Pressure Gauges - Page 60

Manufacturer: PERMA CAL INDUSTRIES Brand: PERMA CAL INDUSTRIES Model: 111TID15A23

Perma-Cal P/N 111TID15A23 (Dial Trim: Dampening | Misc. Options: NONE) Perma-Cal® Industries, Inc. has been a leader in quality and design of Direct Drive (helically wound bourdon tube) pressure gauges for over 35 years. Reliable in the most rugged environments, Perma-Cal® Industrial Gauges are designed to withstand hostile applications, including intense vibration, shock, pulsation and overpressure. Design standards meet or exceed most industrial, aerospace & military specifications. What's the Difference? | Superior Reliability: Manufactured using Direct Drive technology, Perma-Cal® Pressure Gauges feature a helically would bourdon tube, only one moving part, no gears, linkages, or springs to wear or break, and no liquid fill. This allows the gauge to endure rugged conditions unsuited for traditional c-tube type gauges. Perma-Cal® gauges can also withstand a 50% overpressure without going out of calibration. | No Liquid Fill: Perma-Cal® provides a longer life gauge than liquid filled gauges without the leaking or discoloring problems of liquid fill. Perma-Cal® gauges are internally dampened to eliminate pointer flutter. | 100% American Made: Proudly, Perma-Cal® manufactures its industrial pressure gauges in Minden, NV using only American made parts. Aspects of the manufacturing process not completed in house are outsourced to support local small businesses. | Reduced Cost of Ownership: In addition to reduced risk of failure by having only one moving part, Direct Drive design produces a gauge which withstands more cycles and outlasts its competitors significantly reducing the ongoing cost of ownership. | Safety Comes Standard: Perma-Cal® Pressure Gauges are designed to the utmost standard of safety. A very low volume elastic element, rear blowout features and a solid front case produce the safest gauge possible. Also, not all Direct Drive gauges offer a solid front case.

Manufacturer: Parker Hannifin Brand: Parker Hannifin Model: 06H22A18A2BCW

Compressed air filters remove pollutants and submicronic contaminants from clean air in compressed air handling and preparation systems. Clean compressed air provides and controls energy, conveys materials, and is critical to the safe operation of equipment in many industries. Compressed air filters remove particulates (dirt), oil, water, and oil vapor. They can be combined with other units, integrating with either a regulator, which controls excess pressure for better performance, or a lubricator, which adds oil mist to the air, or both. They are typically constructed of metal, such as zinc or type 316 stainless steel, or transparent polycarbonate, and are available with optional indicators, gauges, and drain configurations depending on the application. Compressed air filters are used in a wide range of applications, including food processing, electronics, health care, and instrumentation, among others.Parker Hannifin manufactures electromechanical, hydraulic, and pneumatic motion technologies and systems for liquid handling, filtration, sealing and shielding, climate control, process control, and aerospace applications. The company, founded in 1918, is headquartered in Cleveland, OH.

Manufacturer: COLE-PARMER Brand: Mid-West Instrument

Mid-West differential pressure indicating switches are designed to measure pressure drop across Filters, Strainers, Separators, Valves, Pumps, Chillers, etc. as well as for local flow indication and control. Basic gauge function is to measure the difference in pressure between two points in a system, the differential pressure results are displayed on the gauge dial. Cost Efeective, Simple, rugged, compact design Over-range protection to max pressure Hermetically sealed switches Weatherproof rated to NEMA 4X/IP65 Operating Temp -40 to 200° F (-40 to 93°C) ±2% Accuracy Full Scale Ascending Five year Limited Warranty

Manufacturer: Parker Brand: Parker Model: 06B14A18A4BC

This Parker 06B compact series three-unit combination compressed air filter/regulator/lubricator (FRL) is for decontamination and air preparation in a compressed air system. This three-unit module combines a filter, regulator, and lubricator (FRL) for space-saving installations. Its large filter element surface allows for low pressure drop and increased element life, and a deflector plate with a shroud swirls the air stream, ensuring that water and dirt are properly separated. The regulator can be mounted with the knob in the up or down position to suit specific installation requirements, and it has male National Pipe Taper (NPT) threads for connecting to female threaded pipes. This filter is suitable for use in manufacturing and automated production environments. Compressed air filters remove pollutants and submicronic contaminants from clean air in compressed air handling and preparation systems. Clean compressed air provides and controls energy, conveys materials, and is critical to the safe operation of equipment in many industries. Compressed air filters remove particulates (dirt), oil, water, and oil vapor. They can be combined with other units, integrating with either a regulator, which controls excess pressure for better performance, or a lubricator, which adds oil mist to the air, or both. They are typically constructed of metal, such as zinc or type 316 stainless steel, or transparent polycarbonate, and are available with optional indicators, gauges, and drain configurations depending on the application. Compressed air filters are used in a wide range of applications, including food processing, electronics, health care, and instrumentation, among others.Parker Hannifin manufactures electromechanical, hydraulic, and pneumatic motion technologies and systems. The company, founded in 1918 and headquartered in Cleveland, OH, provides fluid handling, filtration, sealing and shielding, climate control, process control, and aerospace technologies.

Manufacturer: Winters Brand: Winters Model: P3S6181

The Winters P3S 300 series pressure gauge with stainless steel wetted parts has a circular dual scale dial that is enclosed in an aluminum case and a lower mount male connection with NPT rate, and measures pressure with a display accuracy of + or - 0.5%. The stainless steel wetted parts provide corrosion resistance. The circular dial is white aluminum, 4.5" (115 mm) or 6" (150 mm) in diameter, and enclosed in an aluminum case that is painted black and Ingress Protection certified IP52 for protection against dust and liquids. The front flange is polished stainless steel. The dial has an aluminum anodized black pointer that is micrometer-adjustable for ease of calibration, and the lens is glass for clarity. The gauge measures pressure with a dual scale of psi/kPa or Hg. vacuum/kPa. The gauge is accurate to + or - 0.5% over the entire range of the gauge, or American Society of Mechanical Engineers (ASME) B40.100 Grade 2A accuracy class. The male connection is mounted on the bottom of the gauge and has either a 1/4" or a 1/2" NPT (National Pipe Thread) rate. The ring for the gauge is polished stainless steel. The bourdon tube is stainless steel 316L. The welding is stainless steel 316L tungsten inert gas (TIG) for strength. The over-pressure limit is 30% for pressures up to 600 psi (4,137 kPa), 25% for pressures from 600 to 1,400 psi (4,137 to 9,653 kPa), and 15% for pressures over 1,400 psi (9,653 kPa). The working pressure is a maximum of 75% of full scale value. The operating temperature is -40 to 150 degrees F (-40 to 65 degrees C). This pressure gauge is suitable for boiler and control room applications with air, steam, oil, and fresh waterPressure gauges are instruments used to measure the pressure of a gas or liquid inside a vessel and, often, to help ensure the optimal amount of pressure for a given application. Pressure gauges can range from everyday instruments, such as those used to measure the air pressure in a car or bicycle tire, to highly accurate gauges used in mechanical and industrial processing. Mo...

Manufacturer: 3D Instruments Brand: 3D Instruments Model: 25504-21B71

3D Instruments 25 series Accu-Drive test gauges incorporate the "Direct Drive Difference" Inconel helical bourdon tube system. The "Direct Drive Technology" concept couples the bourdon tube directly to the shaft-pointer, thereby streamlining the design and reducing the number of moving parts from approximately twelve down to one. Thirty years of industrial application have proven that this design is vastly superior to the C-bourdon tube/movement system incorporated in the traditional pressure gauges specially for vibration and pulsation. The Series 25 "Direct Drive Difference" approach applies silicone dampener directly to the bourdon tube. This "coil dampening" approach isolates the pointer from vibration and pulsation, thereby eliminating the requirement for liquid filling of the gauge case. In most instances, a standard 3D Accu-Drive pressure gauge can directly replace an "old fashioned" liquid filled gauge without creating the maintenance headaches cited above. When compared to a liquid filled gauge, the Accu-Drive gauges have been shown to last as much as ten times longer in applications with extreme pulsation and vibration. The net effect of these benefits, coupled with a 6 year product warranty. Additionally, because of a lack of gears and wear points, the Accu-Drive series of gauges maintain their rated accuracy over the entire life of the gauge without the need for costly periodic recalibration. The Series 25 Accu-Drive pressure gauges utilize the finest materials of construction. The bourdon tube is constructed of Inconel, a highly elastic material with excellent corrosion resistance. All other "wetted parts" are 316 Stainless Steel. The balance of the gauge hardware is designed to minimize corrosion associated with challenging field environments. The extremely robust bourdon tube system offers outstanding overpressure protection to 150% of full scale. -65 to +190 degrees F temperature range.

Manufacturer: Parker Brand: Parker Model: 06B22A18A2BC

This Parker 06B compact series three-unit combination compressed air filter/regulator/lubricator (FRL) is for decontamination and air preparation in a compressed air system. This three-unit module combines a filter, regulator, and lubricator (FRL) for space-saving installations. Its large filter element surface allows for low pressure drop and increased element life, and a deflector plate with a shroud swirls the air stream, ensuring that water and dirt are properly separated. The regulator can be mounted with the knob in the up or down position to suit specific installation requirements, and it has male National Pipe Taper (NPT) threads for connecting to female threaded pipes. This filter is suitable for use in manufacturing and automated production environments. Compressed air filters remove pollutants and submicronic contaminants from clean air in compressed air handling and preparation systems. Clean compressed air provides and controls energy, conveys materials, and is critical to the safe operation of equipment in many industries. Compressed air filters remove particulates (dirt), oil, water, and oil vapor. They can be combined with other units, integrating with either a regulator, which controls excess pressure for better performance, or a lubricator, which adds oil mist to the air, or both. They are typically constructed of metal, such as zinc or type 316 stainless steel, or transparent polycarbonate, and are available with optional indicators, gauges, and drain configurations depending on the application. Compressed air filters are used in a wide range of applications, including food processing, electronics, health care, and instrumentation, among others.Parker Hannifin manufactures electromechanical, hydraulic, and pneumatic motion technologies and systems. The company, founded in 1918 and headquartered in Cleveland, OH, provides fluid handling, filtration, sealing and shielding, climate control, process control, and aerospace technologies.

Manufacturer: Fluke Brand: Fluke Model: 4637005

The new Fluke PRV240 Proving Unit is an easy-to-use, easy-to-sell product that will be in demand by environmental health and safety managers, plant safety officers, facilities managers and other managers concerned with electrical safety and compliance.

Manufacturer: Fluke Brand: Fluke Model: A3001 FC - Fluke

A true-rms current clamp meter that wirelessly relays measurements to other Fluke ConnectTM enabled master units, listed below.  Fluke 3000 FC DMM Fluke Ti200/300/400 Infrared Camera PC via optional pc3000 FC Adapter  Fluke Connect Mobile app The iFlexTM Wireless Current Module allows you to measure around awkward sized conductors or get into tight spaces and makes wire access easier.    Fluke Connect See it. Save it. Share it. All the facts, right in the field. Fluke Connect with ShareLive TM video call is the only wireless measurement system that lets you stay in contact with your entire team without leaving the field. The Fluke Connect mobile app is available for Android TM and iOS and works with over 20 different Fluke products-the largest suite of connected test tools in the world. And more is on the way. Go to the Fluke website to find out more. Make the best decisions faster than ever before by viewing all temperature, mechanical, electrical and vibration measurements for each equipment asset in one place. Get started saving time and increasing your productivity. Supported smart phones: AndroidTM 4.3 & up iPhone® 4s & later

Manufacturer: Parker Hannifin Brand: Parker Hannifin Model: 16A34A13A4BC

Compressed air filters remove pollutants and submicronic contaminants from clean air in compressed air handling and preparation systems. Clean compressed air provides and controls energy, conveys materials, and is critical to the safe operation of equipment in many industries. Compressed air filters remove particulates (dirt), oil, water, and oil vapor. They can be combined with other units, integrating with either a regulator, which controls excess pressure for better performance, or a lubricator, which adds oil mist to the air, or both. They are typically constructed of metal, such as zinc or type 316 stainless steel, or transparent polycarbonate, and are available with optional indicators, gauges, and drain configurations depending on the application. Compressed air filters are used in a wide range of applications, including food processing, electronics, health care, and instrumentation, among others.Parker Hannifin manufactures electromechanical, hydraulic, and pneumatic motion technologies and systems for liquid handling, filtration, sealing and shielding, climate control, process control, and aerospace applications. The company, founded in 1918, is headquartered in Cleveland, OH.