (dry). Lens: polycarbonate. Ring: AISI stainless steel 304 bayonet. Socket: stainless steel 316. Connection: 1/4" NPT bottom. Bourdon tube: stainless steel 316. Movement: stainless steel 304, dampened. Pointer: aluminum, anodized black, micrometer adjustable. Over-pressure limit: 30 percent. Socket gasket: 2-1/2" (63mm): buna N for two-piece internal socket seal. Fill plug: buna N. Lens ring gasket: silicone rubber. Ambient/process temperature: -40/250 degree Fahrenheit. Working pressure: maximum 75 percent of full scale value. Accuracy: +/-1 percent ANSI/ASME grade 1A. Pressure range: 0-200 psi. RoHS compliant.

Manufacturer: Winters Brand: Winters Model: PSB644Z

StabiliZR dampened movement minimizes effects of pulsation and vibration without liquid filling. Restricted orifice standard on dual scale. Stainless steel case. Bottom mounted. Stainless steel 316 wetted parts. CRN registered. 5 Years warranty. Ideally suited for process, chemical and petroleum industry. Where chemical compatibility and contamination is a concern. Dial: 4" white aluminum with black and red markings. Case: AISI stainless steel 304 (dry). Lens: polycarbonate. Ring: AISI stainless steel 304 bayonet. Socket: stainless steel 316. Connection: 1/4" NPT bottom. Bourdon tube: stainless steel 316. Movement: stainless steel 304, dampened. Pointer: aluminum, anodized black, micrometer adjustable. Over-pressure limit: 30 percent. Socket gasket: 2-1/2" (63mm): buna N for two-piece internal socket seal. Fill plug: buna N. Lens ring gasket: silicone rubber. Ambient/process temperature: -40/250 degree Fahrenheit. Working pressure: maximum 75 percent of full scale value. Accuracy: +/-1 percent ANSI/ASME grade 1A. Pressure rang: 0-100 psi/kPa. RoHS compliant.